1-lamp UV-drying tunnel

Cefla UV TTE 2000

Condition: excellent (used), Year of construction: 2007, I sell the 2-lamp UV-drying tunnel Cefla UV 2000 M2 TTE 2000 Kedpfx Ajyzr Agjmpelr Year 2007 Working width 1400mm. Total length 2,00m Very good condition, available immediately.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 55,771 h, laser hours: 35,157 h, laser power: 3,200 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness aluminum (max.): 8 mm, table length: 3,000 mm, table width: 1,500 mm, travel distance X-axis: 3,000 mm, travel distance Y-axis: 1,500 mm, travel distance Z-axis: 150 mm, positioning speed: 140 m/min, positioning accuracy: 0.02 mm, year of last overhaul: 2024, feed length X-axis: 3,000 mm, feed length Y-axis: 1,500 mm, feed length Z-axis: 150 mm, Equipment: cooling unit, documentation/manual, safety light barrier, The laser is in operation, can be inspected and tested. Regularly serviced in good technical condition. Mirrors completely replaced in 2024. Kodpfov Hxbbox Ampelr

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. Kedpfx Ameyifwpspelr - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 Kledpfxoxn Nlve Ampjr - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Ksdpfxsxazhtj Ampolr

Condition: used, Year of construction: 2001, REISHAUER - RZ 362A - 2001 - used condition as shown on photos Klsdpfx Aoyl Simsmpor - under power, can be tested - more photos available

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, workpiece weight (max.): 1,000 kg, travel distance X-axis: 600 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 310 mm, wire diameter (max.): 0.3 mm, workpiece height (max.): 310 mm, workpiece width (max.): 820 mm, workpiece length (max.): 1,050 mm, feed rate X-axis: 600 m/min, feed rate Y-axis: 1,000 m/min, table load: 1,000 kg, Equipment: compressor, fridge, FANUC Robocut α-C600iA Klodpfxeyhb D Ej Ampjr

Condition: excellent (used), Year of construction: 2002, operating hours: 46,259 h, functionality: fully functional, machine/vehicle number: 11210001263, travel distance X-axis: 1,250 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 10,000 rpm, Control: Heidenhein Mill plus Clamping Table 1000 x 800 mm Taper HSK 100 Toolchanger 120 position Kjdpfx Asxzddtempelr Exchange of tables : 2 tables Coolant tank: 2000l Machine is in running condition, machine has spindle coolig

Condition: excellent (used), Year of construction: 2014, Arburg 420C 1000-290 (2014) e2 Clamping force (max): 1000 kN Opening force | stroke: 250 kN | 500 mm Mould height (fixed | variable, min): 250 mm Platen daylight (fixed | variable, max): 750 mm Distance between tie bars (w × h): 420 × 420 mm Mould mounting platens (w × h, max): 570 × 570 mm Weight of movable mould half (max): 600 kg Ejector force | stroke: 40 kN | 175 mm Dry cycle time (EUROMAP 2): 1,8 – 29,4 s Screw diameter: 40 mm Effective screw length (L/D): 17,5 Screw stroke (max): 150 mm Calculated stroke volume: 188 cm³ Shot weight (PS): 172 g Material throughput (PS): 24,5 kg/h Material throughput (PA6.6): 12,5 kg/h Kodpfx Ajxdl H Ismpslr Injection pressure (max): 1530 bar Holding pressure (max): 1530 bar Injection flow (max): 182 cm³/s Screw circumferential speed (max): 62 m/min Screw torque (max): 430 Nm Nozzle contact force | retraction stroke: 60 kN | 240 mm Heating capacity | zones: 7,7 kW | 5 zones

Condition: like new (used), Year of construction: 2020, functionality: fully functional, CUT 2530S - Variable CNC Machine Klodpjwfdm Esfx Amper EPS cutting machine with 4 independent moving axes and variable machine table.