1996 Comec FO/OM

Comec FO/OM

Condition: ready for operation (used), Year of construction: 1981, WEINIG Hydromat H25R, S/N 2603-624, year of manufacture 1981, with walk-in acoustic enclosure KASCHWIG – ALMOST NEW from 2017 • Short infeed table with heavy-duty 6-roller infeed 1st spindle bottom 11.0 kW 2nd spindle right 11.0 kW 3rd spindle left 11.0 kW 4th spindle top 15.0 kW 5th spindle bottom 11.0 kW 6th spindle bottom 11.0 kW • Hydraulic feed 6-60 m/min. • Feed motor 22.0 kW • 4x powered table rollers • Spindle diameter 50 mm • Automatic table lubrication • Spindles 1 + 4 + 5 + 6 with counter-bearings • Spindles 1 + 4 with straight jointer • Feed rollers 170 mm Gkjdpfx Aetkt Tpeg Tja • 4 pcs. hydro planer heads 150 mm • 6 pcs. hydro planer heads 250 mm • Extraction hood above the machine

Condition: like new (used), Year of construction: 2023, operating hours: 2 h, Deutz TCD 4.1 L4 Deutz TCD 4.1 L4 EU Stage V / U.S. Tier 4 – EPA (115 kW) Charge air and water cooler Electronic direct injection / common rail Extended idle automation with engine shut-off function ECO and Power mode Temperature-controlled fan drive with reversible fan Spatially separated high-performance cooling system Cooling system with temperature-controlled fan drive Reversible fan for hydraulic oil cooler Jump-start terminals on upper carriage Maintenance flaps, gas-spring assisted with closing aid Automatic central lubrication system, grease reservoir refillable from the ground Rear-view camera Side camera LED lighting package (equipment) LED lighting package (cabin) Gjdsyh A Iispfx Ag Teka Stabilizer blade on the oscillating axle side, width 3m, with integrated cylinder protection Travel direction detection and steering direction reversal Electric steering lock for rigid axle All-wheel drive and all-wheel steering Dual-circuit brake system Powershift transmission Twin pneumatic tires, without intermediate rings 10.00-20 16PR (Trelleborg T900) Wireless tire pressure monitoring Automatic oscillating axle lock Front and roof protection grilles for timber handling machines Rigid cabin system (viewing height 4.00 m) Cabin privacy glazing (side and rear window) Single-pane safety glass Sliding window in cabin door Clear glass roof window Windscreen wiper-washer system (front) Low-frequency suspended comfort driver's seat incl. seat heating and seat ventilation with synchronized armrests / joysticks Joystick steering Automatic climate control Multifunction display Document clip Reach at stick pin: 13m at grab tip: 10.7m Near-field extension for loading stick Level monitoring for coolant and hydraulic oil Attachment filter system Pipe rupture valves for lift cylinder Pipe rupture valves for stick cylinder Basic overload warning system Quick-release coupling on loading stick Wood grab available on request: 1 or 1.25 m³

Condition: used, Year of construction: 2007, spindle diameter: 45 mm, number of spindles: 6, No. 3176 Automatic planer and moulder WEINIG Hydromat 1000 Used, year of construction 2007, machine already dismantled 6 spindles: bottom-right-left-top-top-bottom Electronic feed 6 - 60 m/min Working width 80 - 150 mm Working height 23 - 65 mm Finished slat widths 4 - 15 mm Max. number of slats 16 pieces Slat lengths 400 - 4000 mm 1st spindle horizontal at the bottom Brake motor 11 kW, 6000 rpm Spindle diameter 45 mm Tool flight circle 125 - 180 mm 2nd spindle vertical right Brake motor 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm 3. spindle vertical left 7.5 kW, 6000 rpm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment travel 80 mm Pressure shoe in front of the spindle, swiveling away, pneumatic roller contact pressure 4. spindle horizontal top 15 kW, 6000 rpm, diameter 45 mm Tool flight circle 112 - 250 mm Max. Moulding depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic 5. horizontal top spindle as saw spindle Brake motor 37 kW, 5000 rpm Diameter 45 mm Axial adjustment travel reduced to 25 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm Split pressure shoe in front of upper spindle, adjustable and swiveling away, pneumatic Godpfx Aju Agh Sog Tska 6. horizontal spindle at the bottom as saw spindle Brake motor 30 kW, 5000 rpm Axial adjustment travel reduced to 25 mm Diameter 45 mm Tool flight circle 112 - 250 mm Max. Sawing depth 35 mm Axial adjustment path 45 mm All moulder spindles with high-performance bearings Electronic feed 7.5 kW Adjustment travel of the feed rollers compared to the left-hand spindle, axial 35 mm Shorter roller distance compared to the right-hand spindles Running meter counter, electric, with 2 counters Short infeed table (1.2 m) with 2 driven rollers above the table 1 driven, toothed roller in the table, lateral pressure roller Automatic waxilite pump / lubricant pump Machine with 4-roller extension, pendulum shafts extended to 200 mm 2 driven, toothed rollers in the outfeed table 2 driven, toothed rollers in the machine table Pressure beam before and after upper spindle with mechanical digital display DigiSet (digital double display) for left and top spindles Electrical height adjustment of the upper spindles and the feed Sale on behalf of customer, ex location near 39100 Bolzano (Italy), without dismantling, without transport and assembly Dismantling, loading, and transport by us optionally available Subject to errors in the description and price To avoid any misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to the manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Photos and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: Ex location

Condition: new, Year of construction: 2024, functionality: fully functional, Szárítórendszer - 1T 184 TPR Modell, (Mozgatható Szállítószalagos) Kiváló minőségű szárítórendszert kínálunk, mely ideális fafűrészpor, termény, újrahasznosítandó hulladék, ételipari alapanyagok szárítására. Gsdpfx Asua D U Iog Teka A szárítógép teljesen új állapotban van, eredeti csomagolásában.

Condition: excellent (used), Four-side planer Weinig Hydromat 23C Working width: 230 mm Working height: 160 mm Number of spindles: 7 Spindle arrangement: 1. Bottom 15 kW 2. Right 7.5 kW 3. Left 7.5 kW 4. Top 15 kW 5. Bottom 30 kW (multi-blade saw) 6. Bottom 7.5 kW (hydro support) 7. Top 7.5 kW (hydro support) Spindle speed: 6000 rpm Spindle diameter: 50 mm Gkodjxlcufepfx Ag Toa 4 feed rollers in the worktable Feed speed adjustable via frequency inverter up to 36 m/min Feed drive powered by cardan shaft Pneumatic pressure elements Technical documentation

Condition: good (used), Year of construction: 2008, functionality: fully functional, Production line manufactured by a Canadian company Brunette, which can be described as very powerful and durable. Gksdpfevu D Dwsx Ag Tsa The offer includes a log debarker with feeding tables, bark collection conveyors, as well as a chipper with 630kW installed capacity and a double screw unloading conveyor.

Condition: ready for operation (used), Year of construction: 2002, For sale used Rilesa Unix drilling machine - 4 drilling units top - 4 drilling units rear Gsdpfxou Shx Ds Ag Toka - Right and left

Condition: new, Year of construction: 2016, Technical data: Model SA-1300 Point angle can be continuously adjusted for Ø 2-6 mm from: 118° to 135° Point angle can be continuously adjusted for Ø 6-13 mm from: 90° to 144° Collet set for drill diameters: 3 to 13 mm Collet type: ER 20 Gkedpfx Agsrfb Sj Tja CBN grinding wheel (for HSS drills): Ø 78 mm Optional diamond grinding wheel (for carbide): Ø 78 mm Motor: 120 watts Spindle speed: 5300 rpm Electrical connection: 220 volts / 50 Hz Weight: 10 kg Documentation: Detailed operating manual and machine documentation in German Remarks: The SA-1300 drill sharpening machine is designed for sharpening and pointing 2-flute drills made of HSS or carbide*, in the diameter range of 3 mm to 13 mm. *Carbide drills can only be sharpened with the optional diamond grinding wheel. Spare parts and replacement grinding wheels are available from stock.

Condition: like new (used), Year of construction: 2022, operating hours: 2,574 h, functionality: fully functional, machine/vehicle number: Roboter 1073651 / Steuerung 3100062 / Lineareinheit 152938, load capacity: 210 kg, The KUKA KR 210 R2700-2 (QUANTEC-2) industrial robot system consists of a 6-axis robot with a 210 kg payload and a reach of 2701 mm, combined with a KR C4 controller and a KL 4000 linear unit measuring 12.50 m in length. The system is in used / like-new condition with only 2,574.03 operating hours. Manufactured between 2021 and 2022, this unit is suitable for applications such as material handling, welding, gluing, assembly, and large-scale automation. It comes equipped with software options including SafeOperation, GlueTech, ExpertTech, and Profinet MS, and is supplied with 3x 400V / 25A power. Godoy Ntv Ropfx Ag Toka

Year of construction: 1999, condition: excellent (used), 21 drilling spindles Spindle spacing 32mm Pneumatic clamps Possibility to drill vertically, horizontally and at an angle of 45 * Depth adjustment from 0 to 80 mm Gsdpfxoh Txmtj Ag Tska