Polyurethane processing machine

Cannon Afros A System 40 Penta Twin

Condition: refurbished (used), Year of construction: 2025, operating hours: 36 h, functionality: fully functional, machine/vehicle number: 1024-54, Country of Manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff: 8460.2920 Dimensions: 235 x 155 x 145 cm TECHNICAL FEATURES: MAIN DIMENSIONS: Centre height: 100 mm Distance between centres: 400 mm LONGITUDINAL SLIDE: Max travel: 420 mm Minimum automatic travel: 1 mm Table feed speed: 100–3500 mm/min Overtravel delay: 0–5 sec. Maximum table swivel (400/650 mm): 30°/15° CROSS SLIDE: Max travel: 170 mm Rapid traverse: 30 mm Plunge depth (diameter): 1.9 mm Feed rate 1: 0.03–1.5 mm/min Feed rate 2: 0.02–0.3 mm/min Plunge feed per impulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual stroke: 120 mm Swivel to right: 15°/30° Optional wheel guard for wheel set max width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds: 80/175/380/800 rpm Internal taper: Morse 4 Collet type: W-20 Drive power: 0.5 kW Maximum workpiece weight: 20 kg Load for in-the-air grinding: 12 Nm Optional stepless drive speed range I: 30–300 rpm Optional stepless drive speed range II: 120–1200 rpm TAILSTOCK: Iodpfx Agew T Sc No Ujal Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Generator straightness: Between centres: 400 mm Measured over 400 mm: 0.002 mm Between centres: 650 mm Measured over 650 mm: 0.003 mm Roundness accuracy for in-the-air grinding: 0.0004 mm CONNECTION VALUES: Power consumption: max. 8 kVA Permissible voltage variation: –15% / +10% Permissible frequency variation: ±3% Compressed air: 5 bar All technical specifications are given without obligation and subject to errors or omissions.

Condition: used, SANDWICH PANEL LINE FOR DOORS AND WALLS : 610mm width Made by METECO This sandwich panel production line is designed to manufacture doors & walls panels up to 610mm with an annual capacity of 1.500.000 m panel/year. MAIN PRODUCTION DATA Width: 500 - 610 mm Thickness: 40 - 80 mm Capacity: 1.500.000 m panel/year TECHNICAL SPECIFICATIONS Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz SCOPE OF SUPPLY 1. Upper sheet metal treatment section - 10 T upper unwinder with coil carriage - Pinch-Roll and roller passage - Upper reel steel frame - Polyethylene film applicator - Embossing machine for texture pattern - Press for decoration pattern - Profiling machine with upper rollers (12 stands) - Steel upper frame for profiling machine - Upper sheet guide 2. Lower sheet treatment section - Lower 10 T double unwinder with reel carriage - Polyethylene film applicator - Corona treatment machine - Embossing machine - Lower roller forming machine (12 stands) - Rollway - Operator desk for entry line 3. Panel forming section - Hot air preheating oven - Sheet guiding unit - Steel reinforcement machine - High-pressure foaming plant - Foaming portal - Foaming booth Iasdpjvtpciefx Ag Ujl - Side sealing system and tape applicator - Double press conveyor - Double belt heating system - Double belt press - Outfeed roller conveyor - Sawing machine for cutting - Soundproof cabin - Dust extraction unit - Operator Control desk 4. Stackable section - Automatic panel tilter - Stackable conveyor - Extraction conveyor - Packaging section - Styrofoam spacer feeding system - Infeed conveyor - Packaging machine - Extraction conveyor - Wrapping machine 5. Panel production equipment - Top roller forming tools - Bottom roll forming tools 6. List of additional machines - Container station for polyol, isocyanate and additives - Pentane tank and accessories Width: 500 - 610 mm Thickness: 40 - 80 mm Line speed: 12 m/min Maximum weight of reels that can be used: 10 Ton Coil outer diameter: Maximum 1400 mm Coil inner diameter: 508 mm Maximum sheet width: 610 mm Maximum thickness of producible panels: 80 mm Power supply: 400 V Frequency: 50 Hz Capacity: 1.500.000 m panel/year

Condition: good (used), Year of construction: 2007, functionality: fully functional, drilling depth: 1,150 mm, overall weight: 12,000 kg, drill diameter: 32 mm, Heidenhain iTNC530 cnc control 12-fold tool changer Ijdpewcldasfx Ag Ujal Technische Daten / technical details: Wege: / travels: X-Achse längs (Tisch) / X-axis longitudinal (table) 1800 mm Z-Achse quer (Ständer) / Z-axis cross (column) 1700 mm W-Achse quer (Bohreinheit) / W-axis cross (drilling unit) 1150 mm Y-Achse senkrecht (Bohreinheit) / Y-axis vertical (drilling unit) 1200 mm B-Achse (Rundtisch) / B-axis (rotary table) 360 ° A-Achse (Bohreinheit) / A-axis (drilling unit) -25 - +15 ° Bohrbereich-Tiefbohren (ELB): / drilling area-deep drilling (ELB): Durchmesserbereich / diameter range 6-32 mm max. mögliche Bohrtiefe / max. drilling depth 1150 mm Antriebsleistung / drive capacity 40 kW Gewicht der Maschine ca. / weight ca. 12000 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. For more technical details please look at the photos

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, laser source manufacturer: MAX, laser power: 6,000 W, warranty duration: 12 months, Equipment: CE marking, cooling unit, dust extraction, Brand new 4th generation laser cutting system SF3015H is designed for high laser power outputs up to 20KW. Our laser cutter is equipped with a MAX 5G 6KW laser source! Integrated control cabinet included. The system features an automatic pallet changer, which significantly reduces loading times. The machine bed is reinforced. The machine has an automatic smoke extraction system. Machine controls are in German. HANLI water chiller. Purchase ex-stock Büren, including setup and training, with a 1-year warranty. For further inquiries, please contact us directly! Iasdpfxjk R T Nms Ag Usl

Condition: good (used), Various heavy-duty roller conveyors as casting or cooling lines, ready for immediate use Ijdpod Tx Ahjfx Ag Ujal

Condition: excellent (used), Coating and packaging line with thermo-shrinkable film, consisting of: a) Double conveyor belt (mm 3000 x mm 1100) for application of corner protections. - Adjustable feeding speed from 3 to 15 m/min. b) Stretch wrapping machine Mod. Compact 250/6R with motorized conveyor belt Iajdpfxsgp Diae Ag Ujl - Total length of the machine (with motorised belt) mm 7600 approx. - Reel holder (6 upper reels max width mm 2450 + 6 lower reels max width mm 1450) - Slitter and transversal welding machine (mm 2500) - Max useful height mm 700 - Installed power KW 12 - With automatic device to pack light pieces (from 1 to 5 Kg) by welding bar c) Shrinking tunnel total length about 4700 mm (of which about 3700 mm are of the tunnel) with hot air circulation (heating by electric resistances and fan), total installed power KW ? - conveyor with metal rods (width mm 1500 approx.) - Max useful height mm 700 - Adjustable feed speed from 4 to 20 m/min d) Outlet roller conveyor "ELME" (idle rollers) for cooling (mm 3000 x 1500 ca.)

Condition: used, Year of construction: 2002, x-travel 3200 mm y-travel 800 mm z-travel 600 mm spindle taper SK40 Isdpfxjv S Irtj Ag Ueal turning speeds 50 - 12000 U/min no. of workpieces in the magazine 30 Stück table surface area 3900 x 750 mm rapid travel x/y/z 12/12/12 m/min total power requirement 29 kW weight of the machine ca. 15000 kg dimensions of the machine ca. 7200 x 3500 x 3100 mm CNC traveling column machining center Hedelius Equipment: - Chip conveyor - 30-position tool changer - Heidenhain CNC control iTNC 530i - High-pressure belt filter system - IKZ 15 bar - SK40 mounts - Operating instructions The following repairs were carried out in 07/2022: - X-axis guide carriage - Various pneumatic hoses - Safety glass on loading doors - Various push buttons with indicator lights - Door safety switches - X-axis cover (slats) - IKZ filters (4 pieces) - Filter cabinet - Z+Y-axis toothed belts - Door scrapers with dampers - Hose for external cooling, spindle cooling, and spray guns (2 guns) - Set of coolant nozzles for external cooling - 2x falcon bars for the Y-axis - 1x set of door rollers with rail (6 meters) - 1x Klüber grease with cone reamer

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 For further information, please contact us Isdpfx Aov Iamzeg Ueal

Condition: ready for operation (used), Year of construction: 2005, A Hennecke HK135 high-pressure polyurethane foaming system with four 25000l mixing tanks, a casting robot and two release agent robots is available. Capacity: 225t/24h, tool carriers: 42, mixing positions for additive mixing: 10, mixhead type: MQ, max. working pressure: 180bar, pressure tank: 330bar. Foam types: Rigid foam, rigid integral foam, semi-rigid integral foam, semi-rigid filling foam, cold-curing flexible foam, hot-curing flexible foam. Multiple mold foaming is possible. Complete documentation available. On-site inspection is possible. Ijdpfx Aettbd Njg Uoal

Condition: new, Year of construction: 2025, RETRACTABLE LIQUID SPRAY BOOTH Retractable spray booths are designed for manual painting application with side draft ventilation, for extraction of applied liquid paint overspray. The benefit of the retractable liquid spray booths is that saves space in the workshop. STRUCTURE It is manufactured from scissor system body, made of electro galvanized rectangular and circular tube structures and covered by PVC fabric material from outside. Moving system includes industrial wheels or rail & wheel system, recommended according to outdoor or indoor use and spray booth length. A curtain door is designed for closing the door during the painting application. VENTILATION SYSTEM Side draft ventilation provides high efficiency during painting application. The filter wall is manufactured modular from galvanized sheet metal, designed with shelves and emergency door at the two sides. Extraction fan is placed at the top of the filter wall, its electrical motor is placed out of the fan channel and there is no direct contact of the motor with the contaminated air in order to avoid the risk of spark. FILTRATION SYSTEM Extraction filter is used as 2 stages with 99,9% efficiency, placed at the side of the spray booth filter wall. There is a pre-filter at the door curtain that maintains natural airflow inlet during extraction fan is operating. Warning lamp at the control panel indicates service need when the filters get contaminated. Made in Türkiye Iaedpfx Agovxfkaj Usl CE Mark We offer the best technical solutions and competitive prices * Office in France and Germany, Contact us for more information and quotations