Vertical machining center

CHIRON FZ

Year of construction: 1985, condition: used, Drilling capacity in ST 60 20mm Tapping capacity M16 Milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5.7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM Isdpfx Aaeb Hf I Tecjbc Step change 1.12 Spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y- axis 15 m / min feed force of the X- and Y- axis 6000 N Programmable feed rate in all three axes 1 to 4000 mm/min Projection spindle to guide 300 mm Distance spindle support to table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter at full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. Cut to cut time approx. 3.2 sec. Total connected load approx. 15 kW (but only needs approx. 5~10 kW in operation) Machine weight approx. 3,5 to. Requires commercial compressed air connection

Year of construction: 2010, condition: excellent (used), Chiron FZ 08 KS MAG High Speed Plus Machining Center 1. TECHNICAL DATA Drilling capacity in steel: ⌀ 12 mm thread: M8 Milling capacity in steel: 30 cm3/min tool stations: 24 Spindle nose: HSK-A 40 Ijdsiy D Tmopfx Aacjbc Max. tool diameter: 47 mm / 100 mm Max. Tool length: 160 mm Max. Tool weight: 1.2 kg Chip to chip change time: 2.1 s Speed, main spindle: 30`000 rpm Max. Torque: 11 Nm Spindle power: 9 kW Off-bar package Speed: 8000 rpm Max. torque: 14,3 Nm Bar passage: 32 mm Bar feed, stroke: 460 mm X-axis: 450 mm Y-axis: 270 mm Z-axis: 310 mm Max. feed force / X and Y axis: 2000 N Max. feed force / Z-axis: 3000 N Rapid traverse (X,Y and Z axis): 75 m/min NC swivel head, swivel range: -20° / +115° rapid traverse, B-axis: 60 rpm Floor space requirement: 2.3 m2 Weight: approx. 4000 kg For the correctness, completeness and topicality of the data we do not take over guarantee.

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Isdpfx Ajxnd Npsacobc Main Drive Number of axis 3 This 3-axis CHIRON FZ 18 L was manufactured in 2004. A robust vertical machining center with a weight of 7000 kg, it operates on a 400 V working voltage and a power capacity of 30 kVA. Ideal for those seeking reliable and efficient machining capabilities. Contact us for more information about this machine. Application Types Milling

Condition: used, Year of construction: 2015, functionality: fully functional, machine/vehicle number: 346-09, This machine is equipped with a 2m LNS bar feeder, allowing it to fully automate the production of milled and turned parts directly from the bar stock. On the main spindle, there is an E162 power chuck with a bar capacity of Ø10mm. The bar feeder itself is designed for material up to Ø65mm. Additionally, the machine is fitted with a pneumatically operated two-jaw chuck to allow complete secondary machining of components on the back side. Finished parts can then be removed by an integrated gripper and placed onto the conveyor belt. The machine was retrofitted by CHIRON specifically for precious metal machining. This mainly means that seals within the machine have been reinforced, and the standard chip conveyor was replaced by a drawer unit with a fabric filter. Isdpfx Ajw U Tbceacebc Other features: - High-speed spindle with HSK 40 interface and high-pressure coolant (max. 40,000 rpm and up to 80 bar) - Oil cooler and chip filtration system - Kraft und Bauer fire suppression system with optical sensor - Oil extraction system - Renishaw probe - Integrated tool breakage control/measurement - Tool changer with 64 positions Location: Medical device manufacturer >>>> Collets and tool holders are included in the sale and are part of the listed price.

Condition: excellent (used), Year of construction: 2004, operating hours: 47,000 h, functionality: fully functional, travel distance X-axis: 550 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, For sale is a vertical CNC machining center FZ 15K S five axis high speed including chip conveyor and filter system. The machining center is in excellent condition and can be viewed on site. Ibodevxgx Sopfx Aacsc

Condition: excellent (used), Year of construction: 2017, SIEMENS 840D SL control Working travels 550 x 320 x 420 mm Milling head swivellling +100 / -10 ° Ibsdpowwundsfx Aacjc Spindle taper HSK A50 Spindle speeds -12'000 rpm Tool changer with 64 Pos. Turning spindle 4'500 rpm NC swivel rotary table with B- + C-axis Tool breakage control system Tool lenght measuring device 3D-measuring tracer Misc. accessories MARCELS MASCHINEN CH

Year of construction: 1985, condition: used, Technical manuals and tool holders available; further technical data: Drilling capacity in ST 60 20mm Threading capacity M16 milling capacity in ST 60 up to 20 cm³/min Milling capacity in AL up to 80 cm³/min. Tool holder SK30 Spindle motor - direct current 5,7 kW Speed range/max. torque i 1:1 20 to 6000 rpm with 40 NM step jump 1,12 spindle bearing diameter 50mm Tool clamping mechanical Pull-in force 3000 N feed of the Z-axis 200mm rapid traverse speed of the Z-axis 15m/min feed force of the Z-axis 6000 N feed path of the X- and Y-axis 500 x 250mm clamping surface 630 x 400 mm rapid traverse rate of the X- and Y-axis 15 m / min Feed force of the X- and Y- axis 6000 N Programmable feed in all three axes 1 to 4000 mm/min Spindle overhang to guide 300 mm Distance between spindle and table surface 190 to 390 mm (stroke 200mm) and 190 to 615 mm (stroke 400mm) Number of magazine positions (tools) 12 Tool shank steep taper shank 30 max. tool diameter with full occupancy 63mm max. tool diameter with free secondary places 100mm max. permissible tool weight 5 kg tool change time approx. 1 sec. cut to cut time approx. 3,2 sec. total connected load approx. 15 kW (but needs only approx. 5~10 kW in operation) Machine weight approx. 3,5 to. needs commercial compressed air connection distance measuring systems = glass measuring scales Ibsdsbwn Rhopfx Aacec spindle conveyor with ejection height 850 mm; make: KNOLL type: 240 S-1/150; incl. documents Shifting table for

Condition: ready for operation (used), Year of construction: 2004, General Data Machine weight 7000 kg Main Drive Number of axis 3 This 3-axis CHIRON FZ28 KL was manufactured in 2004. A vertical machining centre with a weight of 7000 kg, it operates on a 400 V working voltage and a control voltage of 230 V. Power capacity is 30 kVA with a rated current of 44 A. Consider the opportunity to buy this CHIRON FZ28 KL vertical machining centre. Contact us for more information about this machine. Iodpoxnd Nisfx Aacjbc Application Types Milling

Condition: ready for operation (used), Year of construction: 1995, Control Unit Brand SIEMENS Model Sinumerik 810D Ibodpfxsxlvccj Aacec Main Drive Spindle speed range 10000 rpm Spindle motor power 95 kW Number of axis 2 Movement X-Axis Movement 550 mm Y-Axis Movement 300 mm This CHIRON FZ 12 W was manufactured in 1995. A vertical machining center featuring a SK30 spindle mount, maximum spindle speed of 10,000 rpm, and a tool magazine with 12 positions. It includes a Sinumerik 810D control system and rapid traverse rates up to 40 m/min. Table size measures 660 x 350 mm. Consider the opportunity to buy this CHIRON FZ 12 W vertical machining center. Contact us for more information. Application Types Milling

Condition: ready for operation (used), Year of construction: 2014, operating hours: 24,209 h, Control Unit Brand FANUC Main Drive Spindle speed range 12000 Spindle motor power 7.5-15 kW Ijdpfx Aaexgi Uzecobc Number of axis 4 Movement X-Axis Movement 730 mm X-Axis Rapid Traverse 75 m/min Y-Axis Movement 400 mm Y-Axis Rapid Traverse 75 m/min Z-Axis Movement 360 mm Z-Axis Rapid Traverse 75 m/min This 4-axis CHIRON FZ 15 W Magnum HS vertical machining center was manufactured in 2014. Ideal for precision machining, it offers robust construction and reliability. Consider the opportunity to buy this CHIRON FZ 15 W Magnum HS vertical machining center. Contact us for more information. Application Types Milling