Finger jointing line

DIMTER ProfiJoint line 600 KD

Condition: excellent (used), Year of construction: 2012, Set for finger jointing in medium and mass production. The machine is technically efficient and in good condition. Several sets of tools are included. Characteristic: – industrial set with one tenoning machine. Loading the package under the supervision of the operator enables the processing of inferior raw material, – sensitivity controlled by microprocessors /automatic control/, – turning the package after 1 treatment on the turntable (sharp connection) or turning the package on the back (furniture joint with a line; unique GOMA solution), – the set includes an automatic station for loading the press, – the possibility of using cuts on the press, Tenoner with feed table Data Values Milling spindle fi 50x210 mm Spindle speed 6000 rpm 18.5 kW motor Tool dimensions fi 250x160 mm The saw spindle aligns the face Special chipper fi 300x8 mm 6 kW / 3000 rpm motor Stepless feed table Working width x working height 600 x 30-160 mm Glue nozzle outline by tool PRESS FC-10 PZ6/2 Data Values Board width 30-160 mm Jufefe Board thickness 20-70 mm Hjdpjlu D Tfofx Ag Usng The length of the finished board is 6000 mm Pressing force 3 - 7.5 - 10 T Hydraulic power pack 3 kW / 140 bar

Condition: used, Year of construction: 2004, Compact semi-automatic finger jointing line consisting of: - PJ 150/500 milling machine - Transfer table for manual transfer - PJ 7/6100 li single-channel press Hedpfx Aew Nbaceg Usng milling machine: 2 packages / min Press: 2 beats / min Input length: 150 – 700 mm Final length: max. 6,100 mm

Condition: used, Year of construction: 1985, Weight: approx. 3000 kg Dimensions: approx. 3700 x 2000 x 1600 mm Storage location: Nattheim Hnodsvvi Ttjpfx Ag Usg

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, Fully working UniControl 12 year 2006 from Norway - for exact technical specification please open attached document in PDF below. Cross section UniTec 12: - saw unit - edge round cutter from bottom - Hubspindel no.1 - Hubspindel no.2 - Hubspindel no.3 Long , profile section UniVar 12: - Profil cutter - Profil cutter - Profil cutter horizontal - Profil cutter - Profil cutter - Profil cutter Total el power 114 kw 400 V AC Need for suction 270 m3/min Need of compressed air 1000 L/ minMachine was in use until 15.08.2023 Hodpfxjmgc I No Ag Ueng Payment: Prior to loading Delivery: ex. factory Rendalen - Norway Machine is located in Norway ( near to Trondheim) The machine is now disconnected, stored in dry and warm wearhouse, and are ready to be shipped. Rekman Maskin & Service - service of woodworking machines since 1986.

Condition: ready for operation (used), functionality: fully functional, working width: 260 mm, planing height: 170 mm, spindle diameter: 40 mm, planing width: 260 mm, working height: 170 mm, power of feed motor: 4,000 W, spindle speed (max.): 6,000 rpm, spindle speed (min.): 6,000 rpm, height adjustment type: electric, number of spindles: 5, input frequency: 50 Hz, Equipment: cabin, motor brake, Weinig Profimat 23 E Working width: 260 mm, Hjdpfx Aevgnb Reg Ujng working height: 170 mm, 5 spindles, spindle diameter: 40 mm, Spindle arrangement: 1- Bottom - 5.5 kW 2- Right + 3- Left - 11 kW 4- Top - 5.5 kW 5- Bottom - 11 kW Feed rate: 6 - 24 m/min - 4 kW Air cushion in the table One driven roller in the table at the exit. With tool.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: 5-: router to be profiled on the right Hnedpfx Agst R T Hcs Ueg Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Year of construction: 1994, FOUR-SIDED PLANER WEINIG Type: U 23 B.j 1994 Max working height: 180 mm Max working width: 230 mm Hnedpfxsp R N Evs Ag Ujg 6 spindle

Condition: ready for operation (used), Complete kitchen/restaurant/gastronomy/catering/canteen equipment The set includes: 2 Viessmann chambers with dimensions 3600 x 2700 x 2450 mm 4200 x 1800 x 2450 mm (divided into 2 chambers, one of which can work as a freezer and the other as a cold store) Work tables with dimensions: 300 x 70 x 90 cm 200 x 90 x 85 cm 200 x 90 x 90 cm 120 x 70 x 85 cm 300 x 80 x 85 cm 120 x 75 x 90 cm 300 x 80 x 80 cm Sinks with dimensions: 120 x 70 x 90 cm with two sinks 50 x 50 cm 120 x 60 x 85 cm with one sink 40 x 40 cm 190 x 80 x 90 cm with one sink 50 x 40 cm 110 x 58 x 85 cm with one sink with a diameter of 25 cm Lockable cabinet with shelves dimensions: 60 x 55 x 240 cm Dishwasher dimensions 70 x 70 x 200 cm Stoves/ovens with dimensions ELOMA ELH6-1 90 x 80 x 75 cm PAULUX GXA 6-11 90 x 80 x 85 cm ENDERS 42 x 48 x 30 cm 2 pieces Induction cookers EKU C-I-750-EST-4-3.5 with dimensions 80 x 75 x 80 cm PAULUX dimensions 40 x 50 x 35 cm Fryers with dimensions 80 x 80 x 80 PAULUX 80 x 80 x 80 cm 2 pieces PAULUX 60 x 80 x 35 cm Hjdeq A Supjpfx Ag Usng Shelves with dimensions 190 x 50 x 40 cm 3 pieces 140 x 40 x 80 cm Toaster oven dimensions: 40 x 65 x 30 cm 2 pieces Water conditioner Thermos A set of shelves with shelves Hoods with dimensions 320 x 90 x 55 cm 100 x 45 x 60 cm 80 x 55 x 90 cm 160 x 45 x 100 cm 96 x 45 x 100 cm 90 x 80 x 150 cm 60 x 43 x 70 cm And other smaller devices visible in the photos

Condition: new, Working width 3500 mm Working height 2300 mm Hnedpfod Rzc Rsx Ag Ujg Number of cylinders 4 St.

Condition: used, Planer profiling milling machine WEINIG Profimat 26 Super Working width 20 - 230 mm (260) Hedpfjwqda Nex Ag Ujng Working height 8 - 120 mm (140) 5 working spindles Ø 40 mm Long infeed table (approx. 2000 mm) Bottom working spindle 4 kW / left + right 7.5 kW / top 5.5 kW / bottom finishing 5.5 kW Pneumatic pressure of feed rollers Cardan feed infinitely variable 5 - 24 m/min Feed roller before jointer Control - push button operation automatic lubricant pump mechanical digital displays Machine in CE design Year of manufacture 2001 Without machining tools Machine is WORKSHOP OVERHAULED in GOOD CONDITION Machine is connected and ready for demonstration in exhibition center Ex stock Lieboch