CNC turn-mill center

Mori Seiki NL3000Y/1250

Year of construction: 2009, condition: ready for operation (used), Main Drive Number of axis 5 Spindle Speed 3000 RPM Kodsx Sz Dbjpfx Ah Ejwu Spindle motor power 5.5 kW Movement Y-Axis Movement 60 mm This 5-axis MORI SEIKI NL3000Y/1250 was manufactured in 2009. It features a MSX-850 control unit, a 300mm chuck, and a 10-station turret. Capable of a max spindle speed of 3,000 rpm and a rotary tool speed of 6,000 rpm, it's ideal for complex turning tasks. Additional features include a Y-axis movement of +/-60mm and a fully programmable NC tailstock. Contact us for further details regarding this machine. Application Types Turning

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device Kodpfxsxmhdnj Ah Eowu - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request.

Condition: ready for operation (used), Year of construction: 2006, Mori Seiki NL3000Y/1250 Turning Centre (2006) Mori Seiki MSX-850II Control Manufactured & Installed in 2006 Various Live Tool Holders & Various Static Tooling Supplied Tool Setting Arm C & Y Axis Tailstock 12” Chuck Swarf Conveyor Machine Capacity: Max’ Swing over Bed 995mm Kodpfx Ahew Rry Ns Eswu Max’ Swing over Cross Slide 825mm Max’ Recommended Turning Dia’ 420mm Standard Turning Dia’ 310mm Max’ Turning Length 1260mm Max’ Bar Work Dia’ 90mm X Axis Travel 210 + 70mm Y Axis Travel 120mm (+- 60) Z Axis Travel 1370 C Axis 0.001 Spindle: Main Spindle Speeds 3000rpm 2 Spinde Ranges Spindle Nose A2-8 12” Chuck Turret: Number Of Tool Stations 10 Height of Angle Tool Shank Section 25mm Dia’ of Borig Bar 50mm Live Tooling Speeds 6000rpm General Dims: Machine Dims - 4522 x 2291mm Weight 8100Kgs For sale with Jet Machinery Ltd Jet Machinery Stock No: #78830 Machine Serial Number: NL301FJ0675 Cost: £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: good (used), Year of construction: 2015, functionality: fully functional, edge thickness (max.): 12 mm, ENGLISH: Heavy duty edgebander OLIMPIC (SCM Group) in rich configuration suitable for custom made and series production. Machine is equipped with aggregates with servomotors (ABS R1+R2mm + thin edge + solidwood). Kedpswxt Tbefx Ah Ejwu Model: Olimpic K800 TERL Manufacturer: SCM Group Production year: 2015 State: good Edgebanded edges: 238.800 meters Main technical parameters: - feeding speed: 12/18 m/min. (including rounding) - panel thickness: 10-60 mm (including rounding) Equipment and configuration of the machine: - control panel with LCD touch screen STARTOUCH - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment - glue pot with quick change of the glue color Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter) - glue pot with roller "VC/1000" (glue pot with quick-release system) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit "K/SEL" with pneumatic tilting of the blades - radius trimming unit "RI/800" R1mm + thin edges + solid wood (12mm) (3 position pneumatic kit) - 2 motor rounding unit "ROUND K MULTI EDGE" R2mm + thin edge (each motor has: 2 electronic axis with servomotor) - radius edge scrapers "RAS/S 2P" MULTI-EDGE R1+R2mm (each unit has: 2 electronic axis with servomotor) - cleaning spray - glue scrapers "RCA/2C" - brushes"SP/F"

Condition: used, Year of construction: 2019, turning diameter 400 mm turning length 584 mm greates pass round over bed 750 mm control Siemens 828 D Shop Turn spindle passage 81 mm spindle speed: 3500 U/min spindle motor 18,5/22 kW max. torque on the spindle 410 Nm no. of tools in turret 1 12 BMT 65 driven stations 12 BMT 65 speed of driven tools 5000 U/min drive milling spindle MK 5 kW y-axis +/- 60 mm rapid traverse 30/30/10 m/min tail stock MK 5 range L-W-H 4,6 x 1,9 x 2,1 mm weight of the machine ca. 6,65 t CNC lathe with driven tools, Y- axis and sub spindle - 3 jaw chuck Kitagawa Ø 250 mm - Chip conveyor - partscatcher with box into door - signal lamp - 2 +2 driven toolholder - some fixed toolholder - boxway system - tool measuring - programmable tailstock - coolant 23 bar - bigger coolant tank 225 ltr. - double cartridge filter - coolant gun Kedpfxoww Naze Ah Eewu - two steps coolant pressure

Condition: used, mileage: 117,555 km, power: 350 kW (475.87 HP), first registration: 05/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: silver, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, all wheel drive, crane, parking heater, Special equipment: Trailer brake 2-line, trailer coupling: G 150, trailer socket 24V / 15-pin, audio system: CD radio (Bluetooth), 220 Ah battery, aluminum air reservoir, air horn, cab: movable cab entry, cab: comfort suspension (1.8 Hz), 100 A alternator, noise reduction measure 80 dB(A), graphic info display with eco meter, automatic climate control, light and rain sensor, 2-cylinder air compressor, high-performance belt-driven fan, illuminated Mercedes star, MB 2C PTO, programmable special module, rotating beacon left/right, circuit breaker, cab seats: comfort driver's suspension seat with horizontal suspension, sun visor, side window sun blinds, driver and passenger door, 24V cab socket, impact protection grille, steel front bumper, automatic daytime running lights, cross member for trailer coupling, reverse warning buzzer, additional heat insulation, auxiliary air heater, transmission oil cooler Additional features: 2nd steered front axle, emission standard EURO 5, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing hitch, vertical exhaust silencer behind cab, electrically adjustable and heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: M (medium length), suspension: leaf/leaf, electric windows, 16-speed gearbox, rear axle H 7, 13 t, ring gear 300, hydraulic pump (Meiller pump – 6 pistons), body/chassis: chassis for tipper (additional body), body/chassis: tipper, fuel tank: 300 liters, model update from 06/2008, engine 12.0 L – 350 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, voltage converter 24V/12V 8A, steel rims 9.00x22.5, Telligent shift system, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio pre-installation, preparation for phone/fax, immobilizer, heat-insulating glazing, central locking with keys, gross vehicle weight 41.00 t Errors and prior sale reserved Viewing only by appointment Kwjdpfxowz Du Ie Ah Eju WhatsApp inquiries will not be answered

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. Kwedpfx Ahswnx Age Eou The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: new, Year of construction: 2025, operating hours: 671 h, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 450 mm, rapid traverse X-axis: 35 m/min, rapid traverse Y-axis: 35 m/min, rapid traverse Z-axis: 35 m/min, controller manufacturer: Heidenhain, controller model: Heidenhain TNC7, workpiece weight (max.): 1,100 kg, table width: 800 mm, table length: 616 mm, rotational speed (min.): 20 rpm, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Heidenhain TNC7 Spindle HSK-A63 16,000 rpm 30 tool positions Rigid clamping table 800x616 Internal coolant supply 40 bar with paper band filter Scraper belt conveyor Handwheel BLUM LC53-Digilog for tool breakage detection/measurement Touch probe BLUM TC Machine ON: 671 h Spindle ON: 61 h Machine is approx. 6 months old. Kwjdpfxoyf E Ats Ah Eeu Offered for sale on behalf of customer. Inspection possible by prior arrangement.

Condition: ready for operation (used), Year of construction: 2013, operating hours: 8,185 h, travel distance X-axis: 600 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, controller manufacturer: HEIDENHAIN, controller model: iTNC 530, spindle speed (max.): 18,000 rpm, number of axes: 5, This 5-axis DMG DMU 60 evo Linear was manufactured in 2013 and features a travel range of 600/500/500 mm, a spindle speed up to 18,000 rpm, and a tool magazine with 60 positions. It includes a Heidenhain iTNC 530 control, internal coolant at 40 bar, and a scrap belt chip conveyor. Ideal for complex machining tasks. Contact us for more information about this machine. • Tool magazine: 60 positions • Rapid traverse: 80 m/min • Dynamic package • Internal coolant: 40 bar Kjdpfox D Dyasx Ah Eowu • Rotating viewing window • Bed flushing system with flushing gun • Operating hours: 14,471 h • Spindle hours: 8,185 h Additional equipment • Scrap belt chip conveyor • Paper belt filter, 600 liters • Oil and emulsion mist separator • Heidenhain TS 649 touch probe • 3D quickSET toolkit Technical Specification Taper Size HSK 63

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, machine/vehicle number: 14891, Year 2012 with Fanuc 18i-TB Fully inspected by Citizen and ready for production Country of manufacture: JP Voltage: 200V/50-60Hz/3ph. Dimensions: 1400x900x1300 mm Net machine weight: 950 kg TECHNICAL SPECIFICATIONS Kwodpfow T S Ilox Ah Esu Controller: Fanuc Series 18i-TB 6 axes: (X1/Y1/Z1/X2/Y2/Z3) Maximum bar diameter: Ø 4 mm Maximum turning length: 40 mm Main spindle, max. speed: 16,000 rpm (12,000 rpm) Indexing: 1° Maximum speed of driven tools: 8,000 rpm Sub-spindle, max. speed: 10,000 rpm, 1° indexing Tool posts: total of 8 tools Guide bushing unit: standard Technical data provided subject to errors and omissions.