CNC lathe

DAEWOO PUMA300LMB

Condition: used, Year of construction: 2014, controller manufacturer: Siemens, controller model: 840 Dsl - Operate, _____ Description: Year of manuf. : 2014 Control : Siemens 840 Dsl - Operate Turning diam. : 340 mm Turning length : 1185 mm In General: Year of manufacture:2014 Control system:Siemens 840 Dsl - Operate Swivel diameter:540 mm Turning length:1,185 mm Pjdpfx Aezig Tmegdjpw Bar capacity:67 mm Main spindle: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm Bar capacity:67 mm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix 65 Hydraulic clamping:Differential pressure clamping Clamping cylinder:Hollow clamping cylinder Coolant supply:External (chuck flushing) Sub spindde: Technology:Direct drive spindle Speed:5,000 rpm Power:32 kW Torque:360 Nm C-axis:0.001° Chuck:Hainbuch Spanntop Axfix Hydraulic clamping:Differential pressure clamping Coolant supply:External and internal Tailstock function:Mechatronic control of the sub spindle Tool carrier I (X/Y/Z/B): Technology:Milling spindle on a travelling column Milling spindle speed:12,000 rpm Max. power:22 kW Tool holder:HSK 63 X-axis:450 mm Y-axis:200 mm (+/- 100) Z-axis:1,200 mm B-axis:+/- 110° Position measurement systems:Direct (glass scales) Tool carrier II (X/Y/Z): Technology:Tool turret on cross slide Tool drive:Direct drive Speed:10,000 rpm Power:14 kW Torque:34 Nm X-axis:195 mm Y-axis:80 mm (+/- 40) Z-axis:1,200 mm Tool holder:VDI 40 Number of tool stations:12 Steady rest:SLU2X turret steady rest, 8–101 mm Tool magazin: Technology:Chain magazine Number of stations:80 Tool changer:Double gripper Equipment: Position sensors:Direct in X1/Y1/Z1/X2/Z2/Z3 Chip removal:Chip conveyor Coolant supply:CTS system, 20 bar Tool monitoring:Easy Tool Monitor Tool measurement:Tool setter, Renishaw Part removal:Part gripper, conveyor belt Bar feeder:Interface Emulsion mist separator:Mechanical Software option I:5-axis simultaneous milling Software option II:Off-centre turning and milling Software option III:Alternating spindle speed Chucks:2x Hainbuch Spanntop

Condition: like new (used), Year of construction: 2013, functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 1,000 mm, measuring range Z-axis: 600 mm, workpiece weight (max.): 300 kg, The machine is in mint condition, barely used. Complete set with PC and work desk. Ppodpexr Ulpofx Agdow

Condition: good (used), Year of construction: 2008, travel distance X-axis: 4,230 mm, travel distance Y-axis: 1,950 mm, travel distance Z-axis: 750 mm, table length: 4,000 mm, table width: 1,250 mm, table load: 11,000 kg, Portal milling machine KAO MING - KMC 4000 SV-H Double guideway two box way construction Head changer for Multi-Face machining off larger compontents ATC tool changer for Horizontal and vertical milling head swivabel Distance table spindle nose    213 - 1093 mm Distance table spindle center  130 -.mm Indexing Horizontal head 5 Degrees x 72 positions HeidenHain iTNC530 with HR410 handwheel Spindle torq 1018 Nm ISO50 Universal Huron type milling head X - Travel: 4230mm Y - Travel: 1950mm Z - Travel: 750mm Distance between column:1500mm Table Length: 4000mm Table Width: 1250mm Table load: 11000 Feed rate X-Axis: 12000mm/min. Ppedpfxexf E Two Agdsw Feed rate Y-Axis: 15000mm/min. Feed rate Z-Axis: 12000mm/min. Spindle Taper: 50ISO/Bt/Mk Power on spindle: 26kW Speeds / ranges: 4400Rpm ATC / revolver: 30 Chip conveyor: Yes Coolantsystem: Yes Length: 10100mm Width: 4500mm Height: 4250mm Weight: 30000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2016, operating hours: 3,204 h, functionality: fully functional, turning diameter over cross slide: 390 mm, turning length: 562 mm, turning diameter: 390 mm, spindle bore: 76 mm, spindle speed (max.): 4,500 rpm, travel distance X-axis: 230 mm, travel distance Z-axis: 580 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, total height: 1,700 mm, total length: 2,834 mm, total width: 1,628 mm, turning diameter over bed slide: 600 mm, overall weight: 3,500 kg, bar passage: 65 mm, chuck outer diameter: 210 mm, spindle nose: ASA A2#6, Equipment: documentation/manual, Doosan Puma GT 2100 CNC lathe, year 2016, in excellent working condition and ready for production. Reliable and high-performance machine, ideal for precision turning operations in small and medium batch production. Podpfxjy Dunwj Agdopw Equipped with tailstock, 12-position static turret, tool presetting system, 6 boring bar holders, and chip conveyor. Only 3,204 cutting hours. The machine is sold complete with all paper manuals. Robust construction, high accuracy, and excellent productivity. An ideal solution for machine shops and subcontractors looking for a modern CNC lathe fully equipped with accessories. Machine available for inspection under power by appointment.

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Vertical Machining Center DECKEL MAHO DMC 635V Year of manufacture: 2009 CNC control: Siemens 840D Axes X-axis travel (mm): 635 Y-axis travel (mm): 510 Z-axis travel (mm): 460 Distance spindle nose - table surface (mm): 720 Feed rate (m/min): 20 Rapid traverse (m/min): 30 Axis acceleration (m/s²): 5 Work Table Pallet dimensions (mm): 560×790 Max. workpiece weight (kg): 600 Spindle Max. spindle speed (rpm): 14,000 Spindle drive power (kW): 18.5/15 (40%ED/cont) Spindle torque (Nm): 100/74 Tool System Tool holder: SK40 Number of tools in magazine: 20 Electronic handwheel Chip conveyor Blow air through spindle selectable via M function Ppedpfjyay D Uox Agdew Direct measuring system XYZ Machine Operating Hours: Total power-on hours: 14,500 Spindle hours: 3,600 Connected power requirement (kVA): 35 Basic Machine: Dimensions/Weight Length (mm): 2,275 Width (mm): 3,288 Height (mm): 2,670 Weight: 4.5 t Including vices and tool holders

Condition: used, Year of construction: 2007, x-travel 635 mm y-travel 510 mm z-travel 460 mm control iTNC 530 Heidenhain power capacity - main spindel 13 / 9 kW turning speed range - main spindle 20 - 10.000 min/-1 Torque 83 / 57 Nm tool taper SK 40 tension force 10 kN table surface area 790 x 560 mm number of T-slots 4 + 1 T-slot - width 4 x 14H12 / 1 x 14H7 mm Podpfeyaci Hsx Agdspw T-slot - distance 100 mm max. table load 600 kg table height over floor 720 mm number of toolpositions 30 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 300 mm max. tool weight 6 kg Total weight, approx. max. 60 kg feed speeds max. 20.000 mm/min Feed force 5 kN input unit 0,01 mm rapid traverse 30 m/min total power requirement 20 kVA weight of the machine ca. 4,1 t dimensions of the machine ca. 4,5 x 4,0 x 2,8 m CNC-Machining Center Vertikal DECKEL MAHO - DMC 635 V - Spindle-Runtime only approx. 7.883h - Power-On approx. 23.023h

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 635 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 460 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 10,000 rpm, spindle nose: ISO 40, number of slots in tool magazine: 30, Equipment: CE marking, chip conveyor, documentation/manual, VERTICAL MACHINING CENTER DMG MODEL DMC 635V TRAVELS: 635x510x460 mm TOOL CHANGER RANOM 30 POSITIONS SPINDLE 10,000 RPM HIGH PRESSURE THROUGH SPINDLE CHIP CONVEYOR REMOTE HANDWHEEL HEIDENHAIN HR410 Pjdpfx Agsxq E Dasdepw

Condition: excellent (used), Year of construction: 2008, operating hours: 9,521 h, Deckel Maho DMC 835V CNC Machining Center Year of manufacture: 2008 Control unit: Siemens 840D with Shopmill Pjdpsxxpcvofx Agdopw Travel (X/Y/Z): 835mm/510mm/510mm Spindle speed: 10,000 rpm Spindle power: 14kW Table dimensions (X/Y): 1000mm/560mm Table load capacity: max. 800kg Workpiece height: 720mm Tool stations: 20 Tool holder: SK40 Weight: approx. 4,500kg Operating hours: 9,521h Chip conveyor

Condition: new, functionality: fully functional, Year of construction: 2025, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, High-strength welding bed Ppedpsw A Iilsfx Agdow Partitioned smoke extraction system Fully automatic butter injection system Fully automatic cutting, material saving, fast speed Cutting area 4000 × 2000 mm X‑axis travel 1520 mm Y‑axis travel 4020 mm Z‑axis travel 80 mm Max. combined positioning speed 170 m/min Acceleration 2.8 G Machine dimensions (L×W×H) 9500 × 2900 × 2380 mm Footprint 10500 × 3400 mm Net weight 8500 kg

Condition: reconditioned (used), Year of construction: 2003, functionality: fully functional, machine/vehicle number: 055 - 030.0221, Complete overhaul Year 2003 - Fanuc 16i-T Center height 175 mm and distance between centers 650 mm 2 external grinding wheels + B-axis fine adjustment Country of origin: CH Voltage: 3x400V Dimensions: 3680x2165x2100 mm Net machine weight: 5500 kg TECHNICAL SPECIFICATIONS Center height: 175 mm Distance between centers: 650 mm Podpfszbaz Aex Agdepw LONGITUDINAL SLIDE (Z) Maximum travel: 800 mm Speed: 0.001 – 10,000 mm/min Resolution: 0.0001 mm TRANSVERSE SLIDE (X) Maximum travel: 254 mm / SPW 650 Speed: 0.001 – 5,000 mm/min Resolution: 0.0001 mm Maximum weight of workpiece clamped between centers: 80 kg TAILSTOCK Taper: Morse 3 Sleeve: Ø 50 mm Sleeve travel: 35 mm UNIVERSAL GRINDING WHEEL HEAD Left wheel dimension: 500 x 80 x 203 mm Right wheel dimension: 400 x 80 x 203 mm Grinding wheel head power: 12.5 kW Rotation speed: 3,200 min-1 Programmable cutting speed up to: 50 m/s B-axis travel: -15 to +195° B-axis indexing accuracy: 0.0001 ° LEFT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001 ° RIGHT WORKPIECE HEAD Taper: CM3 Power: 4 kW Rotation speed: 1-1000 min-1 C-axis indexing accuracy: 0.001° Hydraulic feed with pressure control Subject to errors and omissions, the technical specifications are provided without commitment. Inventory No. 2250029: STUDER S31 CNC, S/No. 055 - 030.0221 Completely overhauled: Mechanical, geometry, hydraulics, and electrical components (checked and/or replaced) Grinding wheel head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of bearings, replacement of belts, spindle disassembly, replacement of seals and O-rings + adjustment. New paint. Workpiece head Disassembly, cleaning of parts, replacement of worn and defective parts, overhaul of the motor, replacement of belts. New spindle bearings. New paint. Tailstock Disassembled, inspected, overhauled Hydraulics Disassembly, motor check, replacement of pipes, defective and worn parts. Check the hydraulic block. X-axis Disassembly, replacement of worn parts such as O-rings, seals, segments, etc., overhaul of the hydraulic piston, re-grinding of the tables. Z-axis Disassembly, re-grinding of the tables, replacement of worn and defective parts, overhaul of the hydraulic piston, new paint. Electrical cabinet Complete check, replacement of various relays. Paint Colors: White RAL 9003 and gray RAL 7011 Geometry according to manufacturer's protocol. Inspection and cleaning of various accessories.