Sandblasting unit

CARLO BANFI

Condition: used, Year of construction: 2006, functionality: fully functional, air demand: 4,000 m³/h, pressure: 5 bar, operating pressure: 7 bar, inner dimension width: 900 mm, workpiece weight (max.): 1,000 kg, filter area: 120 m², input voltage: 380 V, working range: 1,400 mm, tank capacity: 960 l, suction capacity: 4,000 m³/h, Equipment: cabin, documentation/manual, Automatic hook-type shot blasting system complete with monorail overhead conveyor, abrasive recovery system, bucket elevator, pneumatic shot selector, vibrating screen, dust collection filter, and control panel. Main features: Maximum workpiece diameter: 900 mm Maximum workpiece height: 1,400 mm Maximum load weight: 1,000 kg No. 6 hook holders No. 4 Carlo Banfi X1 centrifugal turbines Turbine power: 4 x 7.5 kW Hnodpfx Ahozdqtms Ron Abrasive flow rate: 300 – 360 kg/min Abrasive capacity (initial charge): 960 kg Power supply: 380 V three-phase – 50 Hz Total installed power: approximately 22 kW Carlo Banfi PS-6B dust collection filter included: Air flow rate: 4,000 m³/h Filter area: 120 m² No. 6 microfibre filter cartridges 4 kW suction fan Automatic cartridge cleaning system with compressed air Required compressed air pressure: 5 – 7 bar System suitable for shot blasting and surface cleaning of castings, metal structures, mechanical components, stamped parts, and steel products. Machine complete with shot recovery and recycling system, electrical panel, and original technical documentation. Includes spare parts, including motors and parts for the blasting chamber. Video of the machine in operation available upon request. Another identical shot blasting machine is available.

Year of construction: 2018, condition: ready for operation (used), Components: control cabinets, machine body (cabin, turbines, outlet, inlet), platform with processing unit and bunker, sound insulation cabin, impact box, bucket elevator, gratings, ladder, pre-impact box, small parts, piping, cable ducts, blasting media and refill silo, compressed air connection: 1/2 inch at 4–6bar, compressed air consumption: approx. 1.5m³/h, processed according to DIN ISO 8573-1, solid particle size: 1µm, density: 1mg/m³, water content: pressure dew point 3°C, oil content: 1mg/m³, length: 11,000mm, height: 5907mm. An on-site inspection is possible. Hnedpfoxtprtsx Ah Rsn

Condition: good (used), Tumble rubber belt blast machine Max. batch volume: 140 L Max. batch weight: 300 kg Hnodpfx Ahjzbrfts Rjn Max. component weight: 10 kg Compartment diameter: 700 mm Compartment width: 850 mm Nr. Of turbines: 1 Power of turbine: 4 kW Max. turbine flow: 56 kg/min Cleaner type: air Foundation: no Housing protection: Mn + rubber Filtering unit: YES Max. installed power: app. 12 kW !!! NEW Rubber bel installed !!!

Year of construction: 2025, condition: new, ASK - 0 Hanger Type Shot Blasting Machine; It is used for polishing sheet and metal parts which have come out of press and heat treatment, cleaning and roughening of castings, preparation before paint and rubber coating, taking forging parts to canvases and revision of old parts. (Quantity x Diameter): Ø: 800 H: 700 has 2 turbine x Ø 325mm with 6 blades The cabin is made of ST-37 sheet metal and the hot pot area is supported by Brinell or Manganese wear plate. The interior of the cabinet is covered with a rubber sheet to prevent it from being exposed to abrasion due to the sandblasting process. Rubber sheets are fixed to the cabinet with moldings. (Coating with a complete manganese armor is optionally offered to our customers.) The wear plate cladding is screw-in design for future wear-based replacements. It can be easily changed by authorized personnel in your company. Although the cabin door can be pneumatic or manual, it is designed as a winged system and 2 pieces. The cabinet door has a lock system to prevent it from being opened during the blasting process. In addition, there is a sensor or switch on the cabinet that stops sandblasting when the door is open. Hnedpevkf Agsfx Ah Rjn The system consisting of rail line, suspension gear system and crane (optional) is designed to allow the material to be sanded to move easily inside the machine. Full automation panel is available. Panel materials are Siemens / Schineider brand. Machine control is provided with a 10” PLC screen.

Condition: used, Bending capacity: Ø45 mm Bending angle: 0 - 180° Revolver-adjustment: 8-fold adjustable angles Mandrellength: 4000 mm Sets of bendingdies: 1x Ø 16 mm 2x Ø 17 mm 3x Ø 20 mm Hsdpfx Ahoq Nipye Rsnn 2x Ø 27 mm 1x Ø 28 mm 2x Ø 30 mm Featured with: - 4 Mandrels - Mandrel retraction unit Country of origin: Germany Motor power: 3 kW Machine LxWxH: 400 x 100 x 120 cm Machine weight: 1500 kg

Year of construction: 1995, condition: ready for operation (used), A Gutmann blasting system completely overhauled by Rösler in 2019 is available. Documentation available. On-site inspection is possible. Hnjdpjwftcpofx Ah Ren

Year of construction: 2025, condition: new, Overhead Continuous Shot Blasting Machine? An overhead continuous shot blasting machine is an automatic surface cleaning system used mainly for removing rust, scale, paint, or other impurities from metal surfaces. In this system, the workpieces are suspended from an overhead conveyor line and pass continuously through a blasting chamber, ensuring high productivity and consistent quality. ⚙️ Working Principle Loading: The parts are hung on rotating hooks or hangers attached to an overhead conveyor line. Transportation: The conveyor automatically carries the parts into the blasting chamber. Blasting Process: Inside the chamber, high-speed turbines throw steel shots or abrasive media onto the surface of the parts. This removes rust, scale, burrs, and old paint layers, leaving a clean, roughened surface. Rotation of the Hanger: The hooks or hangers usually rotate to ensure that all surfaces of the part are evenly blasted. Discharge and Recovery: Hsdpfx Ahexuhf Is Ronn After blasting, the parts exit the chamber. The used abrasive is collected and recycled, while dust is filtered through an efficient dust collection system. CODE W: x H: Turbine ASK-KON - 1 1.000 x 1.000 4 x F400 ASK-KON - 2 1.000 x 1.500 6 x F400 ASK-KON - 3 1.000 x 2.000 8 x F400 ASK-KON - 4 1.500 x 3.000 12 x F400 ASK-KON - 5 1.500 x 4.000 12 x F500

Condition: refurbished (used), functionality: fully functional, We offer 4 pieces of Schlick turbines – 320 mm, including 7.5 kW motors. Turbines: Schlick ROTO-JET RB500 5.2/4/7.5. Turbine type – 5.2. Abrasive delivery – 140 kg/min. Abrasive outlet speed – 70 m/sec. Turbines after complete overhaul, fitted with original spare parts. Shot blasting, blasting wheel, sandblasting machine. PRICE PER PIECE – 3000 EUR. Hnjdjvphf Uopfx Ah Rsn

Condition: reconditioned (used), Year of construction: 2011, functionality: fully functional, We offer refurbished turbines from a continuous shot blasting machine - Rösler RRB 22/5-L. Turbine type - Hurricane H42. The turbines have been refurbished using original spare parts made of tool steel. Shot blasting machine, sandblaster, blasting turbine, shot blasting, sand blasting, throwing turbine. Hnjdpfx Aeyy Rybeh Ren

Condition: like new (used), Year of construction: 2017, operating hours: 1 h, functionality: fully functional, We offer refurbished turbines from a hanger-type shot blasting machine - Cogeim PG 10x15/2TR, year 2011. Shot blasting machine, sandblaster, blasting turbine, sand blasting, shot blasting. Hnodjy Nwq Sepfx Ah Rjn