Vertical machining center

Deckel Maho DMC 835V

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min Klsdpfx Aey Ty A Semreu feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: good (used), Year of construction: 2017, functionality: fully functional, Description: The machine is in good technical condition, and a test run is possible by prior arrangement. Equipped with Siemens Shopturn system, including a bar feeder, and supplied in full configuration. BASIC PARAMETERS Max. turning diameter in working area: approx. 410–500 mm Max. length: 800 mm Distance between spindles: approx. 1020 mm Swing over bed: approx. 700 mm Practical application: ideal for shafts, flanges, and housings up to approx. 800 mm Travels (axes) X: approx. 480 mm Y: approx. 100 mm Z: approx. 800–845 mm B axis: approx. 110° (5-axis machining) C axis: 360° (indexing + interpolation) These features make it a true turn-mill center (not a conventional lathe) Spindles Main spindle speed: approx. 5000 rpm Power: approx. 25–34 kW Through bore: approx. 76–87 mm Sub-spindle speed: approx. 6000 rpm Milling spindle (main difference compared to a standard lathe) Speed: up to 12,000 – 20,000 rpm Power: approx. 19–22 kW Taper: HSK-A63 or Capto C6 Capabilities: milling, drilling, tapping, 5-axis simultaneous operations Tool System Magazine: 24–48 tools Live tools: yes (fully integrated) Kodpfx Aoy Rgafemrjlu Control system: Siemens 840D sl + CELOS (most common) Weight and dimensions Weight: approx. 10,000 kg Dimensions: approx. 6.5 × 2.7 × 2.0 m

Condition: good (used), Year of construction: 2007, functionality: fully functional, Manufacturer DECKEL MAHO DMC 835V Year of manufacture 2007 Control Siemens 840D / Shop Mill X-axis travel 835 mm Y-axis travel 510 mm Z-axis travel 510 mm Spindle speed 10,000 rpm Klsdpsyaywbofx Amrou Feed rate Programmable up to 15 m/min - rapid traverse 30 m/min Positioning tolerance 0.008 mm Tool magazine 30 stations Internal coolant supply and chip conveyor Weight approx. 6.5 t

Condition: used, Year of construction: 2011, x-travel 835 mm y-travel 510 mm Klodpfxex R Em Dj Amrsu z-travel 510 mm distance spindle nose and table 120 - 630 mm control iTNC 530 ERGOLine Heidenhain turning speed range - main spindle 20 - 10.000 min/-1 power capacity - main spindel 13 / 9 kW tool taper SK 40 DIN 69871 max. Torque 130 / 87 Nm table surface area 1.000 x 560 mm max. table load 800 kg number of T-slots 5 T-slot - width 14 mm T-slot - distance 100 mm number of toolpositions 20 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 250 mm max. tool weight 6,0 kg rapid traverse ( X / Y / Z ) 30 m/min feed speeds 1 - 20.000 mm/min total power requirement 23 kVA weight of the machine ca. 4,0 t dimensions of the machine ca. 4,5 x 3,5 x 2,7 m CNC - MachiningCenter Vertical DECKEL MAHO - DMC 835 V New Design - 20,796h operating hours, 7,544h spindle hours

Condition: new, Year of construction: 2026, Drilling and milling machine Kudu with CNC control and tool changer (3-axis) drilling and milling machine with movable processing unit - the table remains stationary, the drill head moves. The drilling machine can be used both manually and fully automatically. After each drilling process, the processing unit moves to the next drilling position fully automatically in the X and Y axes. Operation is kept very simple. The data can be transferred to the machine control using the file formats DXF./DWG. be carried out via a programming station. Alternatively, the system can also be programmed directly on the machine control. The system is very robust and consists of proven machine components. Technical data: • Measuring length: 6,000 mm • Total length: 8,050 mm • Stable machine base • Drilling head speed: up to 2500 rpm (standard version), is supplied with the right speed for your application. Kodpjfu Ivzjfx Amrelu • Tool holder: SK 40 • Drive of the X, Y and Z-axes via servomotors • Rapid traverse in the X-axis: 20 m/min • Rapid traverse in the Y-axis: 5 m/min • Distance from upper edge of table to lower edge of tool holder 400 mm • Table width 480 mm • Working height: 1050 mm • Drilling diameter: 3 to 30 mm in St. 50 (depending on the tool) • Tapping: M4 - M30 (with compensating chuck) • Machining path in the Y axis: 300 mm • Tolerance in the X axis: + - 0.1 mm • Tolerance in the Y-axis: 0.06 mm • Tolerance in the Z-axis: 0.06 mm • Drill head drive motor: 5.5 kW • System weight: 2300 kg • System dimensions: 8050 mm x 3000 mm x 2388 mm (see layout plan) • Power connection: 32 A • Air connection: 8 bar • Protection of the system at the front via light barrier • Access protection at the rear, machine fence • Control touch screen panel 21.5", reinforced front glass • Easy programming on the Machine • Milling of long holes and circles • Lubrication takes place using a minimum quantity spray system • without material vices • Remote maintenance possible using Teamviewer (LAN interface) • Tool memory for drilling tools, with dimensions, speed • Simulation of work processes • Digital hand wheel Your advantages • The surface of the workpieces is protected • Clear, graphic surface • Machining directly at the end of the workpiece is not difficult • 50% space saving compared to pushing machining • Chips are collected in the chip tray • Simplest programming & operation • Minimum quantity spray system (standard) • Programming errors are prevented by CAD /CAM excluded

Condition: excellent (used), Year of construction: 2005, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control SIEMENS Klsdpfxjyxxyys Amrou table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 8.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min drive capacity - spindle motor 13 / 9 kW tool change unit 20 Pos voltage 380 V total power requirement 35 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 3,50 x 3,50 x 2,70 m - Serial-No.: 15415015634 - Main spindle NEW bearings - Machine ON: 18,484 h Program ON: 9,153 h - SIEMENS control system - With NC sub-unit (4th axis, controlled via M-code) - Chip tray (no chip conveyor) - Coolant system

Condition: ready for operation (used), Year of construction: 2006, operating hours: 17,450 h, travel distance X-axis: 835 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller manufacturer: SIEMENS, controller model: 840D with ShopMill, table width: 560 mm, table length: 1,000 mm, table load: 800 kg, overall weight: 4,200 kg, number of axes: 4, This 4-axis DMG DECKEL MAHO DMC 835V was manufactured in 2006. Ideal for precision vertical machining, this used machine maintains robust functionality despite its years. Consider the opportunity to buy this DMG DECKEL MAHO DMC 835V vertical machining centre. Contact us for more information. Additional equipment • Linear Encoder Measuring System • A-axis • Electronic Handwheel • Internal Coolant – 25 bar / 30 l/min • Cabin Roof • New Spindle Bearings Machine Benefits Technical Machine Benefits • Tool mountings: sk 40 Ksdpfx Amjyrd Hwsrslu Extra Information Machine still under power Dimensions Machine Depth 2100 mm

Condition: good (used), Year of construction: 2000, 20000 rpm, tool measurement on table will come, Parts shown by hand not come. Kjdpfx Asr Urm Semrolu

Year of construction: 2006, condition: ready for operation (used), Travel X/Y/Z: 835mm/510mm/510mm, speed: 12000rpm, spindle power: 14kW, table dimensions X/Y: 1000mm/560mm, table load capacity: 800kg, max. workpiece height: 720mm. Tool positions: 20, tool holder: SK40, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 30m/min, feed: 20m/min. Machine dimensions X/Y/Z: approx. 3500mm/3500mm/2700mm, weight: approx. 4500kg, control: Heidenhain iTNC 530, operating hours: 112962h, spindle hours: 30702h. Including chip conveyor, IKZ, distance measuring system. Documentation available. On-site inspection is possible. Klsdpjv H Dgpjfx Amrou

Condition: ready for operation (used), Year of construction: 2005, operating hours: 18,000 h, functionality: fully functional, travel distance X-axis: 800 mm, rapid traverse X-axis: 800 m/min, rapid traverse Y-axis: 500 m/min, rapid traverse Z-axis: 500 m/min, For sale: DMC835V Kitagawa rotary table, controllable via MAC Mini through M-code function. The mounted collet chuck is NOT included, but a 3-jaw chuck is supplied. No internal coolant supply (IKZ) No chip conveyor Electronic handwheel 20-position tool changer Includes 20 SK40 tool holders Loaded free on truck Sinumerik 840D SK40 taper 8000 rpm spindle Kedpfx Amjxur Akerjlu No vices Approx. 9000 spindle hours

Condition: used, System: used piston diaphragm pump / pump Type: HMD-G-50-500 Ksdpfx Asdkdi Temrelu Flow rate: 40.0 m3/h Pressure: 1,6 MPa