Lathe / Turning machine

Drechselmaschinen Vorführmaschinen

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Storage location: Nattheim Hnodpovvkt Iofx Afneh

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an almost-new Drechselmeister STRATOS XL woodturning lathe with a 3 HP motor! The demonstration machine is in original condition, meaning you receive the full warranty. Technical Specifications - Center height: 280 mm Hnedpfx Afetpplnsnjh - Swing over bed: 550 mm (expandable up to 1,000 mm with optional extension bed and outboard turning attachment) - Distance between centers: approx. 780 mm (expandable!) - Spindle thread: M33 x 3.5 with ASR (European) safety groove - Spindle and tailstock Morse taper: MK2 - Inverter drive (3 belt speeds): - Speed 1: 60 – 1,200 rpm - Speed 2: 100 – 2,200 rpm - Speed 3: 150 – 3,700 rpm - Tailstock quill travel: 150 mm (with scale) - Tailstock quill with trapezoidal thread and quick-change system (for ER25 drill quill) - Motor: 3 HP - Weight: approx. 320 kg The machine is located in A-5431 Kuchl and can be inspected during our business hours at any time. Subject to prior sale! Shipping via freight carrier: Austria: € 125.00 incl. VAT Germany: € 150.00 incl. VAT South Tyrol: € 180.00 incl. VAT If you are interested in this machine, please provide your complete address via the contact form so that we can process your inquiry professionally. Thank you, your NEUREITER Team Related Keywords: woodturning lathe, lathe, turning machine, wood lathe, woodturning, turning tools, woodturning tools, turning, machine Reference: R-A0117

Condition: good (used), Rotary hammer, chisel hammer, combination hammer, Bosch hammer -Nominal power input: 620 W -Mains connection: 230 V -Drill -div. drills -Suitcase -Weight: 5.5 kg Hsdpfx Afjb A Hxuenenh

Condition: new, Parallel lathe with clutch and display Fervi T085F10 with mechanical clutch, 3-axis display and semi-norton gear box. Available with distance between centers also 2000 and 3000 mm. WITH MECHANICAL CLUTCH, 3-AXIS DISPLAY AND SEMI-NORTON GEAR BOX. EQUIPPED WITH JOYSTICK FOR ENTERING RAPID FEEDS. WITH SINGLE-BLOCK CAST IRON BASE. Technical data: Center height 280 mm Max. diameter over bed 560 mm Max. diameter over carriage 360 mm Max. diameter over pocket 770 mm Tool height 32 mm Distance between centers 1000 mm Bar passage 105 mm Spindle attachment Camlock D1-8 Spindle speed (12) 36 - 1600 rpm Longitudinal feeds 0.063 - 2.52 mm/rev Cross feeds 0.027 - 1.07 mm/rev Hedpfovbquiex Afnjnh Metric threads (22) 1 - 14 mm Inch threads (26) 2 - 28 TPI Tailstock taper CM 5 Motor 400V 50/60 Hz 7.5 kW Coolant pump 400V 50/60 Hz 90 W Dimensions 2500 x 1400 x 1500 mm Net weight 2920 Kg Gross weight 3555.00 kg Accessories included: Self-centering chuck with 3 reversible jaws Ø 320 mm Platform with 4 independent jaws Ø 400 mm Flange Ø 600 mm Mobile steady rest Fixed steady rest Rotating tailstock CM 5 Thread comparator Lead screw protection Turret protection Spindle protection Rear splash guard Quick change turret type C LED lamp Cooling system Electro-mechanical foot brake Quick locking tailstock carriage Oil bath gears Adjustable leveling feet

Condition: new, Year of construction: 2023, functionality: fully functional, center width: 390 mm, center height: 310 mm, overall weight: 61 kg, input voltage: 230 V, spindle speed (min.): 50 rpm, spindle speed (max.): 3,500 rpm, spindle mount: MK 2, power: 0.75 kW (1.02 HP), - Fully cast headstock, tailstock and support for smooth running. - User-friendly operation of the cast iron hand rest. - Induction motor with high torque even at low speeds. - Digital speed display. - Hardened steel edge of the hand rest. - 24-step division for locking the workpiece. - Storage compartment means you always have your tips to hand. - Drive-out mandrel and wrench for tightening the clamping disk. - Pre-drilled holes for lighting the headstock. - Easy mounting of accessories: stand, extension, lighting and mobile base frame. - Machine bed width is 160 mm! Medium-sized LAGUNA 1216 lathe is characterized in particular by its robust elements: Cast iron headstock, tailstock, precisely ground bench bed and tool rest with resistant edge made of hardened steel. Another highlight: ergonomic control panel made of anodized aluminium with duralumin speed control. Working speeds: 50-525, 325-1750, 650-3500 rpm. Stepless speed control with duralumin regulator and change between three gear ratios with a simple lever mechanism. The motor technology ensures high torque even at low speeds. Locking the tailstock at the rear: it does not interfere with work, but is still easy to reach. Ergonomic handles with eccentric lock for a very firm grip. - Type: REVO 1216 - Recommended use: Professional production - Power (230 V): 750 W - Speed: 50-525, 325-1750, 650-3500 rpm - Max. Machining diameter over guideway: 310 mm - Center distance: 390 mm - Spindle thread: M33 × 3.5 mm - Headstock / tailstock taper: MK2 / MK2 - Tool rest / tailstock bore: 17 / 17 mm - Quill adjustment: 63 mm - Hand rest shank size: 25.4 mm (1") - Length × width × height: 750 × 226 × 442 mm - Weight: 56.3 kg Hnodstuuv Nopfx Afnoh - Length x width x height: 750 × 226 × 442 mm - Weight incl. packaging: 61 kg - Packaging dimensions: 920 mm × 380 mm × 520 mm Scope of delivery: - Driver tip - center point - face plate - Hand rest - Punch with brass tip - Key for spindle lock

Condition: new, High quality benchtop bending machine with top of the line features. FLOTT TB 18 Plus (218303) Standard equipment: - Thread cutting device - Control panel with OLED display - Robust, high quality drill head hood with ergonomically inclined front - LED illumination - Quickly adjustable and ergonomic drill depth stop - Infinitely variable speed control via central rotary knob - EMERGENCY STOP button - Thermal overload protection - Spindle stop - Drill protection with electrical fuse - Connection cable with Schuko plug - 3 years warranty for one-shift operation Technical data: Continuous/normal drilling capacity (mm): 18/20 (in E335/ST60). Tapping capacity (depending on pitch): M12 spindle: MK II drilling depth (mm): 100 throat depth (mm): 240 column diameter (mm): 82 Usable working surface (W x L) (mm): 340 x 280 Speed display: Digital Drilling depth display: Digital Drilling depth stop: Quickly adjustable stop ring Feed (mm/rev): by hand Table height adjustment: with toothed rack motor three-phase current - frequency controlled, mains connection 230 V (kW): 0,75 spindle speed stepless (1/min): 30 - 3000 T-slot size (arm), distance (mm), dimension width (mm): number 2, 125, 13/26 Hodpfei Hp Ersx Afnenh spindle/working surface (mm): 155 - 415 (table), 155 - 550 (foot) machine dimension without packing (mm): 355 x 705 x 1065 machine dimension with packing (mm): 570 x 940 x 1612 weight (kg): 170 Note: For all other models, please feel free to contact us.

Condition: used, Year of construction: 1974, turning diameter over bed slide: 480 mm, center width: 1,500 mm, Center Lathe Manufactured by Heidenreich & Harbeck Type Hanseat 480 Fully overhauled in 2012 Technical Specifications Manufactured by Heidenreich & Harbeck Type: Hanseat 480 Year of construction: 1974, fully overhauled in 2012 Control: Conventional Center distance: 1500 mm Hjdswm D Iljpfx Afnsnh Turning diameter over bed: 480 mm Turning diameter over support: 295 mm Spindle speed: 20 – 2190 rpm Dimensions: L 3.50 x W 1.20 x H 1.55 m Machine weight: 1200 kg Equipment - 3-jaw chuck D 250, built-in - Faceplate D 400 - 10 quick-change tool holders - 1 steady rest All information is provided without guarantee. A live demonstration is possible at any time in our exhibition hall.

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister STRATOS ECO woodturning lathe with a center distance of 680 mm. The demonstration machine is in original condition, therefore you receive the full warranty. Technical Data - Center height approx. 230 mm - Machining diameter approx. 455 mm (with optional outboard turning attachment up to 800 mm!) - Center distance approx. 680 mm (extendable!) - Spindle mount M33 x 3.5 with ASR (Euro) anti-release groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt stages): 60 – 1,350 rpm and 180 – 3,750 rpm Hedetpxt Rspfx Afnsnh - Quill travel 100 mm (with scale and trapezoidal thread) - Motor: 2 HP (connection: 230 V) - Weight: 177 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Freight shipment rates: Austria: €95.00 incl. VAT Germany: €120.00 incl. VAT South Tyrol: €140.00 incl. VAT Related terms: woodturning lathe, lathe, turning bench, woodturning bench, woodturning, turning tools, wood turning, turning, machine Reference: R-A0117

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Weiler Praktikant VC Plus Precision Lead and Feed Screw Lathe with 3-Axis Digital Readout, Infinitely Variable Speed, Excellent Condition Technical Data: >> Year of manufacture: 2014, Machine no. JD12 >> Centre height: 160 mm >> Swing over bed: 320 mm >> Swing over cross slide: 190 mm >> Distance between centres: 650 mm >> Spindle speeds: 30 – 4000 rpm (infinitely variable) >> Spindle bore: 43 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: MT 3 >> Infinitely variable feed adjustment during operation via potentiometer (override) >> Input of feed rates and thread pitches >> Longitudinal feeds from 0.1 to 6 mm/rev >> Cross feeds from 0.003 to 2 mm/rev >> Thread cutting possible: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.1 to 20 mm >> Weight approx. 1,400 kg >> Spindle brake >> Dimensions: approx. 1.72 m (L), 1.7 m (H), 0.89 m (D) Accessories and Features: >> Weiler digital readout >> Collet chuck (new), collet set NEW from 3 to 26 mm >> 160 mm 3-jaw chuck with 1 set of jaws >> 160 mm 4-jaw chuck with 2 sets of jaws >> Multifix size B quick change toolpost with 3 tool holders >> 1 bed stop >> Splash guard >> Coolant system >> Machine lamp >> Operating manual, spare parts diagram Safety Features: >> Lockable main switch >> Emergency stop button >> Electrically monitored chuck guard >> Automatic disengagement of the respective handwheel when feed is engaged Hnsdpjydczdefx Afnsh VCplus Digital Readout: >> 8 inch color display >> 3 axes for bed, cross, and compound slides >> 99-tool memory >> Spindle orientation stop >> Input of either constant speed or cutting speed >> Feed and threading settings are displayed >> Thread cutting with electronic stop About the machine: Offered here is a Weiler Praktikant VC Plus precision lead and feed screw lathe with 3-axis digital readout. Year of manufacture 2014, in very good condition with original paint. The machine is, of course, fully functional and equipped with new collets and chucks. Take the opportunity to inspect the machine under power at our premises and see its condition for yourself.

Condition: used, Year of construction: 2008, Technical details: Hjdpfx Aeviqybofnonh bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 120 mm bore capacity in cast iron: 60 mm spindle taper MT: MK 4 spindle throat: 350 mm spindle speed:: 50 - 1450 / 18 step U/min feed: automatisch/manuell mm/U Distance spindle/table max.: 25 - 705 mm table clamping surface:: 430 x 430 mm drill table adjustment: 680 mm column diameter: 150 mm distance spindle center to floor plate:: 1210 mm total power requirement: 1,6 kW weight of the machine ca.: 350 kg dimension machine xH: 0,95 x 0,55 x 2,3 m Height-adjustable table(swivel and tilt adjustable ) Table can be swiveled 45° left/right and rotated 360° around the column Thread cutting up to M24 Coolant system A vise is mounted, and a threading device is included with this machine. *