Vertical machining center

Deckel Maho DMC 60 U

Condition: excellent (used), Year of construction: 2008, 5-axis simultaneous DMG DMC60U duoblock Very good condition! Operating hours: 78,000 h Spindle hours since replacement: 5,900 h (2022) Lsdjwglnyopfx Al Ijrn 2023: XZ sliding plate replaced The machine can be inspected at any time by arrangement. Control: iTNC530 Heidenhain Travel: X-600 mm, Y-700 mm, Z-600 mm B-axis: -30 / -180° C-axis: 360 ° endless Spindle mount: SK40 Spindle speed: 20 - 12,000 rpm tool magazine: 60 seats Turntable diameter: 630 mm Pallet size: 630 mm x 630 mm Internal coolant supply (IKZ): 40 bar Belt filter system: Belt filter system equipment: Measuring probe, electric handwheel, documentation, two zero-point clamping systems; Belt filter system: Belt filter system

Condition: used, Year of construction: 2017, functionality: fully functional, machine/vehicle number: 8741122, cutting width (max.): 1,370 mm, Equipment: documentation/manual, safety light barrier, 1 Polar Mohr cutting machine Type: N 137 AT HD Machine No.: 8741122 Year of manufacture: 2017 1 Schneider Senator vibrating table Ledszavw Dspfx Al Isrn Type: 1078 Machine No.: 212.554 1 Polar destacking/transfer system (Abstapler-Transomat) Model: 1ER130-4 Machine No. 7993101 Year of manufacture: 2009

Condition: used, Year of construction: 2001, x-travel 600 mm y-travel 700 mm z-travel 600 mm Control Heidenhain Millplus weight of the machine ca. 9 t Lrjdpozdvgljfx Al Ijn

Condition: ready for operation (used), Year of construction: 2004, spindle speed (max.): 15,000 rpm, total height: 2,720 mm, total width: 2,630 mm, overall weight: 10,000 kg, table width: 630 mm, table length: 500 mm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, product length (max.): 4,500 mm, table load: 600 kg, number of slots in tool magazine: 60, swivel angle B-axis (max.): 180 °, swivel angle C-axis (max.): 360 °, number of axes: 5, This 5-axis DECKEL MAHO DMC 60U was manufactured in 2004. It features a spindle speed of 12,000 rpm and a tool magazine with 60 positions, enhancing its versatility for various machining tasks. The Y-axis was replaced in 2023, ensuring improved performance. If you are looking to get high-quality machining capabilities, consider the DECKEL MAHO DMC 60U universal machining centre we have for sale. Contact us for further details. • Spindle taper: SK40 (replacement spindle, max ~2,500 operating hours) • Y-axis replaced in 2023 • Kinematics measured and within specification • Tool magazine: 60 stations • On-machine 3D probe: Hexagon • Year of manufacture: 2004 Additional equipment • Tooling, chuck, vises (details to follow; see attached PDF and Excel) • No robots/automation/chip conveyor/bar feeder information provided in the text above Ljdpfx Aezcqlusl Isrn Technical Specification Taper Size SK 40 Through-spindle Coolant Yes

Condition: ready for operation (used), Year of construction: 1999, functionality: fully functional, Window patcher KOHMANN - 750 - age 1999 Single Stream Length punched min. 100mm / max. 1020mm Width punched min. 80mm / max. 750mm Lrodpoyzyhwefx Al Isn Film length min. 50mm / max. 720mm Width film min. 30mm / max. 540mm Timed bottom Feeder Large Selection of Operating Cams Slitting/perforating Film unwind, Continuous Belt Delivery, Suck Blow Pumps Electrical Control Cabinet Manuals Tools Located: Europe Western Current State: In production Available: Immediately More pictures and video is available. PRICE under request.

Condition: ready for operation (used), Year of construction: 1994, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1994. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel Lodpfozcp Alox Al Ijrn • Automatic pallet changer (RS4 versions)

Condition: excellent (used), Year of construction: 2004, Deckel Maho DMC 60U hi-dyn 5-axis Control: Heidenhain iTNC 530 Spindle speed range: 12,000 rpm Spindle bore: SK40 Number of axes: 5 Travel path: X-axis travel: 600 mm Y-axis travel: 700 mm Z-axis travel: 600 mm Table: Outer length: 630 mm Outer width: 500 mm Internal cooling: Yes, with paper belt filter Blohm tool sizing system Cooling pressure: 40 bar Machine equipped with two 650 x 500 mm pallets Lrjdpfxov Rvp Do Al Ion Machine equipped with 120 tool holders

Condition: new, functionality: fully functional, Year of construction: 2025, Electric Pizza Oven Moretti Forni Neapolis 6 with Proofing Chamber The baking surface inside the oven is made from "Biscotto" brick, which ensures perfect heat distribution across all baking areas, making this oven especially suitable for Neapolitan pizza. Electronic temperature control, independent power regulation for the top and bottom, and coiled heating elements. The oven is equipped with highly insulated, removable doors. Maximum baking temperature is 510°C (950°F). The chamber is constructed from enamelled steel, fitted with castors and safety brake. The maximum chamber temperature is 65°C (150°F). Features: • Heating via coiled bare wire resistors with optimized temperature balancing • Maximum temperature of 510°C (950°F) • Patented self-stabilizing internal deflectors mounted on the oven dome to reduce leakage and ensure even heat distribution • Electronic temperature management with independent control for top and bottom • Continuous temperature monitoring via thermocouple • Adjustable steam circulation via manual valve Standard Equipment: • Mobile oven chamber doors made from stainless steel with enhanced insulation and heat-resistant handle • Stainless steel door supports • Protected lighting with concealed double halogen lamps • Lateral fireproof protection at the chamber entrance • Daily on-timer • ECO-STAND BY TECHNOLOGY™ for workflow pauses • 20 customizable programs • Pre-set programs: temperature rise, average setting, maximum setting, cleaning heat regulation • Separate maximum temperature safety device • Anchor system for lifting • Thermoregulated chamber with internal lighting and concealed controlled castors External Dimensions: External Height: 199 cm External Depth: 137 cm External Width: 108 cm Weight: 525 kg Internal Dimensions: Internal Height: 15 cm Internal Depth: 113 cm Internal Width: 75 cm Baking Surface: (0.84 m²) Total Baking Capacity: Pizza diameter: 330 mm – 6 pizzas Chamber Capacity: Tray cm. (60x40 H7) max 12 Tray cm. (60x40 H10) max 12 Tray cm. (60x40 H13) max 12 Connection and Power: Standard connection: A.C. V400 3N Optional connection: A.C. V230 3 Frequency: 50/60 Hz Max power: 14.7 kW Average consumption: 6.5 kWh Connection cable: H07RN-F 5x6mm² (V400 3N) 4x10mm² (V230 3) Proofing chamber power supply: A.C. V230 1N 50/60 Hz Max power: 1.5 kW Average consumption: 0.8 kWh Lodewyaz Ujpfx Al Ijrn Connection cable: H07RN-F 3x1.5mm²

Condition: used, Year of construction: 2001, Deckel Maho DMC 60U Hi-dyn Machining Center Condition: Used Year of manufacture: 2001 Power-on hours: 56,376 Spindle hours: 26,451 Technical specifications: Travel X/Y/Z: 600 / 700 / 600 mm Motor power: 15 kW (40% duty cycle); 10 kW (100% duty cycle) Spindle speed: 18,000 rpm Tool holder: HSK 63 Magazine capacity HSK 63: 60 tools Equipment: - 3D trajectory control MillPlus IT - Horizontal double gripper tool changer - Automatic swivel milling head - Rotating safety viewing window - NC rotary table with pallet support - Pallet changer - 2 pallets, 630 x 500 mm - Universal milling head with controlled B-axis HSK 63 (only in combination with HSK 63 motor spindle) - Tool holder for HSK-A63 according to DIN 69893 - Electronic handwheel - Operating mode 4: Extended manual intervention - Rinsing gun with pump - Tool breakage monitoring HSK 63, mechanical version, range: 63...310 mm / +/- 3 mm Lredpfx Alsu Rnlue Isn - Intermittent operation chip conveyor - Internal coolant supply switchable from 40 bar to 80 bar

Condition: ready for operation (used), Year of construction: 2004, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: HEIDENHAIN, spindle speed (max.): 12,000 rpm, spindle motor power: 25,000 W, number of axes: 5, This 5-axis DMG DECKEL MAHO DMC 60U RS5 was manufactured in 2004. Ideal for precision vertical machining, this used machine represents a valuable addition to any workshop. Consider the opportunity to buy this DMG DECKEL MAHO DMC 60U RS5 vertical machining centre including a Schuler automation. Contact us for more information. Additional equipment • Tool Changer & Magazine: Horizontal Double Gripper / Magazine Type: Chain Magazine / Capacity: 60 Tool Places / Tool Clamping: According to DIN 69872 / Tool Breakage Control: Mechanical Version • Schuler automation • Coolant Tank: 900 L • IKZ: Form AD with Paper Band Filter • Measuring Probe: Heidenhain TS 641 (Infrared) Lrsdpeyaam Aofx Al Isn • Tool Measurement: Blum Laser for Tool Length & Diameter Measurement Horizontal/Vertical • Rotating Viewing Window Machine Benefits Technical Machine Benefits • Production hours: 54347 operating hours, spindle hours 26748 (new spindle has 3,500 hours) • Universal milling head with controlled b-axis • Very well maintained machine operated for high-end applications • Spindle replacement in 2021 at a cost of approximately 40000 euros • Checkbook maintained Extra Information Disc changer and 4 pallets are included Control 3D Haidenhein contouring control "Millplus IT with Millplus IT handwheel"Optional: more palletsServiced regularlyGeometry protocol dated 5 February 2026Regrinding of the spindle cone: €1,500–€3,000

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: AP-10, type of input current: three-phase, input voltage: 380 V, total width: 7,000 mm, total length: 23,000 mm, nominal power: 20.5 kW (27.87 HP), electrical fuse: 60 A, Mašina za ispravljanje i sečenje armature – Centralni deo mašine je instalisane snage u kW u zavisnosti od modela – Uz mašinu se isporučuje odmotač nosivosti 3t. (vitlo) sa pneumatskom kočnicom – Automatski sto za odlaganje gotovog proizvoda 6 m – Tačnost mašine je ±2mm. – Mašina je automatska Lsdpfxjwyaywj Al Iern – Brzina mašine je od 50-100m/min – Uz mašinu dolaze: dva seta čaura za ispravljanje, dva para noževa i dva para mernih valjaka. Oprema na mašini ● elektro oprema u ormanu Schneider ● svi ležajevi u mašini su FAG ili SKF

Condition: used, Year of construction: 1998, x-travel 600 mm Lrodpfx Aloyutv Te Ijn y-travel 700 mm z-travel 600 mm Control Siemens type Millplus Table dimensions 630x500 mm tool taper ISO 40 Cooling through the spindle 40 bar Tool changer 60 Pos. no. of tables 2 Milling head automatically swivels horizontally/vertically The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2001, operating hours: 85,355 h, functionality: fully functional, machine/vehicle number: 71.405627, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain Millplus, table width: 630 mm, table length: 500 mm, TECHNICAL DETAILS Travel X-axis: 600 mm Travel Y-axis: 700 mm Travel Z-axis: 600 mm Number of pallets: 2 pcs Pallet clamping surface: 500 x 630 mm Max. load pallet changer (one-sided): 600 kg Max. load pallet changer (double-sided): 1,200 kg Max. table plate rotation: 13.6 rpm Feed rate: max. 15,000 mm/min Rapid traverse speed: max. 40 m/min Set-up operation: 2,000 mm/min Magazine positions: 60 slots Max. tool weight: 10 kg Max. tool diameter: 100 mm Max. tool length: 350 mm Measuring System Resolution: 0.001 mm Input increment: 0.001 mm Positioning tolerance: 0.010 mm MACHINE DETAILS Lodpfjyfhahjx Al Iern Control: Heidenhain Millplus Dimensions & Weight Machine without tool magazine: 8,400 kg Weight of tool magazine (60 tool positions): 600 kg Floor dimensions: 4.50 m × 2.72 m × 2.63 m Electrical Data Rated power: 44 kVA Current consumption, maximum: 64 A Current draw: 80 A Supply voltage: 400 V Frequency: 50 Hz Control voltage: 24 V Operating Hours Power-on hours: 96,878 h Spindle hours: 85,355 h

Condition: excellent (used), Year of construction: 2020, operating hours: 860 h, functionality: fully functional, machine/vehicle number: 2426201745, type of input current: AC, working range: 3,000 mm, sheet thickness (max.): 50 mm, sheet thickness steel (max.): 50 mm, table length: 3,000 mm, working width: 2,000 mm, Equipment: documentation/manual, ZINSER 2426 CNC plasma cutting machine with Hypertherm XPR170 VWI Lrodpeza Eufsfx Al Ien Year of manufacture 2020 – Very good condition – including programming software For sale is a well-maintained and little-used CNC plasma cutting machine, type ZINSER 2426, with a Hypertherm XPR170 plasma source. The machine is in very good technical and optical condition and has only been used in our own operations. It is immediately ready for use and can be inspected and demonstrated under power after prior arrangement. Technical data: Manufacturer: ZINSER Type: 2426 Year of manufacture: 2020 Control system: ZINSER CNC 5010 Plasma source: Hypertherm XPR170 with VWI technology Cutting table: 3,000 × 2,000 mm Travel range, longitudinal axis: approx. 4,000 mm Side arm on the right Preparation for the integration of a pipe rotating unit CNC-controlled height control Programming software / nesting software included Special features: The combination of the ZINSER machine and the Hypertherm XPR170 enables precise and economical cutting operations in mild steel, stainless steel, and aluminum. The modern XPR technology ensures excellent cut quality and high process reliability. Another advantage is the existing preparation for a pipe rotating unit, which means that the machine can be easily expanded if required. Scope of supply: ZINSER 2426 CNC plasma cutting machine Hypertherm XPR170 plasma source ZINSER CNC 5010 control system Programming software / nesting software Documentation and manuals Not included in the scope of supply: Extraction system. Location: Austria Inspection and test cut possible after prior arrangement. Disassembly and transport are to be organized by the buyer.