Multi blade saw

COSMEC SM320

Condition: excellent (used), chain width 320mm cutting height 120mm max blades diameter 350mm shaft diameter 70mm Lsdpew A H Dhofx Al Ishh shaft speed 3700 RPM two feeding speed iron cast body motor power 37kW weight 2200kgs

Condition: good (used), Year of construction: 2008, functionality: fully functional, heating capacity: 50 kW (67.98 HP), Wood chip heating plant with 50 kW heating output, already dismantled. Lsdpfx Asv Ngq Aol Iohh Complete with boiler and chip storage unit, but without chip discharge system.

Condition: excellent (used), chain width 320m cutting height 120mm Motor power: 30 kW max blade diameter 350mm shaft speed 3700 RPM shaft diameter 70mm Ledjw A H Akjpfx Al Iohh variable regulated feeder 4-24m/min iron cast body

Condition: like new (used), Year of construction: 2019, Used belt dryer New eco tec Model Woody 500-100-1.0 SP Lhedpfjvrd Uqjx Al Ioh Produced in 2019. Like new.

Year of construction: 1999, condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 5, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Lhsdpfx Alsu Damdo Ish

Condition: used, Year of construction: 2011, operating hours: 26,920 h, IRB 6640-235/2.55 Construction year 2011 We can offer you this robot overhauled too! Ledpfxsim Si Ae Al Ishh

Condition: excellent (used), Year of construction: 2023, machine/vehicle number: 0-200-87-0913, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, edge thickness (max.): 3 mm, height adjustment type: electric, total length: 10,825 mm, Equipment: documentation/manual, Used single-sided HOMAG edge-banding machine for straight edges – EDGETEQ S-500 For pre-milling (jointing trimming), gluing and post-processing of various kinds of edging materials. Fixed stop on the left side. Year of Manufacture: 2023 EQUIPMENT / SPECIFICATION BASIC MACHINE - with 80 mm wide conveyor chain with rubber-coated chain pads, - workpiece thickness 8 to 60 mm - top pressure with compound V-belt, automatic height adjustment (to workpiece thickness) - panel support with roller guide, extractable approx. 700 mm - glue roller drive in case of feed stop - hand switch /remote control for setup – mode - adjustable infeed fence with NC-axis (CAN-bus) - Jointing trimming 2 motors each 3 kW (clockwise, counterclockwise), jumping function GLUING SECTION V20, consisting of: - QA65 glue application unit, with PTFE-coating (Teflon), with pneumatically operated glue gates Lodjy D A Swopfx Al Ishh - pneumatic clamping of glue application - Pre-melter for PUR glues - Edge magazine, edge thickness min. 0,4 mm to max. 3 mm Edge width (height) max 65 mm - 2-fold automatic edge roll changing magazine - Pressure zone with automatic horizontal adjustment (NC CAN-axis) to edge thickness, 1 driven & 4 non-driven pressure rollers. POST-PROCESSING SECTION: - Snipping (end-trimming) unit PK25 horizontal, 2 motors, with straight/chamfer cutting function - Edge Trimming MS40 2x0.55 kW, top/bottom - Multifunction Corner Rounding MF60, 2 motors 0.4 kW (top/bottom) with linear motors, soft-touch - Profile (radius-) Scraping MN11, multi scraping tool, automatic positioning and adjustment (NC) - Flat Scraping (glue joint) FA20, top/bottom, (version with 3 tracer rollers), automatic adjustment - Buffing Unit FP10, top/bottom Control / software: - powerControl PC 23 PowerTouch - woodCommander 5 - Edge sequence control - change-over in the gap Machine dimensions 1085 x 180 x 235 cm (with opened doors)

Condition: like new (used), Year of construction: 2015, functionality: fully functional, type of input current: three-phase, power: 45 kW (61.18 HP), input voltage: 400 V, For sale Spanner Biomass cogenerator station with 9 units. Model - BHKW45-8,0-V1.1 Lhodpovcbtrefx Al Ijh Year - 2015-2017 Nominal power - 6x45KW, 3X50KW Voltage - 400V Frequency - 50HZ Current - 3 phase Engine - 8.0L Price shown per unit. 1 unit includes: Biomass gasifier, generator that converts the gas with engine to electricity, separate control cabinets for gasifier and generator. Price is discussable. Please see attached documents. Preferred text communication via e-mail or whatsapp.

Condition: excellent (used), Year of construction: 2012, Used machine from business closure. GROSS shredder Lsdpfx Aox Tp U Rsl Iohh - Model GAZ 62 - Year of manufacture: 2012 - 18.5 kW - good condition - available immediately

Condition: like new (used), Through feed double end trimmer saws. 2x 3kW saw motors. Lhodsif N Sxopfx Al Ioh Feed motor with variator. 300mm to 3100mm end trimming capacity. Suitable for use with a moulder infeed or similar.