Column drilling machine

Böhrer SSB 3 A

Condition: used, TECHNICAL DETAILS - spindle speed : 400 - 4.500 [Rpm] - drilling capacity in steel / cast iron : 10 / 13 [mm] - drilling depth : 60 [mm] - column / spindle distance : 185 [mm] - useful table volume : 220 x 300 [mm] - motor power : 0.5 [kW] - supply : 220 [V] - speed selection through display of drilling diameter and material - electronic adjustment of the spindle speed - continuous adjustment of the spindle speed between 400 and 4500 Rpm - steady loading speed - drilling head with adjustable height through pneumatic compensator - fine adjustment of the drilling depth through millimetric vernier - electronic protection motor - base plate entirely machined (220 x 300 mm) Nwedpfeuhabtjx Aghep

Condition: ready for operation (used), A Hako compact sweeper with 2 disc brushes and central suction is available. Axle loads 1/2: 1200kg/1500kg, turning circle: 1390mm, engine: Yanmar 3TNV88C, power: 25.5kW, displacement: 1642cm³, cylinders: 3, emission stage: V, fuel capacity: 41l, forward/reverse speed: 25km/h/12km/h, operating hours: 97.6h. Machine dimensions X/Y/Z: approx. 3150mm/2000mm/1100mm, weight: approx. 2200kg. Documentation available. On-site inspection is possible. Nsdpfx Agjwaa Hqjhowp

Condition: new, Modern, precise production column drilling machine based on the proven UNIMAX 3 concept with stepless feed drive, automatic tool ejector, and standard chip breaker control. The digital display shows feed rate, speed, and drilling depth. Forward/reverse switch. Emergency stop button. Full motor protection. Preconfigured machine with optional thread cutting device, free-cutting function, and LED lamp. Standard drilling capacity in E 335: 30 mm Tapping capacity: M 20 Spindle: MT 3 Feed rate continuously adjustable in the range: 30 - 400 mm/min Programmable drilling depth: 125 mm Throat: 260 mm Distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm Total height: 1,900 mm Weight: 280 kg Pole-changing motor: 0.8/1.5 kW Spindle speeds continuously adjustable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Pre-configured machine including special equipment: - Thread cutting device Nodpjf Ey Ausfx Aghswp - Free-cutting function - LED lamp

Condition: good (used), Year of construction: 1984, machine/vehicle number: 15470, Offer 25095 Technical specifications: Nwsdjwd Ii Uopfx Aghep - Drilling capacity in steel ST 60: 40 mm - Drilling capacity in steel ST 60: 50 mm - Drill spindle mount: MT 4 - Drill spindle stroke: 180 mm - Drill spindle speeds continuously adjustable with gearing - Stage 1: 50 - 175 rpm - Stage 2: 175 - 640 rpm - Throat depth: 330 mm - 3 feed rates: 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots: 720 x 360 mm - Table height adjustable via rack and pinion with hand crank - Max. distance between table and drill spindle: approx. 780 mm - Max. distance between machined base plate and drill spindle: approx. 1250 mm - Coolant system - Lighting - Drive: 400 V / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 500 kg

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 23 mm throat 270 mm bore stroke 110 mm Nwsdpfx Aotqy Ngoghep taper MK 3 MK table-size 400 x 385 mm feeds mm/U turning speeds 135 - 825 U/min total power requirement 0,9 KW weight of the machine ca. 0,25 t dimensions 1,2 x 0,8 x 2,0 m

Year of construction: 1999, condition: used, CAPACITY 2000kgr Nwedpowa I A Tsfx Aghop HEIGHT 4.7M & 5M ARM LENGTH 3.2M 2 PIECES

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, ALZMETALL AX 4 / SV pillar drilling machine 3KW Manufacturer: Alzmetall Type: AX 4 / SV Condition: NEW Year of manufacture: 2025 Drilling capacity steel E335 (St 60) 55 mm Thread cutting Steel E335 (St 60) M 42 Cast EN-GJL-200 M 56 Short spindle MK 4 Spindle stroke 140 mm Usable projection 300 mm Column diameter 145 mm Machine table, usable support 615 x 430 mm Distance spindle-table min./max. 150/735 mm T-slots, number x width x distance 2 x 14 x 224 mm Feed 0.1 + 0.3 mm/rev Machine height approx. 1850 mm Net weight approx. 380 kg Drive stepless Motor 1500 rpm Power 3.0 kW Spindle speed rpm 70-2400 Standard equipment: Main switch with motor protection switch, lockable Mushroom push button (latching) for EMERGENCY STOP Speed adjustment stepless Speed display digital Feed overload protection Protection class IP 54 Spindle protection with electrical protection Paint: DD structural paint signal white RAL 9003, PANTONE 7545c, black Machine oil: initial filling; Container supplied loose Available options: - LED machine light - Thread cutting device with soft start (from 2025) Nedexd Ttpepfx Aghswp - Coolant device in the base - Digital drilling depth display - Drilling depth fine adjustment 0.1 mm

Condition: used, machine/vehicle number: 8580, 3 automatic feeds 01, 02 -0.3mm/rev Table clamping surface: approx. 500 x 370 mm Table height adjustable via rack and pinion Machining base plate approx. 350 x 320 mm Nsdpfxjwtdmuo Aghswp With motor: 1.5 kW, 1415 rpm, 380/220V

Condition: new, Drilling capacity ----- 50 mm Tap capacity ----- M33 Motor ----- 3 kW Speed range ----- 55 ~ 1450 rpm Spindle stroke ----- 210 mm Spindle mounting ----- MK4 Automatic spindle feeding ----- 0.1 / 0.2 / 0.3 / 0.4 mm/rev Nwodsga T H Iopfx Aghep Drilling table ----- 580 x 580 mm Foot ----- 860 x 580 mm Unloading ----- 375 mm Column diameter ----- 180 mm Maximum distance spindle - table ----- 800 mm Maximum distance spindle - foot ----- 1325 mm Weight ----- 860 KG INCLUDED * Motorized table adjustment * LED worklight * Cooling system * Digital depth stop * Tap function * 2-speed motor * CE plug * Case with various tools

Condition: new, Bernardo Gear column drilling machine GB 50 HS Drilling capacity in steel50 mmDrilling capacity in cast iron60 mmThread cutting max.M42Drill chuck1 - 13 mm / B 16Morse coneMK 4Spindle speed / number of steps40 - 2100 rpm / 12feed range0,1 / 0,2 / 0,3 / 0,4 mm/reach370 mmDistance spindle / table max.600 mmDistance spindle / base plate 1190 mmSleeve stroke 250 mmPillar diameter200 mmTable size / T-slot size 600 x 500 mm / 14 mmMotor power2,2 / 2,8 kWMachine dimensions (W x D x H) 700 x 1050 x 2350 mmWeight approx. 670 kgScope of supply - Toothed ring drill chuck 1 - 13 mm / B 16 drill chuck mandrel MK 4 / B 16 reduction sleeve MK 4 / 3, MK 4 / 2 - Motorised table stroke coolant device - Electromagnetic spindle feed - Thread cutting device - Automatic tool ejector LED machine light - Initial filling with Shell Tellus 46 - Digital speed display - Digital drilling depth display - Height-adjustable protective cover Nwsdpfx Asd Tm T Hsghsp