Bielomatik Laser Welding System K3633/023 K3633 023 (plastic components)

Bielomatik Laser Schweißanlage

Bielomatik

Type: K3633/023

Bielomatik Laser Welding System

Machine Description:

The laser unit with integrated cooling for the laser is located in the lower left part of the machine frame.
The tools are mounted on a 2-station rotary table, which rotates 180 degrees with each cycle.
In the middle part of the machine frame is the working area with the welding station, the tool (on the rotary table), and the clamping system for the product.
The control cabinet is installed at the rear.
The welding station is protected against the loading/unloading area by a laser-proof enclosure.
The welding laser (the laser power supply) is switched off when a maintenance door is opened.
The loading and unloading of the welding parts is done manually. The welding process runs automatically.

Laser Type: YLR-300-AC-Y11/IPG

The cell was used for laser welding of various plastic parts (front frames).
For components with dimensions of approximately 460 x 280 mm.

Basic Data

Machine Equipment:

1 complete machine frame with enclosure, substructure, and safety devices, painted.
Adjustable machine feet, designed for transport with a forklift.
3 manual maintenance doors in the laser-safe processing area, each secured with a safety door switch with interlock.
4 manual maintenance doors below the machine table.
The control cabinet is firmly mounted on the back of the machine. Laser system from IPG.
1 fiber laser 300W cw, at the fiber optic end, 1070nm - completely air-cooled.
1 power supply for laser unit, pilot beam laser, and fiber optic cable.
1 Vario-Scan for 3D welding contour
1 Scanner - 20 aperture
Optics, F-Theta lens, focal length determines the processing field and processing distance
2x base tool, tool coding with transponder
Clamping system for holding a mask with absolute encoder
with pneumatic clamping system for controlled pressing of each welding part
Pneumatic air shower for protection of the lens housing Microbox PC427B incl. RTX (Siemens)
Pre-installed software - Siemens S7 PLC
Profibus, Profinet, Ethernet, RS232 interface
Touch panel 15” for operation and data/parameter input, machine lighting
Connection flange for on-site extraction

Machine Data:

Dimensions:

Machine W x D x H: approx. 2330 x 2350 x 2500mm

Control cabinet:

Firmly screwed onto the machine frame.

Area requirement: 5400 x 5400mm

Technical Data:

Power supply:

Number of phases/rated voltage 3x400V 50Hz
Connected load 5KVA
Hsdpfxszgaazo Ap Eefn
Fuse: 16A

Exhaust:

Nominal diameter ∅160
Air volume 500-1000 m³/h
Weight approx. 2000 kg

Condition: used

(Changes and errors in technical data are subject to change!)

We will gladly answer any further questions you may have by telephone.

The listing was translated automatically. Translation errors are possible.