Wire feed case

CLOOS CK98A

Condition: used, TECHNICAL DETAILS - table dimensions : 350 x 800 [mm] - T-slots : 7 - strokes, x, y, z : 400, 400, 370 [mm] Nwjdpjuhbxaofx Abkoh - spindle speed : 50 - 2240 [rpm] - feed speed of potentiometer : 0 - 630 [mm/min.] EQUIPMENT - 3 axis display HENDENHAIN - steel sheet retention

Condition: used, Wig welding machine L-TEC, Inverter TIG 200 DC type Njdedzqb Espfx Abkewh WIG welding machine for direct current DC Serial no. 184548, year of manufacture approx. 1994 Power: 200 Amps = 60% duty cycle 155 Amps = 100% duty cycle Adjustment range: stepless Current type: DC (direct current) Mains connection: 400 Volts, 50 Hz, 32 Amps plug - 4 meter hose set with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space requirement L x W x H: 850 x 480 x 740 mm Weight: approx. 150 kg The welding test yields very good results when welding stainless steel with direct current. Otherwise in good condition.

Condition: new, Year of construction: 2025, Protec Welding Turntable, 5000 kg load capacity Variable speed control, 0.05 - 0.5 RPM Handheld remote control Height: 600 mm Nwjdeid Szcspfx Abkeh Diameter: 1500 mm Foot pedal remote control available at an additional cost.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Nwodpfxey Duy Ho Abkjh Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: excellent (used), Year of construction: 2004, Carl Cloos GLC 503 Quinto SD welding machine. A total of 4 units available. Year of manufacture: 2004-2004-1999. Price refers to 1 unit. Nwsdpfxotkuk Ro Abkoh

Condition: not inspected (used), functionality: fully functional, spindle bore: 65 mm, turning diameter: 500 mm, power: 10 kW (13.60 HP), manufacturer: Tool Factory Budapest type: EU500/1500 turning length: 1500mm turning diameter: "over bed": 500 mm above cross slide: 315 mm revolution: 18 degrees. speed range: 25-1250 rpm main spindle hole: 65mm spindle bore: 63mm Nwedpfx Aboqwlmqekjh tip holder insert sleeve cone: 72 metric lathe tip taper: morse 5. main engine power: 10kw mains voltage 3 phases 380V 50Hz machine length: 3400mm total width of the machine: 1210mm height: 1265 mm machine weight: 3550 kg

Condition: like new (used), Tax repair for Heidenhain controls We repair different control types of Heidenhain company for example: TNC 111, TNC 121, TNC 131, TNC 135, TNC 145, TNC 150, TNC 151, TNC 155. Nsdpfxsfica No Abkewh We also have a large number of exchange controls in our range.

Condition: good (used), functionality: fully functional, stroke length: 300 mm, throat depth: 450 mm, controller manufacturer: Delem, controller model: DA65, working width: 4,300 mm, bending force (max.): 300 t, distance between stands: 3,700 mm, control type: CNC control, number of support arms: 2, number of axes: 4, type of crowning: CNC-controlled, actuation type: hydraulic, Equipment: CE marking, centralized greasing system, documentation/manual, emergency stop, finger protection, foot remote control, lower tooling, safety light barrier, upper tooling, Bending capacity: 300 Ton Bending length: 4.300 mm Distance between columns: 3.700 mm Back gauge: 550 mm Stroke length: 300 mm Throat: 450 mm Rapid approach speed: 120 mm/sec. Bending speed: 10 mm/sec. Return speed: 120 mm/sec. Controller: Delem DA65 Featured with: - Y1, Y2, X & R-axis controlled - CNC Hydraulic crowning - Various sets of bending tools - Laser safe curtain Lazer Safe - Machine manual and documentation Country of origin: The Netherlands Motor power: 30 kW Machine LxWxH: 510 x 200 x 330 cm Nedpfxeydpxve Abkswh Machine weight: 21.500 kg

Condition: good (used), Universal screwdriver, construction screwdriver, screwdriver, electronic screwdriver, power screwdriver, electric screwdriver -Nominal power consumption: 600 watts -max. screw capacity: M8 -Speed: 600/1800 rpm Nwsdpfofc Hfvjx Abkoh -Connection: 220 volts -Number: 34 universal screwdrivers available -Price: per piece -Dimensions: 320/200/H80 mm -Weight: 3.3 kg/piece

Condition: used, Year of construction: 1980, machine/vehicle number: 258695, Lg.no. 24444 Technical data: - E.- Hydr. raising/lowering of the saw bow - Saw blade dimensions 400 x 30 x 1.5 mm - Cutting range at 90° - round approx. 210 mm - flat approx. 240 x 190 mm - square approx. 210 x 210 mm - Cutting range at 45° - round approx. 150 mm - flat approx. 150 x 100 mm - approx. 130 x 210 mm - square approx. 145 x 145 mm - Adjustable stroke speeds + cutting speeds - Stroke speeds 62 / 125 m/min - Average cutting speed 16 / 32 m/min - Mitre-adjustable vice with opening width up to 260 mm - E.-Mot. coolant device - Drive 400 V / 1.1 kW - Space requirement approx. W 600 x H 1250 x D 1300 mm - Weight approx. 250 kg Nwodpfou H Acyjx Abkjh