CNC Machining Center

Chiron FZ 08K S Magnum SK

Condition: ready for operation (used), Year of construction: 2007, operating hours: 22,500 h, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, controller manufacturer: SIEMENS, controller model: 840D, spindle speed (max.): 15,000 rpm, number of axes: 3, This 5-axis CHIRON FZ 08K S Magnum SK was manufactured in 2007. It features a Siemens 840D control unit, with impressive travels of 450 mm in the X-axis, 270 mm in the Y-axis, and 310 mm in the Z-axis. The machine includes a 40-position tool changer and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the CHIRON FZ 08K S Magnum SK vertical machining centre we have for sale. Contact us for further details. • Overhaul: Factory overhauled and technically updated by Chiron (CMS) in 2017 Ledeypb Tpepfx Ad Ajrk • Last Spindle Replacement: September 2025 • Last Maintenance: Major annual service (4,000 h) performed in October 2025 • NC Swivel Head Range: −20° / +115° • Rapid Feed X/Y/Z: 75 m/min • Acceleration X/Y/Z: 1g / 1.5g / 2g • Tool Changer: 40 positions, HSK-A40 • Chip-to-Chip Time: 2.6 s (vertical) • Rotary Table: AWU 160 with D105 mm positioning axis • Operating Hours: Approximately 22,500 h Additional equipment • Clamping: Hainbuch Spanntop D100 collet chuck • Bar Loader: IRCO SiMag 100.1-3000 for round and profile material • High Pressure Coolant: 70 bar with Vario valve • Coolant Filtration: Knoll VRF, 400-liter vacuum rotation filter • Chip Conveyor: Scraper belt, 1,050 mm discharge height • Measurement/Monitoring: Renishaw TS27R 3D touch probe; tool life monitoring; tool breakage control • Collision Monitoring: Brankamp Marposs CMS 100 • Guide Channel Sets: Breuning IRCO sets included (by arrangement) • Collets: Hainbuch collets included (by arrangement) • Tool Holders: Approximately 500 pieces HSK-A40 • Spare Parts: Included for this machine type • Operating Materials: Specific operating fluids/materials included

Condition: used, Year of construction: 1985, x-travel 485 mm y-travel 385 mm z-travel 380 mm table surface area 800 x 460 mm spindle taper SK 40 control CONTOUR 1 Ledetqqllepfx Ad Asrk spindle turning speed range 50 - 2500 U/min feeds 10 - 1000 mm/min rapid traverse 2 m/min table load capacity 600 kg quill stroke 80 mm total power requirement 7,5 kW weight of the machine ca. 2,0 t dimensions 2,4 x 1,7 x 1,98 m Acc.: vertical head with hydr. tool clamping and quill retraction, solid table, coolant - movement of X/Y/Z also possible via handwheels -

Condition: good (used), Year of construction: 2000, High-performance CNC vertical machining centre with SIEMENS 840 D, 2-fold pallet changer, IKZ, linear guides and 30-fold WZW table size 2 x 1000 x 450 mm tool holder DIN 69871 ISO 40 travel X-axis 1100 mm Y-axis 500 mm Z-axis 640 mm speed range 50 - 10.000 rpm table load 600 kg feed range, X/Y/Z, infinitely variable - 10000 mm/min rapid traverse in all axes 30 m/min Drive power 18,5 kW Machine dimensions L x W x H approx. 3605 x 3041 x 3220 mm weight approx. 6700 kg Accessories / special features: - CNC-control SIEMENS 840 D - 2-fold pallet changer - 30-fold tool changer - Full protection cabin with safety doors, electrically protected - High speed up to 10.000 rpm and drive power with 18,5 kW Lrjdpfx Asd I R E Nod Ask - Linear guides with double recirculating roller shoe, allowing high torques to be absorbed uniformly in all directions - Ball screw spindles in all 3-axes - The entire machine bed is made of Meehanit cast iron and ensures precision, rigidity and vibration damping - Tool holder DIN 69871, ISO 40 - Hinged chip conveyor with integrated coolant system - 4th axis already prepared - CE-conform Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 D - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1994, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 430 mm, feed length Z-axis: 400 mm, spindle speed (max.): 3,550 rpm, spindle speed (min.): 17 rpm, For sale is a CNC / conventional milling machine of the Hermle brand and type UWF 802 M The machine is in good - very good condition and ready for immediate use Technical data Year of construction: 1994 Control: Heidenhein TNC 124 Lredervitljpfx Ad Aok Clamping: Rigid angle table Speed: 17 to 3550 rpm Feed: Stepless Drive power: 6 KW Travel X 500 mm Travel Y: 430 mm Z travel: 400 mm Tool holder SK40 Dimensions: L*W*H: 1800*1800*1900 mm Weight: 1.8 t On request, loading and transport (Europe-wide) can be organized for an additional charge. Prices plus VAT Viewing possible by appointment. Please contact us, our team will be happy to help you. Trade-in or exchange possible! Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES AND MUCH MORE. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For further information or contact options, please visit our website

Condition: good (used), Year of construction: 2011, Müga TT - 42, Year of manufacture 2011, Mitsubishi M 700 control, Bar machining up to 42 mm, Sub-spindle, 2 turrets, B-axis: 0.001°, C-axis: 0.001°, Y-axis: 0.001°, Swivel head B-axis: +50°/-140°, Driven tools, Workpiece catcher, Workpiece conveyor belt, Chip conveyor, 2 collet chucks, Short bar loader Müga DH 65 L/1.5 m, Intelligent manual pulse generator (MPG), Reduction tubes. Main spindle X Y Z-axis 20 stations, 6 driven; Sub-spindle Y-axis 22 stations, 6 driven. Bar capacity: 42 mm Spindle power: 7.5 kW Spindle speed: 4,000 rpm Lrsdsxpulkepfx Ad Ajk Equipment: - 2 turrets - Driven tools - Workpiece catcher - Workpiece conveyor belt - Chip conveyor - Intelligent MPG Reduction tubes Accessories

Condition: used, Year of construction: 2005, turning diameter 275 mm turning length 900 mm control TRAUB TX8i spindle passage 65 mm power capacity at 100 % load 25,20 kW power capacity at 40 % load 30,20 KW max. torque at 40% / 100% load 180 / 135 Nm spindle turning speed - stepless 1 - 5.000 U/min spindle diameter in front bearing 110 mm C-axis 1 - 500 U/min worktool support No. 1 x-axis 290 mm y-axis 165 mm z-axis 600/950 mm B - axis 360 ° Lodpfx Aew E Nnbsd Aork rapid traverse X/Y/Z 18 / 18 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN number of tools 2x2 + 2x2 number of driven tools 2x2 + 2x2 mm toolpiece turning speed range 8.000 / 2.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 4x18,6 / 4x74 Nm tool taper TRAUB Ø60 worktool support No.2 / No.3 / No.4 x-axis 170 mm z-axis 600/950 mm y-axis +/- 60 mm rapid traverse X/Y/Z 18 / 15 / 30 m/min feed capacity X/Y/Z 10 / 10 / 7 kN tool turret - number of stations 10 number of driven tools 10 mm toolpiece turning speed range 1 - 6.000 U/min power capacity at 25 % load 5,80 kW max. torque at 25% load 18,60 Nm tool taper DIN 69880 Ø40x63 bar loader DNH61 / 3000 Bar length 1.000 - 3.200 mm bar material dia. 18 - 63 mm hexagon max.45 mm total power requirement 95,00 kW weight of the machine ca. 16,00 t dimensions of the machine ca. 10,00 x 3,50 x H3,00 m With TRAUB TX 8i control unit, main and counter spindle with C-axis, 3 turrets, 1 vertical-tool-carrier with B-axis, dust exhauster, chip conveyor, coolant system with coalescence-separator. Barfeeder TRAUB Stamag DNH61 /3000 2 pc. 3-jaw chuck SMW KNCS-N 170-43 2 pc. HAINBUCH Spanntop chuck 40 pc. various tool holder non-driven 6 pc various tool holder driven Spare parts package Machine can be inspected under power.

Condition: used, Year of construction: 2019, - - - - - - - - - - - - - - - - - - - - - - - - - - - Robot cell | HALTER - LoadAssistent S-230-35 equipped with a FANUC Robot M-20i and a HALTER 3-finger gripper The Robot cell is in a well-maintained condition. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - Ledpfxjxnqzrj Ad Ajrk #Tags: Load Assistent S-230-35 | LoadAssistentS-230-35 | Load-Assistent S-230-35

Condition: good (used), Year of construction: 2005, KITAMURA CNC MYCENTAR 5 YEAR OF CONSTRUCTION 2005 Lodpju Sznpofx Ad Aork CHANGING TABLE X-travel 1200 mm Y-travel 560 mm Z travels 560 mm Type Vertical CNC FANUC 16MA Table length 1200 mm table width 500 mm Tool changer 30 Spindle cone BT 40 Max. Spindle speeds 10000 rpm Weigth 11,000 kg Machine length 6.007 mm Machine width 2,830 mm Machine height 3.305 mm

Condition: used, Year of construction: 2014, Duplo booklet maker System 5000 offer consists of: - 2x collators DC-10/60 - lifting unit LUL-HM - bookletmaker DBM-500 - trimmer DBM-500T - preset kicker DBM-K - conveyor DBM-400LS Duplo System 5000 booklet maker 2xDC-10/60: collator - number of bins: 20 - paper size: width: min. 120mm, max. 350mm length: min. 148mm, max. 500mm - paper weight: 0-300g/sqm - loading volume: 60mm - feeding system: belt suction feed system - conveyance system: roller belt conveyance system - power supply: 120 to 240 V 50/60 Hz - power consumption: 9.5A (120 V 60 Hz), 4.5A(220-240V, 50Hz) DBM-500: stitcher folder - paper size: min. 120x170mm; max. 350x500mm - process speed: >5000 pcs/h, A5 >4600 pcs/h, A4 >4000 pcs/h, A3 - No. of stitches 0 to 2 - stitch thickness within 5mm - wire diameter #25 to #27 - folding capacity: below 25 sheets - dimensions: 2,230 (W) x 865 (D) x 1300 (H) - ratings: 120 to 240 V 50/60Hz 6.5-3.8A - weight: 412kg DBM-500T: Trimmer - booklet size: min. 85x120mm; max. 250x356mm - trimmed booklet size: min. 75x120mm - speed: ut to 5000 sets per hour - power consumption: 120V 690Hz 10A - dimensions: 700mm x 635mm x 1094mm - weight: 532 lbs (241kg) We can also organize the following for you: Lrjdpfxsymx Tbs Ad Ajk packaging, loading, transport ( by ship or plane) including customs

Condition: excellent (used), Year of construction: 2017, Duplo i Saddle Digital Duetto Pro Year of manufacture: 2017 Application: Saddle Stitcher _____ Configuration  With brochure production function  Counter: 1.9 million  Connecting Bridge DSF-DSC Duplo LDR, 2017  2 Collation Towers Duplo DSC – 10/60, 2020  Cover Feeder Duplo DSF-CFL, 2016  Counter Duplo DKT-K, 2017  Head and foot trimming Duplo DKT-200, 2017  Front Trimmer Duplo DBMS-T, 2017  Stitcher Duplo DBMS-S, 2017  Folder Duplo DBMS-F2, 2017 _____ Lodewyvh Djpfx Ad Ajrk Location The machine is currently located in Germany and is available for inspection upon request. _____