Tractor

Case IH 745 XL

Condition: used, mileage: 1 km, power: 187 kW (254.25 HP), axle configuration: 4x4, gearing type: automatic, Year of construction: 2013, GVW: 44.400 kg Ksdpfx Aloy Iadrodsnb Please contact Emal Jaweed for more information

Condition: new, Year of construction: 2026, _____Standard Equipment / Technical Data Engine Rated Power (ISO) 68 / 90 kW / hp at 2200 rpm Max. Power 71 / 95 kW / hp at 2000 rpm Max. Torque 405 Nm at 1500 rpm Manufacturer / Type: Agco Power / AP 44MBTN-D5 Low-emission engine, 4 cylinders / 4.4l, 4V, STAGE 5 Controlled Turbocharger, SCR - Catalyst Knsdpfxezpcvde Aldob DOC - Diesel Oxidation Catalyst SCR Particulate Filter Catalyst Hood - single-piece, foldable Exhaust pipe on the right side in front of the cab Fuel tank capacity 198 liters / AdBlue 18 liters Transmission / PTO 16/16-speed Dyna-4, SpeedMatching, 40 km/h PowerControl operation on the left with load-sensing reversing gearbox, clutch operation, 4-stage load shifting with 1 lever, T-shuttle lever in the side console Partially automatic group shifting and Autotronic monitoring Permanently cooled wet disc clutches with independent lubrication system PTO: 540 / 540E / 1000, stub shaft 1 3/8", 6-spline Electrical engagement in the cab PTO START/STOP button on the rear, left fender Hydraulics / Lifting System Open Center system Quick coupler Cat. 2 Upper link control 4,300 daN maximum lifting force, 2 external lifting cylinders Adjustable lifting struts on both sides EHR with external control on both fenders Quick adjustable automatic drawbar coupling Electrical system Thermostart, 120 A alternator Power supply (12 Volt) for external devices with connector Axles / Additional Weights All-wheel drive front axle with switchable differential lock Rear axle ND with flange hub Oil-cooled disc brakes Front fender, width adjusted, rotatable Rear fender width 1.80 m, without extensions Front weight carrier with integrated drawbar and drawbar pin Driver's Seat Vibration-damped standard cab with standard roof, ventilation and heating Integrated safety frame with tinted glazing Doors on both sides with safety steps Steering column adjustable in height and inclination Air-suspended driver's seat with armrests, swivel adapter, safety belt Exterior & wide-angle mirrors Interior mirror Analog-digital instrument panel (SIS) Radio preparation with antenna and speakers 4 work lights front and rear on the cab roof 2 driving lights in the hood and on the handrails, 2 work lights on the rear fenders Special Equipment: Fuel tank protection PowerControl & Brake on Neutral (clutch effect) 100 l/min, Open Center hydraulic system oil flow coupling (58+42 l/min) Front loader quick coupling system Leak oil collector on quick couplers 3 control valves: 1x MR, dw, EA, SST + 1x dw, NL, SST + 1x dw, NL, SST + free return 2.5t front lift, 1 hydraulic line set, electrical socket MF front loader preparation: foundation set, hydraulic set, electrical control via joystick, PTO: 540/540E, flanged, 6-spline, internal engagement Rear fender extensions - 100mm Tires 480/70R38 & 380/70R28 Air conditioning Cab with mechanical suspension Telescopic exterior & wide-angle mirrors Passenger seat with belt Air-suspended driver's seat, automatic adjustment with safety belt, swivel adapter and armrests Rear window wiper / washer system Without MF Connect (MF Telemetry System)

Condition: reconditioned (used), Year of construction: 1998, Tool Grinder Make: Deckel Knedpfx Alsy Drkcsdeb Model: S0 Year of manufacture: 1998 – overhauled, newly painted RAL7035 light grey / RAL7012 basalt grey Machine no.: 26230 Warranty: 12 months single-shift from delivery. For machines located outside our North Bavarian sales area, travel costs are to be covered by the customer. Accessories: - Grinding wheel with flange - Operating manual Including new electrics On/Off switch in new enclosure with undervoltage release coil to provide restart prevention (e.g. in case of power failure or unplugging the machine) Sold as seen Technically, the machine corresponds to the state of the art at the time of its year of construction.

Condition: used, We are selling several used construction machines from our stock due to fleet restructuring. Available, among others: Kedpfx Aezv S Ehjldenb Kubota KX019-4 mini excavator Wacker Neuson EZ17 mini excavator Wacker Neuson DW30 wheeled dumper Thwaites 3-ton dumper Other machines available upon request The machines are located in 61250 Usingen and can be inspected by appointment. Some machines come with accessories such as deep-dig buckets and ditching buckets. Inspection by appointment in Usingen.

Condition: used, Year of construction: 2016, operating hours: 3,410 h, power: 190 kW (258.33 HP), next inspection (TÜV): 09/2028, Equipment: air conditioning, all wheel drive, Internal vehicle number: FG50320 Available immediately at our yard in Kaufungen. More information can be found at: * Golec Nutzfahrzeuge GmbH (German, English, Bulgarian, Russian) * Viktoria Sologubova (Polish, Russian, Ukrainian, English) Knodpfxsytlldj Aldsb Never registered. Financing example: * Internal number: Tractor * Purchase price: 72,000.00 € * Down payment: 10% * Term: 60 months * Monthly payment: 1,100.02 € Residual value: 14,380.00 € If you are interested in this offer or would like to customize it to your needs, please contact us (Mr. Enchev). We look forward to hearing from you. Errors and omissions excepted. We will gladly accept your used vehicle as a trade-in. Financing is available directly with us. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: excellent (used), Year of construction: 2017, ATLAS COPCO XATS138 COMPRESSOR, 7.00 m3, 2017 Mobile compressor, ATLAS COPCO XATS 138, fully serviced! Technical data: capacity: 5.00-7.00 m3/min; operating pressure: 7-10.3 bar; year of manufacture: 2017; engine: KUBOTA operating hours: 500 h !!!!!; compressor in full working order Below is a link to a video showing the machine in operation. Kedoid Iy Hopfx Aldonb ATLAS COPCO XATS138 COMPRESSOR, 7.00 m3, 2017. Tank capacity: 0 liters.

Condition: used, Year of construction: 2021, operating hours: 1,120 h, power: 53 kW (72.06 HP), Equipment: all wheel drive, front linkage, * German-made machine, first owner, in very good condition * TABMC040VK5115005 * Full service history * Road approval, 40 km/h * 4x4 all-wheel drive * Year of manufacture: 2021 * Operating weight: 6,200 kg * Tires: 340/85 R24 (front), 420/85 R34 (rear), approximately 80% tread * * I would be happy to send you a video via WhatsApp * WhatsApp: * Polish contact: [Phone number] Ksdpfxsy Ubgue Aldjnb * Sale only to businesses, no warranty, all information without guarantee, subject to prior sale.

Condition: used, Year of construction: 2024, New: Yes Colour: Red Working width: 180 cm Knsdpfxex I Dtdo Aldeb Operating depth: 700 mm

Condition: used, Year of construction: 1991, Type: WKF 50/12 N.SE Size: DN50 12 stages Standard version with mechanical seal Flow rate: 26.9 l/s (96.8 m³/h) Head: 380 m Speed: 2,960 rpm Kodpfx Asy A Rbdeldsnb

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 95 h, load capacity: 2,500 kg, lifting height: 5,850 mm, fuel type: diesel, mast type: telescopic, construction height: 1,960 mm, fork length: 1,200 mm, drive type: Diesel, Telescopic forklift, rigid ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Telescopic Condition: Like new Technical condition: Very good Front tire type: Pneumatic Rear tire type: Pneumatic Rear tire condition: 80 - 100 % Rear work lights, front work lights, heater, full cabin, CE certificate, safety light, exterior mirrors, joystick, windshield wiper, Ksdpfjzrcu Ejx Aldsnb