Bandsaw - Horizontal

BERG & SCHMID GBS 250 Super HA -I Easy

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 950 mm band speed 18 - 110 m/min total power requirement 1,5 kW weight of the machine ca. 0,42 t dimensions of the machine ca. 1,23 x 1,7 x 1,75 m SPECIAL PRICE!!! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) Rcodsfgyh Ujpfx Aa Esk • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3. Rapid lowering to the start of the material or the same for series cutting cut 4. Saw band off 5. Raise the frame to just above the material 6. Open the vise

Condition: new, NEW No.1 available for immediate delivery CE Warranty The MACC SPECIAL 335 MS is a semi-automatic band saw for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. The robust structure gives the machine the necessary rigidity and precision to the cutting group. The belt drive is equipped with a two-speed motor and a special reducer complete with bronze gear with hardened and ground worm screw. The flywheels are suitably sized and the belt guides are sturdy and made with watertight bearings and adjustable carbide plates. By means of the electromechanical microswitch control it is possible to tension the band with the rotation of the blade. Equipped with an accident-prevention safety device on the flywheel cover and on the blade, the machine is completed by a rotating table for resting the material and a vice with a rapid approach device. Operation. The machine: 1. closes the vice and activates the band motor 2. makes the arc descend for cutting 3. the arc returns to the starting position 4. stops the band motor 5. opens the vice Manual cutting possibility Cutting speed (m/min) 38-77 Cutting thickness (mm) 1,2 Cutting range From 45 sx 60 dx Stop for cuts of the same size Adjustable Electric pump for cooling the band 0,06 kW Cutting capacity at 0°. Rcsdpog S Ui Asfx Aa Eok

Condition: new, Year of construction: 2025, CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Machine characteristics Rodpfei D Dgwex Aa Eeck CORMAK HBS320 band saw for metal provides cutting at any angle from -45° to + 60°. The element cut can be fed manually or by any feeding device. The feed during cutting is gravitational on the principle of oil flow in a two-chamber hydraulic cylinder. Band saw perfect for cutting tubes, profiles and other materials. Operator starts the machine by pressing the START button and sets cutting speed. After the cycle is finished the machine automatically stops and the operator lifts the arm to the starting position. The band saw arm is made of massive, uniform cast iron, and together with 27 mm wide cutting band enables high quantity cutting of structural steel, stainless steel and tools. The vice is located in an adjustable bed and equipped with a quick clamp. Blade guides are equipped with a ball bearings system and cemented carbides, ensuring excellent cutting precision and straight cut. It has a huge impact on the band guiding, its durability, accuracy and cutting quality. The carbide guiding drastically reduces the wear of both the machine and the blade. The base is enclosed, constituting a rigid welded body of steel sheets. A separate flood coolant container with an electropump is inside. The shape of the base upper part constitutes a tank for flood coolant draining and chips produced during cutting. Cast iron workbench is attached to the base, with a double-sided swivel arm and a control panel. The feed speed is controlled by the control panel. There are 2 cutting band speeds: 44 and 88 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Ø max 260 mm /perpendicular cutting H×B max 320×160 mm /perpendicular cutting Power supply - 3–phase, 400V Total power - 1,5 kW Arm lowering control - hydraulic cylinder Band dimensions - 2740×27×0.9 mm Band speed - 44 / 88 m/min Vice base height - 920 mm Dimensions - 1400×880×1550 mm Weight - 280 kg Cutting parameters Angle 0º ---- ø260 320×160 255×255 45º R ø210 210×200 210×210 60º R ø135 135×130 130×130 45º L ø160 220×130 160×160 The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Migatronic MTE 440 TIG AC / DC welder for steel and alumminium. Water cooling Migatronic CTU 3000. The maximum welding strength is 440 A. Tested by EWM service. You are welcome to visit for inspection. You will receive a proper invoice. Rodpsh Ib Idofx Aa Eeck For foreign customers can also be a net invoice. Prerequisite is a valid Ust.Indent.Nr. Subject to prior sale. If you have any questions you can contact us by phone. Company names and trademarks are the property of their owners and serve only to identify and describe the products. Deviations from technical data and errors in the description of the article can happen and remain reserved. Shipping is exclusively to traders - for private consumers only a pickup is possible.

Condition: new, capacity 90 degrees: round 305 mm capacity 90 degrees: square 260 mm 350 x 200 saw band length 3375 x 27 x 0,9 mm band speed 37 + 74 m/min table height 940 mm total power requirement 1,5/1,8 kW weight of the machine ca. 0,61 t dimensions of the machine ca. 1,5 x 1,75 x 1,9 m Rcodpjfd Abaofx Aa Esk Double miter metal band saw with AutoCut function - Miter cuts up to 60° left and 45° right - Ball bearing turntable - Vice can be moved sideways - Massive, large material support - Automatic cooling Figure is semi-automatic.

Condition: excellent (used), grinding wheel (ØxWxd): 125 x 20 x 20 mm Speed: 2800 rpm longitudinal adjustment: 130 mm cross adjustment: 80 mm height adjustment: 65 mm Rcsdpfofqicxex Aa Eek rake angle: +25° to -10 Dimensions WxDxH: approx. 550 450 450 x 650 mm Weight: approx. 70 kg

Condition: new, The bSander 75.200 & 150.200 are machine sanders for sanding pipe faces and profile ends, for edge sanding and for face sanding on the upper surface of the system. bSander 150.200: Belt dimensions 150 x 2000 mm Belt speed 29 m/s. Rcjdpfxed Dp Aao Aa Ejk Drive power 4.0 kW//3x400 V//50Hz Dimensions L x W x H 700 x 530 x 1130 mm Weight 90 kg bSander 75.200: Belt dimensions 2000 x 75 mm Belt speed 29 m/s Drive power 3.0 kW//3x400 V//50 Hz Dimensions L x W x H 700 x 490 x 1130 Weight 72 kg Price on request

Condition: used, mileage: 247,575 km, power: 77 kW (104.69 HP), first registration: 11/2016, fuel type: diesel, empty load weight: 2,248 kg, maximum load weight: 551 kg, overall weight: 2,799 kg, next inspection (TÜV): 01/2025, fuel: diesel, CO₂ emissions: 172 g/km, fuel consumption (urban): 7.3 l/100km, fuel consumption (extra-urban): 6.1 l/100km, fuel consumption (combined): 6.5 l/100km, color: white, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 5,120 mm, Year of construction: 2016, construction height: 1,980 mm, Equipment: ABS, air conditioning, airbag, central locking, cruise control, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, trailer coupling, AdBlue system malfunction. The Ford Transit Custom 290 2.0 TDCi is a reliable used car, ideal for business people. It was first registered in November 2016 and has a mileage of 247,575 km. With a powerful 2.0-liter diesel engine and an output of 77 kW (105 hp), it offers efficient performance and meets the Euro 5 emissions standard. The vehicle is equipped with a manual transmission and has an average consumption of 6.5 l/100 km. The panel van model is characterized by practical equipment features, including air conditioning, cruise control, trailer hitch (AHK) and workshop fittings. Driver and passenger airbags as well as modern assistance systems such as the hill start assist ensure safety. Additional features such as an on-board computer, parking pilot system front and rear, and adjustable steering column increase driving comfort. The rear wing doors with a 180 degree opening angle and a sliding door allow for flexible loading options. The vehicle is in good condition, but the AdBlue system has a fault. The loading volume is optimized by a high partition. Other highlights include the medium-high roof variant, tinted glazing and an extensive interior filter. The dimensions are 5,120 mm in length, 2,032 mm in width and 1,982 mm in height. With a green environmental sticker, the Transit can be used in many environmental zones. Special equipment: Airbag on passenger side, vehicle without vinyl floor covering in the loading/passenger compartment, rear wing doors with glazing (opening angle 180 degrees), tailgate without glazing, high loading compartment partition behind driver and passenger, with window and through-loading option below, parking pilot system front and rear, visibility package 1 Other equipment: Airbag on driver side, traction control (ASR), basic, indicator light integrated in exterior mirror, on-board computer, electric brake force distribution (EBD), driver assistance system: hill start assist, interior filter: pollen filter, body/structure: high-space box, body variant: medium-high roof, steering column (steering wheel) adjustable in height/length, truck registration, engine 2.0 liter - 77 kW TDCi KAT, radio preparation, 4 speakers, wheelbase 2933 mm, spare wheel in driving tires, low emissions according to Euro 6 emission standard, headlights H4, sliding door in the loading/passenger compartment on the right, mud flaps at the front and rear, side protection strips, bumpers partially painted, tinted glazing, paneling in the loading/FG compartment: half-high, lashing rails on the side of the loading compartment Equipment was determined using a VIN query, errors can occur here for technical reasons Rodpotyz D Nsfx Aa Eeck COC is available Only sold to tradespeople (agriculture, freelancers, small and large businesses) or export. Errors and prior sale reserved.

Year of construction: 1968, condition: good (used), machine/vehicle number: 12314, Offer 22326 Technical data: - Drilling capacity in steel ST 60 35 mm - drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - drilling spindle stroke 170 mm - throat 345 mm - rotary table with 2 T-slots 550 mm - max. distance table - drilling spindle 650 mm - max. distance base plate - drilling spindle 1000 mm - feeds 0,09 - 0,16 - 0,28 mm/rev. - AZ gearbox stepless with gearbox - drilling spindle speeds infinitely variable 40 - 720 rpm - right. - counterclockwise rotation - drive 400 V / 2,5 kW - illumination - coolant equipment - Space requirement approx. W 750 x H 1950 x D 1000 mm - Weight approx. 700 kg Rjdpjkt Nqqofx Aa Eeck

Condition: good (used), We sell a used robot grinding machine. The plant is in good used condition. Included in the plant are: - 1x KUKA KR30-3 industrial robot - 3x belt grinders - 1x loading table Rcjdpfx Aoh T Duroa Ejk If you have any questions, please do not hesitate to contact us!