Trapezoidal Sheet Roll Forming Machine

DMMET GROUP 27/200 Smart Trapez

Year of construction: 1978, condition: ready for operation (used), A Haeusler CNC large-format 4-roll plate bending machine is available. Number of rolls: 4, Roll width: 3050mm, Max. prebending plate width: 3000mm, Max. prebending plate thickness: 60mm, Max. rolling capacity at max. plate width and 3500mm bending diameter: 70mm, Roll diameter top/bottom/side: 620mm/600mm/500mm, Max. top roll load: 12000kN, Operating speed: 4m/min, Connected load: 132kW, Weight: approx. 85t. Including cone bending device. Documentation available. An on-site inspection is possible. Bdjdpszka H Aofx Akiei

Condition: new, Year of construction: 2026, The CORMAK HBS275 band saw for cutting tubes, profiles and bars is widely used in all locksmith and metalworking workshops where precision, quality and cutting speed matter. The model is equipped with a 0-60° swivel arm; the saw guides are based on sintered carbide. The frame construction ensures accurate and quiet operation. Machine characteristics The horizontal metal band saw with swivel arm enables cutting in a plane perpendicular to the axis of the material being cut and at any angle within the range from 0 to 60°. The material to be cut can be fed manually or by any mechanical device, while the tool feed is automatic. The blade guides are equipped with special carbide plates and bearings. This has a major impact on blade guidance, service life, straightness, accuracy and cutting quality. Carbide guidance greatly reduces wear of the machine and blade. The machine is equipped with an efficient coolant pump with a closed coolant circuit. The saw arm is made of a single cast-iron casting and, together with the 27 mm wide cutting blade used in this saw, fully enables multi-series cutting of both profiles and solid materials. The vice is located in an adjustable bed and is equipped with a quick clamp. The blade guides are equipped with hard metal plates – sintered carbide and a rolling bearing system. It is precisely the SINTERED CARBIDE GUIDES that are responsible for the precision and straightness of the cut. The arm has been inclined at an angle of 25°, which increases blade durability and improves cutting conditions. A cleaning brush is mounted at the bottom of the arm to achieve excellent cleanliness and blade operation. The machine drive is transmitted via a worm gearbox. The machine has a three-phase motor with two cutting speeds and motor thermal protection. The shape of the upper part of the base forms a tray for draining coolant and collecting chips generated during material cutting. A cast-iron work table with a swivel arm and a control panel on a separate arm is mounted to the base. In the cutting process, the main cutting movement is the movement of the cutting blade, while the feed is the lowering of the arm. The arm lowering speed (cutting speed) is regulated by a hydraulic cylinder. Bdodpfx Aeudi Unokioi The feed speed is adjusted on the saw control panel. Two cutting blade speeds are available: 37.5 and 75m/min. In the lower position of the arm (after cutting the material), the cutting blade drive is switched off automatically. Safety is ensured by cutting blade guards and micro-switches that stop the motor after the cutting cycle is completed or when any guard is opened; additional protection consists of automatic shutdown of the saw in the event of cutting blade breakage. The machine drive is transmitted by a motor with a worm gearbox. The motor with thermal fuse protects against overheating during operation. Technical data TOTAL POWER 1.5kW POWER SUPPLY 400V 50Hz ARM LOWERING ADJUSTMENT hydraulic cylinder BLADE LENGTH 2450 x 27 x 0.9 mm BLADE SPEED 37.5 / 75m/min VICE BASE HEIGHT 900 mm MACHINE DIMENSIONS (WITH ARM RAISED) (L x W x H) 1720 x 800 x 1800 mm WEIGHT 215 kg

Condition: ready for operation (used), Year of construction: 1992, - Double mitre circular saw ADS type M Bedoucuhdjpfx Akijdi - 2 saw heads - max. saw length 5000mm

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Bedpfxsv Ip Egs Akiedi

Condition: good (used), Rolling pressure 220 kN Ø Pieces 3mm min; 70mm max Pitch 6mm max Grooving pitch 2.25mm max Roller width 160mm max Ø Roller 133mm min; 170mm max Roller shaft speed 24 30 38 45 62 72 90 114 rpm Ø Roller carrier shaft 54mm standard; 69.85 special Bedpfovyyyxsx Akijdi Distance between shafts 135mm min; 230mm max Working stroke 15min max Feed rate 0.5mm/s to 6mm/s Laminating time 0.1s to 100s Pause time 0.1s to 100s Main motor 5.5 Kw Electrical power consumption 8.6 Kw Tank capacity 130 L Weight approx 2100 Kg

Condition: new, Year of construction: 2026, For customers from the Baltic States only: Lithuania, Latvia, Estonia. Available models: Cidan F26 (2600 mm x 1.75 mm) F32 (3200 x 1.5 mm ) F41 (4100 x 1.2 mm) Bedpowd Emkefx Akiedi The CIDAN F metal bending machine is characterized by a strong stable frame, is fast and convenient to perform operations. Reinforced side frames ensure stable movement of the clamping and bending beams. The clamping beam operates with the help of an eccentric, which reduces wear of parts during movement to a minimum. This also ensures the best possible opening and closing speed. The eccentric drive eliminates the need for adjustment and parameter adjustment over a long period of time, which ensures a long service life of the clamping motor. During clamping, the eccentrics create a very high clamping force, which is a great advantage when performing double bending (stiffening edges). Software NULINK The control program is designed specifically for CIDAN bending machines, it is user-friendly, so even an inexperienced operator will find it convenient to navigate, program, check and easily design parts. Instructions, notes and tips for the user are presented with the help of interactive graphics. A large number of programs can be stored in the control memory. NULINK calculates the product layout and automatically creates the program. The prepared part is displayed with the actual folding sequence. As an option, you can also choose the OFFLINE add-on, thanks to which you can prepare drawings from a computer in the office. Backrest EGS EGS is a 1020 mm long automatically adjustable backrest for bending machines. It is equipped with one servo motor and belt drives on both sides. It takes less than 2 seconds to obtain an exact position between 2 and 1020 mm. The support plates in the first row are made of spring steel as standard. With one press of the pedal, all supports can be lowered automatically, thus avoiding possible impact of the material when turning it on the worktable. As an option, you can choose another end support FLEXIBLE with a depth of 1550 mm - 4200 mm (more in the options section). Tools: upper clamping, lower and bending beams The bending machine has 3 types of beams: upper clamping, lower and bending. Each of them is equipped with a different type of tools. The upper beam tool consists of 3-4 segments, so only specific damaged segments can be replaced, avoiding greater time and financial costs. Upper beam tool parameters: 30° R1. The bending beam tools are available in three sizes: 7mm, 10mm and 15mm wide. The lower beam tools are sturdy and prevent any sensitive material from being scratched or deformed during clamping. Other tool sizes and types are also available (more in the options section). If you have any further questions, we are always happy to advise you by phone or invite you to see the machine in person.

Condition: refurbished (used), Year of construction: 1976, Work table 500mm x 1200mm Arm travel distance 600mm Tool holder MK 4 Drilling capacity 32mm in steel Thread cutting device Coolant device Bdodpownn S Rjfx Akiji Electronics 24V control voltage Emergency stop 2-channel Safety device on the drill Completely overhauled in 2025 12 months warranty New paint RAL 7035/7031

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE Bodpex N Iclefx Akijdi - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm Bdsdpfx Aevc Amtekiji distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: new, Year of construction: 2026, Metal roof snap lock machine SLP-1 auto with side punching option is the latest project of our company in the direction of equipment for metal roofing production. Snap lock machine SLP-1 auto can produce click-seam panels with fixation holes and punch off side parts of the panels, it makes possible to bend the edge of the panel and join it to the roof elements after. Our machine is equipped with an automation system and make production in a fully automatic mode. This process comes following way: operator of machine put end of metal roll to the pulling rollers of the machine, which moves it to the rolling part of the equipment. At the beginning of the rolling process, two pneumatic punching presses from each side of machine make side cuts of panels. After cutting, the rolling process goes to the next rolling rollers. They gradually form the roofing panel profile and cut out fixation holes with special cutting tool rollers. After rolling, special automatic shear at the end of machine cut off the panel into length with necessary sizes. As machine cuts side parts of panels at the beginning of production process, so it cuts only flat part of panel in the end of production. It makes panel quality better and there are no any deformations as with a profile cutting happens, when guillotine shear has to cut not only flat part but also the lock part of panel. Specifications: Dimensions (mm): rolling machine 3000x1400x900 guillotine shears 400x1120x1130 Weight (kg): rolling machine 643 guillotine shears: 110 Drive power: rolling machine: 1.5 kW, 220V (or 380V on request) guillotine shears: 1.1kW Maximum thickness of sheet metal (mm): 0.6-0.7mm Workpiece Width (mm): 250-700 Rolling speed (m/min): up to 10 Metal roof panel machine SLP-1 auto has an automation system so help to make minimum part of operator works - he just sets necessary number of panels and their length on the computer to produce, and the machine automatically rolls and cuts them. Therefore reducing the influence of the human factor, manufacturing errors are minimum and panels are all the same sizes and ready for further installation. SLP-1 auto click lock roll forming machine has easy width adjustment system, so to change machine from one panel width to another, the operator just needs to turn the adjustment wheel, so the readjustment takes a very short time for such operation. As additional options metal roof panel roll forming machine SLP-1 auto can have: Cutting knife to cut metal from coil at the end of the metal rolling process to reduce the amount of possible waste material; Ribbed panel rolls, to roll narrow or wide ribs in the center of the roofing snap lock panel; Bdsdpjuzv Tzsfx Akisi Microwave panel module- device to form small bends along the entire width of the roofing panel, making the appearance of the roof more interesting and eye-catching. Metal unwinder (can be floor-standing, manual console, automatic console).