Band Saw - Automatic - Horizontal
BERG & SCHMID GBS 255 Super VA-I MPS

Name: BERG & SCHMID GBS 255 Super VA-I MPS
Brand: BERG & SCHMID
Availability: InStock

Condition

New

Location

Germany

Band Saw - Automatic - Horizontal BERG & SCHMID GBS 255 Super VA-I MPS

Show map

Machine data

Machine type:: Band Saw - Automatic - Horizontal

Manufacturer:: BERG & SCHMID

Model:: GBS 255 Super VA-I MPS

Condition:: new

Price & Location

Location:: Deutschland

Call

Details about the offer

Listing ID:: A4005270

Reference number:: 1108-66217

Update:: 16.08.2024

Description

capacity 90 degrees: round 255 mm
capacity 90 degrees: square 240 mm
300 x 180
saw band length 2.765 x 27 x 0,9 mm mm
table height 870 mm
band speed 18 - 110 m/min
total power requirement 1,5/1,8 kW
weight of the machine ca. 0,63 t
dimensions of the machine ca. 1,8 x 1,85 x 1,85 m

Miter band saw, fully automatic GBS 250 Super VA-I MPS
Miter left. 45° automatic operation
Miter left. 60° semi-automatic operation
(cuts without programming)
Shockproof and ergonomic control panel
with oil-proof EPDM cover a.
Material height sensor c.
(Automatic cut start detection)
Frame and gearbox made from one piece,
very quiet cutting and very low vibration
Chip tray can be removed (disinfection)
Easy access to the saw, material and feed unit
Foldable safety cover
Fine feed adjustment
Semi-automatic. Cut!

Saw automatically with microprocessor control
Adjustable for 2 program levels
Semi-automatic operation
Fully automatic operation
Start after entering the desired number and length: material cut-
Cutting execution and piece counting until the program is fulfilled
MPS control for entering the desired number of feeds
All important machine data is shown on the LED display during the
Cutting process displayed (power consumption, cutting time, number of pieces)
The entered data is in RAM memory
The autodiagnostic circuit automatically shows all irregularities
as an error message and checks the entire process
Kodpod Iip Asfx Aa Eofa
Feed unit mounted floating.
Length adjustment via handwheel and vernier with mechanical position
indicator.
Adjustable for section lengths from 2.5 mm to 420 mm or through
Automatic reversing can be repeated 1 - 29 times, remaining piece length 210
mm

Seller

Registered since: 2003

795 listings online

Call

Send inquiry

Telephone & Fax

+49 2863 ... show

Fax:

These listings may also fit your interest.

Listing

Mitre saw UK-600/800 MTI-Maschinenbau UK-600/800

Cochem-Brauheck

1,118 km

Mitre saw UK-600/800
MTI-MaschinenbauUK-600/800

Call

Year of construction: 2018, condition: as good as new (ex-display), Miter saw with a saw blade diameter of 600mm (optional 800mm) - manual miter adjustment - Pneumatic table clamping - Pneumatic workpiece clamping (height and inclination angle of the clamping cylinders infinitely adjustable) - Two-handed safety control Optionally available: - Automatic miter adjustment - Roller conveyor with length stop or positioning system - Design as a sawing machine - Preload magazine - Horizontal clamping device - Suction system - Other accessories on request Keded Rhzwspfx Aa Eofa We will be happy to make you an offer tailored to your requirements. The machine can be inspected and tested in 56812.

See details

Listing

Brașov

2,564 km

Fiber Laser cutting machine
Bodor A-T

Call

Condition: new, Year of construction: 2025, Working Area: 6100mm*1524mm/4000mm*1524mm/3048mm*1524mm Laser Output Power: 3000W/2000W/1500W/1000W Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Max. linkage speed: 91m/min Max. acceleration: 1G 1. Stretched Aluminum Beam Aviation-level material with enhanced rigidity, greatly reduces beam deformation during high-speed operation, and improves high-speed directional sensitivity and processing efficiency. 2. Tenon-and-mortise Type Plate Welding Structure Bed Use Chinese traditional Tenon-and-mortise structure to provide stronger bearing capacity. Solder joint fixing and structural bearing ensure long-standing operation stability. Welded structure improves shock absorption effect, lowering deviation caused by shock, and offering more accurate cutting. 3. Double Automatic Centering Electric Chucks Double electric chucks with automatic centering function are easy to operate and require little maintenance. Brand new motor gives accurate control. Modular chuck components are independently developed and can be quickly replaced. Kfedpfx Aeg Eglpea Esa 4. Automatic focusing function of laser head By setting perforation focal length and cutting focal length respectively, the cutting is more accurate. Suitable for multiple focal lengths, and focal position will be automatically adjusted based on thickness of different sheets. 5. Low Gas Pressure Alarm Function Real-time gas pressure detection and abnormal information report ensure cutting quality and precision, and remind operators to replace gas in time.

See details

Listing

Tangential grinding jakobsen 1432 Jakobsen 1432

Balaguer

1,461 km

Tangential grinding jakobsen 1432
Jakobsen1432

Call

Year of construction: 1990, condition: reconditioned (used), tangential grinding machine Brand: Jakobsen Model: 1432 Year: 1990 rpm: 1400 Grinding area: 800x400mm Table size: 1000x350mm Maximum load on table: 400kg Maximum piece height: 475mm Grinding wheel size: 350x50x127mm Heidenhain ND 221B height indicator. Magnet table 800x350mm electronic Selter with magnetization regulator. Maximum distance between table and grinding wheel: 650mm Ksdjiv S Avspfx Aa Ejfa MONNET brand filter of the year 2007 Includes sets of wheels (See photos).

See details

Listing

Fully automatic band saw machine Macc SPECIAL 390 A

Bopfingen

1,391 km

Fully automatic band saw machine
MaccSPECIAL 390 A

Call

Condition: new, Year of construction: 2023, Highly efficient series production Clamp – enter the cutting dimension – start. Automatic saws with loading are a standard of rational series processing of bar and bundle material. Cutting area max. up to 290 x 320 mm. Furnishing Automatic hydraulic sawing machine with NC control for cutting from 0° to 60° right, complying with all CE safety standards The device has 9 programs, each of which composed of 99 individual steps, with a total number Kodpfx Aefww Sqsa Eofa of approx. 890 cutting positions, with corresponding piece counter Function: material feed closing fixed vice Blade rotation, distribution of emulsifiable liquid, temple lowering until the end of the cut and return of the feed carriage until specified amount bail return and stop the blade rotation by cooling liquid distribution cycle repetition Hydraulic feed cut by cut with no length limit Numerical control of quantity and length of cut Hydraulic control center with cutting pressure adjustment The saw blade is tensioned electro-mechanically by means of Microswitch monitored. Device with brush for belt cleaning Bimetallic strip 3200 x 27 x 0.9 mm Section thickness 1.2 mm Material feed stroke 600 mm Motor hydraulic center 0.75 kW Electric pump 0.09 kW to cool the belt It is always possible for you to inspect the desired system in our production/demonstration hall. Please do not hesitate to contact us.

See details

Listing

Bandsaw - Horizontal BERG & SCHMID DGS 350/450 HA-I Easy 34

Germany

1,293 km

Bandsaw - Horizontal
BERG & SCHMIDDGS 350/450 HA-I Easy 34

Call

Condition: new, capacity 90 degrees: round 350 mm capacity 90 degrees: square 330 mm 450x320 Kedpfxsfgyicj Aa Eefa saw band length 4250x34x1,1 mm band speed 40 + 80 m/min table height 845 mm saw band width 34 mm total power requirement 2,2 kW weight of the machine ca. 0,985 t dimensions of the machine ca. 1,4 x 2,0 x 2,2 m Double miter band saw, hydraulic semi-automatic, DGS 350/450 HA-I · miter left + right 60° without machine conversion · 34 mm saw blade width · Large material support turntable, ball bearings · To position the saw blade guides using a very wide linear guide · Strong, robust transmission · Large chipboards · Infeed and outfeed roller Removable chip tray (disinfection) · Free-standing control panel, safe and ergonomic · Storage space for tapes, consumables · Cutting pressure regulator Feed regulator · Fully hydraulic vise Preload super fast (front loading) · Material height sensor (automatic cut start detection) Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise Optimum, material-independent cutting result through fine adjustment of the saw frame by means of: *Pressure Control Valve (Cutting Pressure Force) *Feed Control Valve (Speed) *Switch with pictogram, easy and clear to use

See details

Listing

Cold Circular Sawing - Automatic BERG & SCHMID VKS 370 VA CNC

Velen

1,037 km

Cold Circular Sawing - Automatic
BERG & SCHMIDVKS 370 VA CNC

Call

Condition: new, saw blade diameter 370 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 100 mm 180x100 mm Working height 925 mm saw blade turning speeds 17 - 70 U/min total power requirement 3,0 kW weight of the machine ca. t dimensions of the machine ca. 1,9 x 1,45 x 2,1 m SPECIAL PRICE!!! High-performance vertical circular saw Hydropneumatic fully automatic. (20195) · miter left 60° + right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm drive with large Transmission ratio, integrated in a stable cast housing for Achieving optimal cutting results · Vice with double clamping arm for low-burr cuts Lateral quick shift when changing the miter · Precision prism guide of the gear head, laterally adjustable · Particularly stable base frame with built-in automatic cooling system · Large chip drawer · Chip removal brush in the saw blade protective hood CNC control: Kfsdsd Iin Ejpfx Aa Eoa · With button for over 90 different sawing programs with 99 sub-programs for length, quantity and angle · Automatic feed unit 2,000 mm via ball screw Incremental feed with automatic length compensation. Adjustable for cutting lengths from 25 - 9,999 mm. · Fully hydraulic control of saw frame and clamping devices · Pre-selection of 3 different material feed speeds · Visualization of the entire workflow with simple data entry ATTENTION: Price is without saw blade!!! (saw blade price EUR 204)

See details

Listing

Vertical machining center DMG MORI Eco Mill 600 V

Schweiz

1,381 km

Vertical machining center
DMG MORIEco Mill 600 V

Call

Listing

Folding Machine - SBS E 2540/1,5 Knuth SBS E 2540/1,5

Wasbek

1,194 km

Folding Machine - SBS E 2540/1,5
KnuthSBS E 2540/1,5

Call

Condition: new, The SBS E 2540/1,5, a manual folding machine from KNUTH, is a robust and reliable option within the Folding Machines category, specifically designed for the Manual Folding Machines group. With a working length of 2,540 mm and the capacity to bend metal sheets up to 1.5 mm thick, this machine excels in precision bending for long sheets, making it ideal for producing small series thanks to its adjustable angle stop. Its heavy-duty construction ensures durability, while the segmented upper tool allows for increased bending options. Additionally, the SBS E-series machines feature a manually adjustable rear gauge as an optional enhancement to further streamline operations. Whether you are considering installation, safety features, or the right accessories for your projects, the SBS E 2540/1,5 stands out in sheet metal processing. To enhance your workshop capabilities, request a quote now! Kfsdpfx Aaju E Infe Esa

See details

Listing

Contamine-sur-Arve

1,321 km

Swiss-type cnc lathe
TORNOSDT 26

Call

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 25.4 [mm] - Max. machining length : 195 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 25.4 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 8.2 [kW] - C axis indexing precision : 0.001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 9 - Number of motorized positions : 4 - Live tools speed : 5000 [rpm] GUIDE BUSH HOLDER 2 - Number of positions : 8 SECONDARY OPERATION - Number of positions : 8 - Number of motorized positions : 4 - Live tools speed : 7500 [rpm] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 2.912 x 1.300 [mm] - Machine height : 1.720 [mm] - Machine weight : 2.400 [kg] MACHINE HOURS - Number of hours under power : 44140 [h] - Number of working hours : 28118 [h] - Number of spindle hours : 15281 [h] EQUIPMENT - CNC : Fanuc 31i-B - 3 colors status lamp - Rotating tool motor on : S11, S51 - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Chips conveyor - Coolant tank : KNOLL KF 200/1200 * with high-pressure pump Kjdeuha U Hopfx Aa Esfa - Bar loader : Tornos Robobar SBF 326 - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer.

See details

Listing

Coordinate measuring machine Carl Zeiss Prismo 12/24/10 VAST GOLD mit RT

Weilheim an der Teck

1,350 km

Coordinate measuring machine
Carl ZeissPrismo 12/24/10 VAST GOLD mit RT

Call

Condition: refurbished (used), Year of construction: 2001, measuring range X-axis: 1,200 mm, measuring range Y-axis: 2,400 mm, measuring range Z-axis: 1,000 mm, Zeiss Prismo 10 VAST GOLD with rotary table Year of manufacture: 2001 Complete retrofit: 2025 Measuring range: X = 1200 mm, Y = 2400 mm, Z = 1000 mm Device features, equipment: C99 controller with BP26_SE control panel VAST GOLD sensor system Probe change magazine Probe change disk Probe accessories Automatic temperature compensation Calibration sphere HP Workstation Z4 with 27" monitor Calypso software Kjdpormkuksfx Aa Eofa Options: as requested Additional accessories Further options possible

See details

Advertise here