CNC lathe

CMZ TC-GL series

Year of construction: 2012, condition: good (used), Muratec MW120 GT for sale Used, in excellent condition. The machine can be viewed by appointment. Delivery is the customer's responsibility, but we can help with packing and loading of need. Bjdpfjifi D Tsx Afnelc Delivery: EXW Székesfehérvár

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Bjdpjw T Sd Tefx Afnjlc Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: used, Year of construction: 2004, MORI SEIKI MT 2000 SZ TURN MILL CENTRE MAKE MORI SEIKI MODEL MT 2000 YEAR 2004 CONTROL MSG 501 SWING OVER CROSS SLIDE 599.5 mm SWING 749.0 mm CHUCK SIZE 250.0 mm DISTANCE BETWEEN CENTRE 1280.0 mm MAX. CUTTING DIAMETER 548.6 mm MAX. CUTTING LENGTH 1018.0 mm BAR CAPACITY 63.5 mm C AXIS 0.001 DEGREE SPINDLE RANGE 4500 rpm SPINDLE MOTOR 20 hp SPINDLE NOSE A2-6 SUB SPINDLE BAR CAPACITY 43.18 mm SUB SPINDLE MOTOR 10 hp SUB SPINDLE SPEED 6000 RPM TOOL CHANGE CAPACITY 60 STATION TURRET 12 STATIONS TRAVEL B AXIS +/- 120 DEGREE Y AXIS +/- 78.7 MM PLUS CNC BARFEED PART CONVAYOR TOOL SETTING PROBE Y AXIS HIGH PRESSURE Bsdpfsuq Iwpjx Afnslc SWARF CONVAYOR FULL SET OF MANUALS GOOD RANGE TOOLING

Year of construction: 2001, condition: used, Cazeneuve Maxica 590 Bjdpfx Afjh Aylvsnslc With collet Control: SOMAB NUM SP + S 5

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. Bedpfx Afoxmhdnenslc For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: good (used), Year of construction: 2008, In good technical condition and fully operational. Year of manufacture: 2008. Additional Y-axis ±60 mm Maximum spindle speed 3,000 min⁻¹ Spindle motor power 22/18.5 kW Maximum driven tool speed 6,000 min⁻¹ - 300 mm chuck with 90 mm through hole, spindle head A2-8 - Increased power and torque 25/30 kW, 1,000/1,300 Nm - Turning diameter 420-500 mm Blsdpfx Afsxdcigsnjc - Turning length 1,250 mm - C-axis, driven tools - NC tailstock, fully programmable, separate motor - Increased Z-axis power - New chip conveyor

Condition: used, Year of construction: 2003, NAKAMURA TOME SUPER NTJ CNC LATHE MAKE NAKAMURA TOME, MADE IN JAPAN MODEL SUPER NTJ Bodpfx Afov I Tx Renelc YEAR 2003 CONTROL FANUC 18 iT B CHUCK SIZE 210.0 mm MAX TURNING DIA. 200.0 mm BETWEEN CENTRES 780.0 mm DRAW TUBE DIA. 80.0 mm TRAVELS: X AXIS: 750.0 mm Z AXIS: 130.0 mm TURRET 2 x 12 STATIONS SPINDLE SPEED Up to 5,000 rpm SPINDLE BORE 65.00 mm SPINDLE NOSE A2-6 PLUS CNC SHORT MAGAZINE BARFEED TURRET TOOLING SWARF CONVEYOR MANUALS

Condition: reconditioned (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 3,500 mm, travel distance Y-axis: 1,250 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 3,000 rpm, spindle speed (min.): 20 rpm, table width: 850 mm, table length: 3,700 mm, overall weight: 18,500 kg, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! Year of manufacture: 2007 Travel / Stroke Capacities: Longitudinal (X): 3,500 mm Vertical (Y): 1,250 mm Cross (Z): 1,000 mm Table dimensions: Length: 3,700 mm Width: 850 mm T-slots: 5 x 22 H12 Reference slot: 1 x 22 H8 T-slot spacing: 140 mm Paintwork: RAL 5011 (steel blue) RAL 7035 (light grey) Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Drive power: 100% duty cycle 24 kW Spindle speed range: Spindle speed: 20-3,000 rpm Torque: 479 Nm Max. feed rate: X, Y, and Z axes 25,000 mm/min Mean acceleration: 2 m/s² Weight: approx. 18,500 kg HEIDENHAIN iTNC 530 HSCI Swiveling control pendant including Heidenhain iTNC 530 control (1 processor / 4 axes) with software options 1 and 2. Automatic Milling Head, Diagonal H4 Automatic indexing Soraluce “Diagonal” milling head, Type H4 / 2 planes with 2.5° x 2.5° indexing, 479 Nm, tool clamping force 18,000 N. Automatic tool changer: Automatic tool changer (random carousel) with 20 magazine positions: The automatic tool change is carried out in the vertical position of the tool spindle. Maximum tool diameter: 125 mm Maximum tool length: 250 mm Maximum tool weight: 15 kg Number of magazine positions: 20 Chip conveyor package: Three chip conveyors, two longitudinal screw conveyors and one cross hinge belt conveyor with integrated coolant tank, discharge height: 1,000 mm Coolant System 2: Coolant/lubricant system 2 with discharge via shower ring and internal coolant supply according to DIN 69871 Form AD, tank capacity 500 l + 150 l lift tank with pump, delivery rate 50 l/min, delivery pressure 5/8 bar. Increased delivery pressure of high-pressure pump from 15 bar. RepairFIT is our proven offer for a profitable entry into our product lines. Bodpfx Asxgn Efjfnelc The machines available in this line are sourced by us following a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, all identified visible defects and faults are professionally repaired by our expert service team.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, turning length: 1,540 mm, turning diameter: 660 mm, Swing over crosslide: 660 mm Turning length: 1540 mm Spindle bore: 91 mm Spindle speed main/sub: 4000/5000 rpm Tool magazine: 76 positions Taper in milling spindle: Capto C6 Milling spindle speed: 12000 rpm Spindle motors: 26/22 kW Max power supply: 200V/255A Year of manufacture: 2013/9 Length: 5825 mm Width: 2850 mm Height: 2750 mm Weight: 15860 kg Blsdjx A E U Nopfx Afnoc Full B-axis Coolant through milling spindle: 70 Bar Knoll 110/700 Part picker & outfeed belt Automatic presetter for lower turret & milling spindle Robot interface (no robot), automatic door & prepared for barfeeder Spindle 2 tailstock function Renishaw OMP60 probe MAPPS-IV CNC 5-axis simultaneous control 5 extra M-codes

Condition: excellent (used), FANUC 21i-T Control Center Height 175 mm Distance between centers 1000 mm Grinding head B-axis 1° Bledpfsyabt Djx Afnec Grinding wheel 500 x 63 x 203 mm Grinding wheel speeds -1'500 rpm Internal grinding attachement 60'000 rpm Work piece spindle head C-axis 0.001 ° Measuring probe Automatic balancing attachement Wheel dresser Misc. accessories MARCELS MASCHINEN AG