Assembly drill

Blum Mini Press P

Condition: new, Year of construction: 2022, functionality: fully functional, Edgebanding machine Hebrock F5 equipped with a PLC control system. It features a maintenance-free, coated rapid-heating glue pot, with pre-set configuration for quick pot changeovers. - 10” touchscreen display - Maximum edge thickness: 3 mm Gedpswyu Rwjfx Ag Estt - Minimum workpiece length: 160 mm - Feed speed: 7 m/min - Ready for operation in approx. 3.5 min - Maximum power consumption: 7.4 kW - Electrical connection: 400V / 3-phase / 50Hz - Table height: 900 mm - Machine dimensions: 4300 x 1300 x 1400 mm - Approximate weight: 900 kg Options/Extras: • Whispercut pre-milling unit, workpiece height up to 50 mm • Combi cutter head • Corner rounding radius: R = 2 mm • Radius corner rounding: R = 2 mm • Quick change system for corner rounding motor • Multi-radius scraper R2/R1 • Release agent spraying unit • Cleaning agent spraying unit • Edge protection spraying unit • Nesting function for milling unit and radius profile scraper • Pneumatic 3-point adjustment • Multi-tool (R2/R1/chamfer) • Integrated LED workspace lighting

Condition: used, mileage: 167,000 km, power: 88 kW (119.65 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 10/2026, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, total length: 4,999 mm, total width: 1,956 mm, total height: 1,951 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), had accident, navigation system, soot filter, Special equipment: * Rear parking assistance * Wooden floor in the cargo area * Mobile office package 1 * Full wheel covers * Spare wheel with road tires * Trim in cargo/passenger area Additional equipment: * Driver's airbag * Traction control system (ASR) * Exterior mirrors electrically adjustable and heated * 85 Ah battery * On-board computer * Rev counter * Automatic headlight activation * Rear wing doors without glazing * Cabin filter: pollen filter * Body type: panel van * Fuel tank: 80 liters * Adjustable steering column (steering wheel) * Engine: 1.6 L - 88 kW dCi diesel * Rear fog lamp * Wheelbase: 3098 mm * Low emissions according to Euro 6 standard * Sliding door right side cargo/passenger area * Seat upholstery: fabric, Seats in driver's cabin: driver's seat comfort, 3-way adjustable * Daytime running lights * Lashing rings on the side walls and on floor of cargo area * Pre-installation for body electrics * Heat-insulating glazing * New tow bar * Note: Increased oil consumption (2 l / 1000 km), vehicle is drivable but needs repair, possibly turbo. Engine smokes slightly during cold start phase, then runs clean. If you are interested in this panel van, please contact Mr. Krey Monday to Friday from 9 am to 6 pm, otherwise please send me an email and I will get back to you promptly. I speak German, English spoken, on parle français. Godpfjww Sgdox Ag Ejtt Errors and omissions excepted.

Condition: excellent (used), Year of construction: 2009, machine/vehicle number: 248, (Fast and functional drilling of series of holes thanks to interchangeable drilling gear system 32 with continuation examples) (5-spindle horizontal drilling gear allows simultaneous drilling of hardware and wooden dowels) Year of manufacture: 2009 Machine number: 248 Maximum working pressure: 6bar Depth adjustment up to 550mm Vertical gear motor power: 1.6 kW Horizontal gear motor power: 0,75 Gtodpjt Ebibefx Ag Eot Voltage: 380 V, 3 phases Injection pressure at 6 bar: 296 kg Weight without horizontal drilling device: 95 kg Weight with horizontal drilling unit: 118 kg Diameter of connection for chip extraction: 100 mm Volumetric flow rate: 141 m3/h Air consumption: 1.2 liters / stroke Work table: 800 x 970 mm Recommended base cabinet height: 950 mm Additional equipment: Extension rulers

Year of construction: 2022, condition: new, angle: 0° - 90° max cutting length: 1370 mm Gsdpfx Agei Ezr Ns Ejtt

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: Godpfx Agep Ecdgs Eett -2 1.5 m long aluminum rulers (right and left) with two stoppers -5 quick-action chucks Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm

Condition: used, Engine power: 13.59 PS/HP (10.0 kW), year of manufacture: 2012, boom table: with degree grid index, format sliding table: 3200 mm, parallel stop: 1000 mm, tool compartment, spray device, stepless speed Godpfxovwl Ezj Ag Eett

Condition: used, Year of construction: 2019, Used machine Year of manufacture: 2019 Equipment and Technical Data: - For classic nesting processing with wear plate - Machine frame of welded construction with ground and hardened prism guides for the gantry, unit head, and consoles - Gantry-type traveling column Godjwka Upepfx Ag Eett - Helical rack and pinion drive in X and Y axes, ball screw in Z axis for precise positioning - Working dimensions: - Max. support area on nesting table: X = 3100 mm, Y = 1560 mm - Max. traverse paths: X = 4695 mm, Y = 2100 mm, Z = 293 mm - Max. clearance height over DYNESTIC table: Z = 100 mm from table top (without wear plate) - Maximum programmable speed Vector speed: 128 m/min X = 80 m/min, Y = 100 m/min, Z = 25 m/min - DYNESTIC table: - Fixed, continuous processing table with grid layout - Continuous grooves in X and Y directions - Groove spacing: 50 mm - Includes 25 meters of sealing cord for clamping the wear plate - Vacuum fields: Single-circuit vacuum system - Drilling unit 7877: - 19 spindles - Drive power: 1.7 kW - 13 vertical spindles: - Individually selectable - Arranged in U-shape - 5+4 in X direction, 4 in Y direction - 32 mm spacing - Max. drill diameter: 35 mm - Total drill length: 70 mm from screw-on end (depending on panel thickness) - Spindle stroke: 70 mm - Rotational direction: alternating clockwise/counterclockwise - Speed (max): 1000 - 4400 rpm, infinitely variable - Tool holder: M10 thread, 11 mm fit - Without tool, without holder - 6 horizontal spindles: - 2 double drill spindles in X direction - 1 double drill spindle in Y direction - Tool holder: M10 thread, 11 mm fit - Max. total drill length: 63 mm from screw-on end - Without tool, without holder - Milling unit 7842: - Power: 12.0 kW (S6) - Max. speed = 1000 - 24,000 rpm, infinitely variable - Max. power at 12,000 to 24,000 rpm - Air-cooled - With HSK-F 63 tool holder - With right-hand threaded nut (for right-hand rotating tools) - With collet chuck for HSK shank - Ceramic ball bearings (hybrid bearings) - Tool weight max. 6 kg (incl. holder) - Tools: milling and grinding tools max. Ø 160 mm - Safety enclosure according to CE standard - Side and rear safety fence - Vacuum pump: 500 m³/h, dry-running - Personnel safety ensured by light barriers in the front machine area - Hand-held control device for remote operation of the machine with the following functions: - Start/stop of the processing program - Control of processing cycle speed - Reset button - Manual feed/rapid traverse for all axes - EMERGENCY STOP - CAMPUS V7 CAD/CAM software 1x machine license consisting of: - CAMPUS NC-HOPS: - Graphic variant system with WOP and CAD/CAM features for creating part variants using macro technology - CAMPUS MT-Manager - CAMPUS Workcenter - CAMPUS DXF interface - Automatic central lubrication - Automatic lubrication at defined intervals - Additional sealing against dust via pressurization in each guide carriage

Condition: used, Year of construction: 2015, Used machine Year of manufacture: 2015 Condition: very well maintained; low operating hours Equipment and technical data: - With PLC control including touchscreen - With joint milling unit with DIA tool up to 2 mm milling depth (maximum joint thickness 1 mm for special materials such as multiplex) - With extendable workpiece support - With quick-heating glue pot with glue change device - With cross-cut saw - With combination milling cutter r = 2 mm with separate pneumatic adjustment - With corner copying unit r = 2 mm - With surface scraper - Maximum edge thickness: 2 mm - Minimum - maximum workpiece thickness: 10 - 40 mm - Minimum workpiece length: 180 mm - Feed speed: approx. 7 m/min - Ready for operation: approx. 3.5 min - Power consumption: approx. 7.4 kW - With undercarriage Gtsdpsx Enqhofx Ag Est - Extraction port: 1 x 140 mm Dimensions: approx. 4,200 x 1,300 x 1,400 mm Weight: approx. 750 kg Availability: approx. end of January 2026 Location: Hesse

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 1,060 kg, total height: 1,800 mm, total width: 1,830 mm, total length: 2,000 mm, feed length X-axis: 3,000 mm, feed length Y-axis: 800 mm, feed length Z-axis: 50 mm, spindle speed (max.): 3,200 rpm, workpiece weight (max.): 25 kg, power: 2.2 kW (2.99 HP), air demand: 750 m³/h, operating pressure: 6 bar, number of spindles: 12, empty load weight: 975 kg, warranty duration: 12 months, Easy programmamble through-feed boring machine with touch-easy-smart software, 3 controlled axis X,Y,Z, also performing grooving operations (optional) and working from above Vacuum panel feeding Machine manufactured according to EC standards STANDARD EQUIPMENT HEAD UNIT Independent spindles N.7 vertical N.1 double horizontal -spindle TH1 (X axis) for back/ forth drilling Manual SIDE-ALIGNER PANEL EDGE-READER for perfect panel joints Teleservice Software Gtjdpfx Ageu U Hgij Ejt Dust-collection nozzle Wokring table with GENTLE BRUSHES to avoid storage of dust and shavings. Working process can be in a cycle or back to the operator HARDWARE & SOFTWARE 12" touch-screen - NO TEXT System, patented by Maggi USB and Ethernet ports for file uploading, on-line assistance and system upgrades System based on Linux Kernel Up to 1.000 working programs storable Package: on a wooden pallet (2200x2050x160 mm - Kg 123)

Condition: used, Year of construction: 2004, functionality: fully functional, machine/vehicle number: AL1/003895, travel distance X-axis: 2,949 mm, travel distance Y-axis: 1,353 mm, input voltage: 400 V, Working area: 2500 x 1240 mm Z-axis travel length: 200 mm Passage height: 180 mm Drilling unit: Drill head with 10 + 4 spindles 6 individually selectable vertical spindles in X 4 individually selectable vertical spindles in Y 2 horizontal spindles in X (1+1) 2 horizontal spindles in Y (1+1) Spindle speed: 4,000 rpm Power: 2.2 kW Pitch: 32 mm Drill holder: M10 with 11 mm mounting face Extraction port: D=160 mm Milling spindle: Tool holder: HSK 63F Spindle speed: 1,500 – 24,000 rpm, stepless via inverter Motor power: 6.6 kW (9 HP from 12,000 rpm (S1)) Right/left rotation Ceramic bearings Prepared for automatic change of angle heads Grooving saw unit: Fixed in X-direction (longitudinal) Power: 2.2 kW (3 HP) Speed: 6,000 rpm Max. saw blade diameter: 160 mm Saw blade thickness: approx. 3.2–6 mm Saw blade bore: 30 mm Extraction port: D=200 mm Worktable: 4 supports, 900 mm, stepless manual adjustment in X 12 round vacuum pods, D=110 mm, stepless adjustment in Y (2 pods per support) Gtedpfexxik Hjx Ag Eet 2 stops in X (1x left / 1x right) 1 stop in Y per support (total 6) Additional right-side stop with roller track for extending X-axis to 3,230 mm (2 clampings) Retractable reference stops are CNC-controlled Pendulum operation (2 working zones) Further technical data: Total connected load max.: 16 kW Recommended fuse: 64 A Power supply: 400 V (50 Hz) Compressed air: 7 bar System pressure: 10 bar Compressed air consumption: 150 nl/min Central extraction port with flap control: D=250 or D=300 mm Extraction speed: 30 m/sec Air consumption: 3,400 m³/h Vacuum: 3,000 Pascal Machine weight: approx. 2,700 kg Required floor space: approx. 6,400 x 2,970 mm Loading dimensions: 4,400 x 2,200 x 2,500 mm