Lathe - cycle controled

Böhringer DUC 560

Year of construction: 1993, condition: good (used), CNC lathe cycles Fabr.VDF BOEHRINGER type: DUC 560 BJ. 1993 Kjdpfsd Ewaaex Aalsww with SIEMENS SINUMERIK 805T control. Turning length: 1000 mm Turning diameter over plan support: 365 mm Turning diameter above bed: 570 mm Spindle speeds: 3-2500U/min spindle motor: 19KW Spindle bore: 62 mm Chuck diameter: 315 mm Forkardt Turret head with 8 POS. VDI 30 With accessories and equipment documentation.

Condition: good (used), Year of construction: 2013, functionality: fully functional, Gildemeister SPRINT 65 Linear IRCO Breuning bar feeder Ksdpfswwa U Ajx Aaljww Chip conveyor High-pressure unit with integrated paper belt filter system and cooling unit Fanuc 310 control Operating hours: approx. 61,550 Production hours: approx. 46,400 The machine can be inspected under power Immediately available

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, turning length: 1,000 mm, turning diameter: 570 mm, quill stroke: 190 mm, bed width: 360 mm, rotational speed (max.): 2,500 rpm, TECHNICAL DETAILS Swing over bed: 570 mm Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section according to DIN 770 hxb: max. 20 x 20 mm Thread pitch: 01-400 mm Main spindle Spindle head according to DIN 55 027: Gr. 8 Spindle diameter in front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Speed range gear stage I: 3–500 rpm Speed range gear stage II: 15–2500 rpm Constant cutting speed: 1–9999 m/min Speed control: 50–120% Load display in % on screen: 0–140% Main drive Three-phase AC motor: 0–120 kW Drive power (60%/100% duty cycle): 19/15 kW Maximum torque (60%/100% duty cycle): 1,800/1,400 Nm Total speed range: 3–2,500 rpm Number of gear stages: 2 Feed drives Feed range, flat and Longitudinal: 0.01-50 mm/rev Max. feed rate, transverse (rapid traverse): 5 m/min Max. feed rate, longitudinal (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Tool holder Number of tool holders: 8 Diameter of the 8 cylindrical shank holders according to DIN 69 880: 30 mm Tailstock Quill diameter: 80 mm Kjdpfxjwmck Ss Aaloww Quill stroke: 190 mm Inner taper of the quill: MK 5 Tip angle, normal: 60° MACHINE DETAILS Dimensions (L x W x H): 3.25 x 2.03 x 1.95 m EQUIPMENT - Disk tool turret for 8 tools with VDI 30. - Not for driven tools - Machine manual, technical documentation; - 3-jaw chuck, various tool holders

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2022.3781-03, turning diameter over cross slide: 365 mm, turning length: 4,000 mm, spindle speed (max.): 2,500 rpm, controller model: Siemens Sinumerik 810 D, TECHNICAL DETAILS Turning length: 4000 mm Swing over bed: 570 mm Kjdpev R Hamefx Aalsww Swing over cross slide: 365 mm Cross slide travel: 345 mm Center height over flat track: 280 mm Bed width: 360 mm Bed slide guide length: 520 mm Cross slide width: 225 mm Cross slide length: 680 mm Turning tool cross-section: max. 20 x 20 mm Faceplate diameter: 560 mm Chuck diameter: 250 - 315 mm according to VDF 6025 Control: SINUMERIK 810 D with screen Workpiece weight with tailstock: max. 1000 kg Workpiece weight with tailstock and 2 steady rests: max. 1600 kg Main spindle Spindle head according to DIN 55 027: Size 8 Spindle diameter in the front bearing: 100 mm Spindle bore: 62 mm Main spindle inner taper: 70 mm Main Drive Motor type: Continuously variable three-phase AC motor Drive power (60% / 100% duty cycle): 25/20 kW Maximum torque (60% / 100% duty cycle): 1,800/1,400 Nm Total speed range: 3 - 2,500 rpm (2-stage) Constant cutting speed: 1 - 9,999 m/min Feed drives Drive type: Three-phase servo drives (AC motor) Transverse and longitudinal feed range: 0.01-50 mm/rev Max. feed rate (rapid traverse): 5 m/min Conventional rapid traverse, transverse: 2.5 m/min Max. longitudinal feed rate (rapid traverse): 10 m/min Conventional rapid traverse, longitudinal: 5 m/min Transverse feed force: 7,100 N Longitudinal feed force: 12,500 N Tailstock Quill diameter: 80 mm Quill stroke: 190 mm Quill inner taper: MT 5 Tip angle, standard: 60° Thread pitch: 0.1 - 2,000 mm MACHINE DETAILS Floor space required: 6.83 x 2.16 m Machine height: 1.98 m Weight: 7,200 kg Total power consumption: 35 kVA EQUIPMENT - Sauter 8-station disc turret - Fixed steady rest - 8 cylindrical shank adapters - Coolant pump - Lubrication pump - Machine stand - Transport base - Main spindle brake - Operating instructions and circuit diagrams

Condition: used, CNC 3+2 axis vertical machining center DECKEL MAHO type DMU 35 M CNC control SIEMENS 810D with ShopMill Manufacturer no. 11065353554 Year of manufacture 2001 Travel paths: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Universal swivel - rotary table: 400 x 290 mm, center hole 30H6 Table load: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Kwsdpfjvt D D Uex Aalew Rapid traverse (X / Y / Z): 5 m/min Input resolution: 0.01 mm Total power requirement: 15 kVA Speed range - main spindle: 20 - 6,300 min/-1 Drive power - main spindle: 6.3 / 10 kW (100% / 40% ED) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Pull bolt: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Power connection: 400 volts, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3-axis controlled (X, Y and Z axis) - Manual swivel rotary table, C axis = table rotation 360°, B-axis = swivel range +105°/ -15° - direct path measuring system for all 5 axes - electronic handwheel - spindle drive via servo motor with toothed belt and 2 gear stages - fully protected cabin with sliding door - swiveling control panel - coolant nozzles on the vertical head - chip tray with coolant container and cooling lubricant pump - work area lighting - documentation available space requirement L x W x H 2000 x 2000 x 2100 mm weight 1750 kg good condition

Condition: used, Year of construction: 1998, honing diameter 90 mm stroke 490 mm throat 400 mm total power requirement 10 kW weight of the machine ca. 3.500 kg Kedpfx Aajt Hw T Sslsww dimensions of the machine ca. m

Condition: good (used), Year of construction: 2015, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 650 mm, 1 Horizontal machining center Kwodpfjuav H Njx Aalsw Make: STARRAG HECKERT, type: HEC 400D, year 2015, Control system, Siemens, type Sinumerik 840D, travel X/Y/Z = 650 x 650 x 650 mm, 2-fold pallet changer, pallet size 400 x 400 mm, NC rotary table 360x 0.001°, 80-fold tool changer, HSK 63 tool holder, spindle speed 15,000 rpm, IKZ 50 bar, belt filter, coolant temperature control, spindle cooling, chip conveyor, sound and control cabinets, operating hours 43,698, spindle hours 5,401

Condition: used, Year of construction: 1992, Technical details: x-travel: 800 mm y-travel: 550 mm z-travel: 500 mm spindle taper ISO: SK 40 control: Philips 532 quill stroke vertical: 80 mm turning speed range: 0-600 und 600-4000 steples U/min feed:: 1 - 3000 mm/min. rapid traverse: 6 m/min Kodpfx Asu Nda Eoalsww table surface area: 1100 x 600 mm table feed: 1 - 3000 /stufenlos mm/min switched on hours: 82194 h total power requirement: 9,6 (12 kVA) kW weight approx.: 4200 kg dimension machine xH: 2,9 x 2,2 x 2,5 m The machine is located in the technical department. further technical data: - vertical adjustment table (z-axis) 500mm - Headstock throat depth: min./max.: 200 / 750 mm Equipment: -coolant tank with pump -Manual control unit (hand operated) -linear measuring system Heidenhain *

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450/270/310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+90 [°] Kwjdpfx Ajuhbr Tealew - Indexing precision : 0.001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 40 TURNING SPINDLE - Spindle speeds : 8000 [rpm] - Max. bar diameter : 32 [mm] - C axis indexing precision : 0.001 [°] - Travel : 360 [°] POWER SUPPLY - Supply voltage : 400 [V] WEIGHT & DIMENSIONS - Machine floor space : 1500X2600 [mm] - Machine height : 2300 [mm] - Machine weight : 2850 [kg] MACHINE HOURS EQUIPMENT - CNC : Siemens 840 D - 3 colors status lamp

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, INDEX MS40-6 CNC Multi-Spindle Year of Manufacture: 2011 Commissioned: 2012 Control: Siemens 840D (Dual NCU) Bar Capacity: 40 mm Slide Units Position 1.1: X / Z NC controlled Position 1.2: X / Z NC controlled Position 2.1: X / Z NC controlled Position 2.2: X / Z NC controlled Position 3.1: X / Y / Z NC controlled (Y ± 21 mm) Position 3.2: X / Z NC controlled Position 4.1: X / Z NC controlled Position 4.2: X / Z NC controlled Position 5.1: X / Z NC controlled Position 5.2: X / Z NC controlled Position 6.1: X / Z NC controlled Position 6.2: X / Z NC controlled Position 6.3: X NC controlled, Z fixed Bar Feed IEMCA SIR MS40/33/P magazine bar loader Workpiece Handling Parts chute at spindle position 6 Workpiece conveyor at spindle position 6 Synchronization unit at spindle position 6.1 Parts ejector Coolant feed preparation through counter spindle Back-Working Attachment at slide position 6.2 Up to 3 fixed toolholders Auxiliary Drive Preparation Electrical preparation for 2 auxiliary drives with electronic shaft (positions 1–3), synchronous with main and counter spindle Electrical preparation for 2 auxiliary drives with electronic shaft (positions 4–6), synchronous with main and counter spindle Compatible with auxiliary drives with incremental encoder (double module) Chip & Coolant System Hinge-belt chip conveyor (cross type), discharge height 1200 mm, front discharge with lift pump for filter unit Coolant filtration unit (50 Hz): Coolant tank: 800 L Vacuum rotation filter: 650 L capacity Plate heat exchanger for coolant cooling Heat exchanger pump: 80 L/min 7 bar Low-pressure pump: 300 L/min 4 bar High-pressure pump: 55 L/min 40 bar Safety & Environmental Automatic CO₂ fire extinguishing system with optical/thermal detection Kedpfx Aajxndgzjleww Preparation for central exhaust system Shut-off flap for central oil mist extraction Control Options & NC Functions 16/16 freely programmable I/O interface Transmit / Tracyl function (milling cylindrical paths on OD and face) Dual transmit function for Y-axis transformation NC option: counter spindle / polygon turning with electronic shaft Process Monitoring Integrated ARTIS monitoring system based on torque, current, or power evaluation Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 1–3 Up to 4 channels (max. 8 drives) monitoring 4 tools simultaneously at stations 4–6