CNC turning and milling center

Biglia B.750-YS

Condition: good (used), Year of construction: 2013, Turning diameter 376mm, Nwjdpfx Aajxv Svmo Ejr turning length 760mm, bar capacity 76mm, Y axis -/+ 52.5mm, C axis 0.001 degrees on both spindles, 12 station turret, 22KW Motor, Main spindle 4000rpm, sub-spindle 4500rpm, 3 jaw chucks, swarf conveyor, tool setter, magazine barfeed unit.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, This multi-axis CNC lathe, CMZ TTL-66-66-T1Y-T2Y, was manufactured in 2021. It features a maximum bar capacity of 66 mm (both spindles), a turning diameter of up to 220 mm, and a main spindle power output of 35.5 kW. The machine is equipped with two high-performance spindles with a 66 mm bar passage, two turrets with 12/24 tool stations, driven tools with 14 kW and 12,000 rpm, and Y-axis capability on both the upper and lower turrets. It includes a 35-bar high-pressure coolant system, complete with a filtration system and an additional tank. For more information about this lathe, please refer to the attached brochure or contact us directly. Equipment includes: - LPS for left spindle - Reduction tube for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for left spindle - Hainbuch AXFIX 65 collet chuck (standard) 2703/0008 for right spindle - Tool presetting device - Side-mounted chip conveyor (standard version) - Upper tool turret (T1) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Lower tool turret (T2) high-pressure coolant pump with three programmable pressure levels (35, 15 & 6 bar), including 75µm filter - Coolant wash nozzle - TA/06000/10 8,000W coolant chiller unit - Machine status indicator light - Tool life management system - Tool load monitoring - Programmable automatic parts catcher (pneumatic) - The workpiece extractor is equipped with a pneumatic gripper for automatic opening and closing to retrieve finished parts - Pneumatic ejector for the sub-spindle with 100 mm adjustable stroke. End position detection via sensor - Coolant supply through right spindle - Interface for bar feeder (unimag) - Preparation for extraction unit, connection flange Ø100 The machine comes complete with a chip conveyor, coolant unit, and tool package. It is available for immediate inspection under power, and available at short notice. Single-shift operated. Further information available on request. Nsdpfsxmhdnsx Aa Eswr

Condition: used, Year of construction: 2014, CNC turning and milling center (9 axes) with Y-axis, B-axis, sub-spindle, and tool turret CNC control FANUC 31iTA with Manual Guide i Nedpfxjx Hy R Ne Aa Ejwr Swing diameter over bed: 750 mm Swing diameter over cross slide: 600 mm Collision-free turning diameter: 210 mm Max. turning diameter main spindle: 540 mm Max. turning length: 1,520 mm Main spindle left and right (sub-spindle) Chuck diameter: 210 mm Spindle bore: 76 mm Bar capacity: 66 mm Speed range up to: 5,000 rpm Max. torque: 318 Nm Turning/milling spindle (swivel head, B-axis) Speed range up to: 12,000 rpm Torque: 81 Nm Drive power: 18.5 kW Positioning: 0.001° Swivel range: 240° (+120°) Tool magazine ATC Number of magazine stations: 40 Tool holder: CAPTO C6 Lower turret Tool stations: 12 Drill holder diameter: 40 mm Tool shank cross-section: 25x25 mm Tool holder type: BMT 55P Motor drive power: 5.5 kW Tool speed: 5,000 rpm - Chip conveyor - Parts removal with conveyor belt - Tool measurement arm - Internal coolant supply through sub-spindle - Chuck cleaning - Air/water through turret - Knoll compact filter unit - Automatic workpiece measurement

Condition: used, Year of construction: 2020, DOOSAN LYNX 2100LYA Year: 2020 FANUC touch control Specification: Max spindle speed: 6000 rpm Max turning length: 510 mm Max bar diameter: 51 mm Max turning diameter: 300 mm Y-axis: 105 (±52.5) C-axis: 360° Turret: BMT45P 24 positions - Programmable tailstock - Tool probe - LNS chip conveyor Nwodpfx Aaox Id D Aj Esr - Driven tool holders: 4 pcs (2/2) - Standard tool holders: 6 pcs Operating hours: 3177 hours

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: G3169-0110, turning length: 530 mm, turning diameter: 420 mm, spindle speed (min.): 20 rpm, spindle speed (max.): 4,000 rpm, spindle bore: 65 mm, travel distance X-axis: 220 mm, travel distance Y-axis: 80 mm, travel distance Z-axis: 550 mm, overall weight: 4,700 kg, turning diameter over bed slide: 800 mm, HYUNDAI WIA L200SY CNC TURNING CENTER Year: 2012 | Fanuc 18i-TB CNC Control SN: G3169-0110 • 5-Axis CNC Turning Center – Hyundai WIA L200SY • Main Chuck: 8″ | Sub Spindle: 5″ • Live Tooling & Y-Axis + C-Axis indexing • Max Turning Diameter: approx. 419–420 mm / 16.5″ • Max Turning Length: approx. 520–530 mm / ~20.5–20.9″ • Swing Over Bed: approx. 800 mm / 31.5″ • X Travel: approx. 220 mm / 8.7″ Nwodpjx I A Hcofx Aa Eor • Z Travel: approx. 550 mm / 21.7″ • Y Travel: approx. 80 mm / 3.1″ • Max Spindle Speed: up to 4,000 rpm • Main Spindle Power: ~20 HP (~15 kW) • Sub Spindle Speed up to 6,000 rpm • C-Axis indexing: 0.001° possible • Tool Stations: approx. 12 • Coolant system and chip conveyor included • Approx. Dimensions: 120″ × 68″ × 80″ • Approx. Weight: ~10,500 lbs (~4,760 kg) NOTE: MACHINE WAS REMOVED FROM GOOD WORKING CONDITION 2 YEARS AGO. PLANNED TO PUT BACK IN SERVICE BUT SELLER WILL NO LONGER BE DOING MACHINING.

Condition: used, Year of construction: 2011, controller manufacturer: Fanuc, controller model: 31i-Model A, _____ Description: Year of manuf. : 2011 Control : Fanuc 31i-Model A Turning diam. : 255 mm Turning length : 640 mm In General: Year of manufacture:2011 Control system:Fanuc 31i Model A Turning diameter:255 mm Turning length:approx. 640 mm Bar capacity:52 mm Main spindle: Technology:Belt spindle Speed:5,000 rpm Power:15 kW Torque:115 Nm C-axis:0.001° Bar capacity:52 mm Chuck:Hainbuch Spanntop Sub spindle: Technology:Belt spindle Speed:5,000 rpm Power:7.5 kW Torque:86 Nm C-axis:0.001° Bar capacity:52 mm Chuck:Hainbuch Spanntop Tool carrier I (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:BMT Tool drive:6,000 rpm, 52 Nm X-axis:190 mm Y-axis:80 (+/- 40) mm Z-axis:300 mm Nodpexy Ubyefx Aa Eowr Tool carrier II (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:BMT Tool drive:6,000 rpm, 52 Nm X-axis:190 mm Y-axis:80 (+/- 40) mm Z-axis:635 mm Tool carrier III (X/Y/Z): Technology:Tool turret Number of stations:12 Tool holder:BMT Tool drive:6,000 rpm, 52 Nm X-axis:190 mm Y-axis:80 (+/- 40) mm Z-axis:500 mm Equipment: Chip disposal:Chip conveyor Coolant supply:Internal coolant unit Bar feeder:Irco Breuning SiMag 70.1 - 3000 Parts removal:Parts gripper + cycle belt Set-up operation:Electronic handwheel Chuck:2x Hainbuch Spanntop Tool holders:Various driven + static holders

Year of construction: 2023, condition: ready for operation (used), General Data Machine weight 7100 kg Measurements height 2120 mm Dimensions Machine Length 2542 mm Main Drive Number of axis 3 Spindle Speed 4000 RPM Spindle motor power 15 kW Movement X-Axis Movement 230 mm Z-Axis Movement 640 mm This 3-axis CMZ TA-20TY-640 horizontal turning machine was manufactured in 2023. It features a maximum cutting diameter of 460 mm, length of 640 mm, and a robust 15 kW spindle capable of 4000 rpm. Includes a Y-axis travel of +70/-50 mm, 15 driven tools with a speed up to 12,000 rpm, and a bar capacity of 66 mm. Consider the opportunity to buy this CMZ TA-20TY-640 horizontal turning machine. Contact us for more information about this machine. Nwedpfxjx H U Dwe Aa Esr Application Types Turning

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, turning length: 610 mm, turning diameter: 300 mm, travel distance X-axis: 215 mm, travel distance Y-axis: 110 mm, travel distance Z-axis: 680 mm, bar passage: 81 mm, C-axis + Y-axis 2+2 driven tools Nsdpfx Aox Hpnkja Eswr

Condition: used, Year of construction: 2014, control Fanuc i-Serie turning diameter 320 mm turning length 305 mm greates pass round over bed 510 mm swing diameter over slide rest 290 mm x-axis 175 mm Nwedpfx Ajx Ik Sysa Eer z-axis 330 mm turning speeds 6.000 U/min spindle bore 53,3 mm Number of tools 12 St. auto power on hours ca. 39.183 h spindle hours ca. 8.379 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Chip conveyor - Driven tools Accessories, tools shown, and clamping devices are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and specifications, as well as prior sale!

Condition: good (used), Year of construction: 2021, functionality: fully functional, Fanuc control, two turrets, dual Y-axes, spindle bore 66 mm, sub spindle, parts catcher with conveyor, short bar loader, tool measuring arm, Hainbuch chuck, immediately available. Nwsdpfox Ic Ndox Aa Eer