Automatic painting system for chairs or similar products

CM

Condition: excellent (used), Catalogue number 7640 ADVANTAGES – The best wide planing machine for wet and dry timber – Ideal for processing logs, flooring boards, etc. – 2 planing cutterheads + 3 spindles – Manufactured by the German brand KUPFERMUHLE – Used planer, very good condition TECHNICAL SPECIFICATIONS - Max planing width: 610 mm - Max planing height: 200 mm - From above: - Powered feed roller, toothed - Pawls - Pressure mechanism - 2 powered feed rollers, toothed - Pressure mechanism - 610 mm, 6-knife planing cutterhead, 15 kW - Pressure mechanisms - Smooth outfeed roller - From below: - Side pressure at infeed - Guide rail - Infeed table - Powered feed roller, toothed - 610 mm, 6-knife planing cutterhead, 7.5 kW - 2 smooth feed rollers - Side pressure at outfeed - Rear: - 2 side spindles + pressure units: 1) Right vertical spindle 200 mm, 15 kW 2) Left vertical spindle 200 mm, 15 kW - Electrically adjustable left vertical spindle (right/left) - Spindle diameter: 40 mm - Alternate spindle settings - Spindles adjustable: up/down, right/left 3) Additional lower horizontal spindle 160 mm, adjustable up/down and right/left, 5.5 kW - Spindle diameter: 35 mm - At outfeed: 2 upper metal sliding rollers, 2 lower powered rubber rollers - Adjustable rollers in the lower table - Electric height adjustment for planing - 6 feed speeds: 12.8 / 16.3 / 20 / 25.6 / 32.6 / 40 m/min - Feed motor: 8 kW - Extraction port diameters: 2×120, 2x160 mm - Dimensions (LxWxH): 2980 x 1980 x 1800 mm - Weight: approx. 3500 kg Net price: 66,900 PLN Iedpfeyaq Taox Ag Ueht Net price: 15,920 EUR (depending on 4.2 EUR rate) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 1999, No. 6 roller blinds belts, motorized, for drying varnished chairs or similar products (see video) Iedpsyaqy Tjfx Ag Ujht Available dimensions: mt. 4 x 22.5 mt. 4 x 24.5 mt. 4 x 24.5 mt. 2.3 x 27.5 mt. 2.3 x 27.5 mt. 2.3 x 27.5

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 80 linear meters. Towing group: lightweight Caterpillar engine Working speed: min/max 0:9 m/min Motor power: HP 2 D8 chain development and d. 37 rollers: 80 meters Straight track to measure: 72 meters Ihsdpfxoxyi Uuj Ag Uet 90° horizontal bends r= 500 mm: 10 pieces Hook step: 0.80 m

Condition: used, Year of construction: 1999, 1999 CM System D8 Overhead conveyor (painting chain) for handling chairs or similar products, dyed on hooks. 600 linear meters. Ihedpfx Agjxywnio Ust Complete system with 2 rotating disc cups, electrical panels, hooks, various equipment as shown in the photo. Towing group: n.2 medium-sized Caterpillar motorized groups Working speed: min/max 0:9 m/min Motor power: HP 2 + HP 2 D8 chain development and d. 37 rollers: 600 meters Straight track to measure: 531 meters 90° horizontal bends r= 500 mm: 91 pieces Horizontal curves at 30° r=500: 6 pieces 30° vertical curves r=500: 26 pieces Hook step: 0.80 m

Condition: excellent (used), Overhead travelling crane + STAHL ST2010 hoist • Lifting capacity 2000 kg • Length 10.42 m For sale: a complete and fully functional overhead travelling crane with a high-quality STAHL ST2010 chain hoist, offering a lifting capacity of up to 2000 kg. The set is pre-owned but in very good technical condition. ✅ Technical specifications: * Type: Single-girder overhead travelling crane * Beam length: 1042 cm (10.42 m) * Lifting capacity: 2000 kg * Hoist: STAHL ST2010 – proven, reputable unit Iedpfx Agjwcq Epj Ueht * Power supply and cable management along the entire runway * Stable steel construction – ideal for production facilities or industrial workshops

Condition: excellent (used), TECHNICAL DATA - Shaft width: 500 mm - Number of knives: 4 pcs Ihodsx Sx U Repfx Ag Ujt - Max thickness of the processed workpiece: 230 mm From above: - Pawls - Serrated, driven, sequential infeed roller - Pressure units - Planing shaft - Pressure unit - Smooth, driven outfeed roller From below: - Adjustable driving rollers in the lower table: 2 pcs - Motor: 5.5 kW - Electrically operated table lift - Table lift motor: 0.37 kW - Infinitely variable feed speed regulation - Extraction nozzle diameter: 150 mm - Dimensions (LxWxH): 1000x1000x1350 mm - Weight: 690 kg ADVANTAGES – Electric table lifting – 4-knife shaft – Driving rollers in the lower table – Used thicknesser, in very good condition Net price: 16,900 PLN Net price: 4,020 EUR at a 4.2 EUR exchange rate (Prices may vary with exchange rate fluctuations)

Condition: new, functionality: fully functional, machine/vehicle number: 12412802, empty load weight: 540 kg, maximum load weight: 760 kg, overall weight: 1,300 kg, axle configuration: 1 axle, loading space length: 3,150 mm, loading space width: 1,640 mm, loading space height: 2,370 mm, Year of construction: 2026, Loading dimensions approx. 1640 mm x 3150 mm x 2000 mm External dimensions approx. 2150 mm x 4450 mm x 2370 mm Gross vehicle weight: 1300 kg Payload: approx. 760 kg (payload varies depending on additional equipment) Manufacturer: Debon Features - Aluminium box body - Polyester roof and front (aerodynamic) - Pullman V2 low-floor chassis - Floor plate: aluminium floor (anti-slip) - Door/ramp combination (aluminium) - Shock absorbers installed including 100 km/h certification - Lockable side door - Interior lighting with switch - 6 lashing rings on loading floor - Vehicle documents included Additional equipment - Rear supports - Wheel chocks and holders Iedpfxsq T R R Tj Ag Uoht Chassis - Pullman V2 | coil spring suspension and shock absorber | V-drawbar with ball coupling | automatic heavy-duty jockey wheel Electrics - 12 volt | 13-pin connector | marker lights | fog light If you wish to purchase this trailer or have further questions about trailers, please refer to our internal flatbed trailer number "12412802".

Condition: new, functionality: fully functional, machine/vehicle number: 12311667, empty load weight: 530 kg, maximum load weight: 1,470 kg, overall weight: 2,000 kg, axle configuration: 2 axles, loading space length: 3,050 mm, loading space width: 1,550 mm, suspension: other, Year of construction: 2026, Product information "Debon rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Action" Rear tipper DK 155x305cm 2,0t|E-Pump|Grid|Promotion The DK tipper trailer is an extremely practical and safe two-axle car trailer made of aluminum. The generous loading area measures 3.05 x 1.55 meters and the rear tipper can be positioned particularly flexibly for unloading. The folding side walls are 30 centimetres high. With an unladen weight of 530 kilograms, the tipper trailer can be loaded with a payload of up to 1,470 kilograms. The front wall facing the towing vehicle is specially raised. The wooden floor plate of this reverse tipper is covered with a steel plate. The floor frame profile is equipped with six lashing brackets. Convenience is a top priority The loading area can be tilted backwards using an electric pump. An overrun brake prevents the towing vehicle from being pushed by the load when stopping or on slopes. All load-bearing steel frame parts are hot-dip galvanized. Special features Double-walled anodized aluminium drop sides Rear tipper with electric pump + battery Heavy-duty support wheel Mounted grid attachment Further equipment Drop sides Removable, folding Stable screen-printed floor / sheet steel floor on the floor plate Axle and drawbar completely hot-dip galvanized 6 tie-down points in the floor 12 volt electrics, 13-pin plug with reversing light Frame welded and completely hot-dip galvanized. Other documents Vehicle registration certificate part 2 / Accessories available at extra cost - see below - If you would like to buy this trailer or have further trailer queries, please use our internal tipper trailer "No. 1667". Ihjdpfoi R Hv Nsx Ag Uet

Condition: good (used), Spur gear pulley, spur gear chain hoist, chain hoist, chain hoist with trolley, pulley -Load capacity: 500 kg -Hook travel: 3000 mm -Max. beam width: 80 mm Iedpfxsb A Hc He Ag Ueht -Weight: 60 kg

Condition: new, total length: 5,000 mm, total width: 4,250 mm, 21.25 m² storage platform, upper edge 300 cm, 500 kg/m², immediately ex warehouse, accessible with pallet truck, system platform, steel platform, storage level Data : - Length: 5000 mm - Width: 4250 mm - Size can be extended on request - Clear height below the platform: 2612 mm - Support grid: 4605 x 3850 mm - Plus 200 mm overhang of the floor covering - Uprights, cross bracing & dome struts powder-coated in RAL 7016 - Main & secondary beams galvanized - Floor covering: 38 mm chipboard P6, top natural & bottom white - New from stock Wietmarschen Isdpfx Agex Thmlo Uoht - AVAILABLE IMMEDIATELY Storage platform consists of : - 04 x upright - 02 x main beam C+350 - 06 x secondary beam S+260 - 01 x intersection - 02 x strut brace - 10 x chipboard - Incl. connecting material & screws -- IMMEDIATELY AVAILABLE SEVERAL TIMES Price : 2590,00 € net 3082,10 € gross You will receive an invoice with VAT shown. Transportation : The delivery is carried out on request by our partner forwarding agency, the costs for this depend on the postal code. Assembly : If required, our trained staff will be happy to assist you with the professional assembly and disassembly of your factory equipment. Our recommendation : Let us know what you need... We will be happy to help you with the realization of your projects, from planning and ordering to installation. Are you interested or do you have any questions? Simply contact us by message or phone call. You can find our telephone number on our company page. ☎️ You can reach us by phone from Monday to Friday, 08:00 - 15:00. Alternatively, you can send us a message with your name and number and we will get back to you as soon as possible.