Hydraulic straightening machine for bar stock

Burckhardt Metall- und Glasbau GmbH Stretchmaster 6000

Condition: refurbished (used), SCHLATTER Welded wire mesh production line MG24 Full revamped Ncsdpfswu Tu Dsx Ad Ejn WORKING RANGE Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Adjustable by cutting device (0-1) Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24 WELDING MESH MACHINE MG 24.1/8C, Basic equipment including: - 1 Machine frame - 1 Upper support for press reception, continuously adjustable by hand crank - 1 Magnet supports with retaining magnets and weft wire monitoring. - 1 Row of pneumatic solenoid valves for press actuation. - 1 Installation for air and water. - 2 Pneumatic rotary drives with oil damping - Static motor torque with 5 bar compressed air: 480 Nm - Front continuously adjustable from: 25 - 250 mm adjustable by cutting device (0-1) - 1 Advance carriage with panel lifting device - 1 Set of tools for machine adjustment WELDING SECTION 8 Type C Transformers Rated power of each transformer: 100 kVA No-load secondary voltage: 7.1 V Rated secondary current: 14 kA 8 Thyristor contactors ES 130 12 Welding presses: 5.0 kN 12 Chain current bridge for spacing of warp wires: 50-100 mm 12 Chain current bridge for spacing of warp wires (for offset warp wires): 100 mm 10 Chain current bridge for spacing of warp wires: 100-150 mm 8 Chain current bridge for spacing of warp wires (for offset warp wires): 150 mm 6 Chain current bridge for spacing of warp wires: 150 - 200 mm 6 Chain current bridge for spacing of warp wires (for offset warp wires): 200 mm 24 Lower electrode holders Cu with standard angled electrodes and each with a water-cooled current cable, width: 58 mm 24 Wire clamping pliers Panel width: max. 2500 mm Weft wire length: min. 900 mm Weft wire length with QF5 dispenser: min. 300 - 1600 mm Spacing between extreme warp wires: max. 2400 mm Mesh length (warp wire length): max. 2500 - 6000 mm Spacing between warp wires: min. 100 mm Spacing between weft wires: 25-250 mm Warp wire diameter: 4.0 - 12.0 mm Weft wire diameter: 4.0 - 12.0 mm Number of warp wires: max. 24

Condition: good (used), functionality: fully functional, We offer for sale a complete line for multi-point automatic welding of SCHLATTER brand steel wires. We have three fully operational production lines. There are also automatic machines for the production of transverse wires (so called slitting machines with a cutter). Ncodpfxjtvpile Ad Een We also have a number of single point welding machines for steel wires.

Condition: used, functionality: fully functional, Year of construction: 2018, Sandwich panel line, roof 30, 50, 80, 100 mm, wall 50, 80 mm, facade 50, 100 mm Nsdpfxsxcinaj Ad Eecn

Condition: used, Year of construction: 2000, functionality: fully functional, machine/vehicle number: D08L/8034, Offer Number: D08L/8034 Machinetype: straightening and cutting machine Make: WAFIOS Type: R31 Constr. year: 2000 Ncjdpfx Aewi Th Tsd Esn wire diameter range: 1,5-7,0mm cutting length: 3000 mm speed - meters/min: 5-120 Location: In our warehouse

Condition: excellent (used), Year of construction: 1995, Combination Unit: Manufacturer: GSG Feeder: Type: 840.02-027 Crusher Descaler: Type: 663.02-017 Wire Range: Ø5.5-16mm For wire rod with approx. 40-60 daN/mm² strength Crushing and Bending Rollers: Carbide Inserts Adjustment with 0.37 kW - 1.15 A gear motor Brush Drive with 0.25 kW gear motor, n=293 rpm Connection Voltage: 380-420 V 50 Hz Dry Coating Unit: Type: BSG/T Filling: Calcium Stearate (e.g., Traxit Type: D S 51 E) Stearate Consumption: approx. 350 g per t of wire Drawing Speed: max. 15 m/s Electrical Power: 2x 0.55 kW gear motors Cassette: 2 slots (supplied with 1x roller block + 1x cassette) Type: PKG/T (TS) Cleaned rolled wire Wire strength approx. 40–60 daN/mm² Wire range max. inlet diameter 9.5mm, finished diameter 3.5–8.5mm Roll dimensions min. Ø115mm, max. Ø125mm, Bore diameter Ø82mm, width 15–25mm Cooling pin diameter 25mm Cooling water consumption approx. 600 l/h Drawing machine: Manufacturer: Koch Njdpfxor Nfvme Ad Eecn Type: KHZ 5000 Year of manufacture: 1993 Serial number: 13.821 Number of draws: 1 draw per block Drawing drum: Ø700mm Tensile force: mechanical 5000 N Wire material: mild steel wires Run-in strength: approx. 40 – 45 daN/mm² Maximum drawing range: Inlet diameter 5.0 – 8.5mm Cross-section reduction: 20 x 25% (mechanical gradation) Drawing speed: up to max. 7.0 m/s Brake: Twiflex, type: MRB Drive: AC motor/frequency converter, Siemens PN=110 kW, n=1485 rpm Spooler: Manufacturer: Koch Type: KHS 1250 Year of manufacture: 1993 Factory No.: 13741 Wire diameter: 5 – 8.5 mm Strength: approx. 55 – 70 daN/mm² Winding speed: V=7 m/s, adapted to the drawing machine Filling weight: approx. 3000 kg Spool drive motor: Three-phase motor with external fan Type: 1 PQ 6253 – 6 AA 70- Z A 15 + K 20 + C 14 + H 46 P=37 kW, n=1000-2000 rpm, IP54, design B3 Laying drive motor: 66-671U, 1.5 kW, 170 V, 9.8 A, 1680 rpm, IP 44, B5-200 With Attached tachometer generator TG 20, 20 V / 1000 rpm With attached spur gear SK 32, i=57.53, design B6 Hydraulics: Hydraulic excavator type: H13 AK Pneumatics: Twiflex disc brake type: MRB Pneumatic cylinder type: SPWG 28032-25mm stroke Dimensions: 3100 x 3000 x 1700 mm (L x W x H) without counterweight

Year of construction: 2009, condition: used, material width 320 mm material thickness 8 mm no. of straightening rolls 9 material cross-cut 2000 mm² Ncjdpfsp U Uwijx Ad Ejn weight of the machine ca. 4,2 t dimensions of the machine ca. 2000x2000x2400 mm

Condition: good (used), Year of construction: 1987, machine/vehicle number: 36, Offer 25011 Technical data approx.: - Load capacity 250 kg - Outreach 6.0 m - Hook height approx. approx. 5.0 m - Wall mounting flange height approx. approx. 820 mm - Flange width approx. approx. 400 mm - Hole pattern / hole spacing approx. 720 x 325 mm - Slew radius approx. approx. 180° Nodsxfirkjpfx Ad Eocn Hoist Brand: DEMAG Type: PK 2 L Serial no: 5710318 Year: 1986 Technical data: - Load capacity 250 kg - Lifting speed 14 m/min - Drive 400 V 0.7 kW - Chain hoist operated via pendant control - Jib arm slewing by hand - Total weight approx. 300 kg - Transport length approx. 6.5 m

Condition: used, Year of construction: 1980, functionality: fully functional, machine/vehicle number: D08L/7600, Offer Number: D08L/7600 Ncedpswi S N Nofx Ad Eon Machinetype: straightening and cutting machine Make: WAFIOS Type: RS40S Constr. year: 1980 diameter range: 4-10 mm cutting length: 3000 mm speed - meters/min: 130 Location: In our warehouse

Condition: used, Year of construction: 2002, Additional title: Slewing crane Maximum load: 2000 kg Reach: 4 m Height: 4,61 m Ncsdjxykvmjpfx Ad Een

Condition: used, functionality: fully functional, machine/vehicle number: D08E/8404, Offer Number: D08E/8404 Machinetype: straightening and cutting machine Info: overhauled Make: WAFIOS Type: R5 Constr. year: Ncjdpfx Adjxnykcs Ejn diameter range: 6-14 mm cutting length: 6000 mm speed - meters/min: 23 - 90 Location: Europe