Chiller

AUTOTHERN

Condition: good (used), Year of construction: 2004, spindle passage 60 mm turning length 280 mm control 840 D Siemens turning speed range - drive spindle 6300 U/min drive capacity - spindle motor 3,3 kW turret 1 Scheibenrevolver no. of tools in turret 1 8 worktool system DIN 69 880 / 25mm x-travel 90 mm z-travel 280 mm feed power 5500 N rapid traverse 24 m/min power capacity - milling spindle 5000 kW turret Schwalbenschwanz no. of tools in turret 2 6 x-travel 81 mm z-travel 80 mm feed power 5500 N rapid traverse X-axis 16 m/min rapid traverse Z-axis 24 m/min weight of the machine ca. 2,5 t dimensions of the machine ca. 6,0 x 2,0 x 2,0 m TThe INDEX ABC machine is a compact lathe for short turned parts made from bar stock. It has an inclined bed design with two independent turrets. The top turret is primarily intended for internal machining and machining, while the lower turret is used for external machining. The turret arrangement enables collision-safe working and simple programming programming with high tool availability. The large free space in the working area enables a favourable chip fall The work area consists of two turrets: ‘Turret 1’ - Disc turret with 7 radially arranged tool holders Ø 25 mm DIN 69880 and a holder for the reinforced synchronised spindle on the turret station 8. tools with 1’ holders can also be used with an equalising holder can also be used. The turret is prepared for the V-ledge system. - Synchronised spindle for rear end machining, simultaneous parallel machining with main spindle. Ø42 collet chuck or 3-jaw gripper chuck for internal and external clamping and external clamping. Jaw stroke 0.6 mm. Clamping diameter (external) 75 mm. - Back-boring device. Starting from the centre of the working spindle in clockwise direction, 3 stationary back-boring tools are back boring tools are arranged. These are Dwodpfx Abewbvhaobef located in the pitch circle of the synchronised spindle. The back machining is carried out simultaneously with the machining on the the working spindle. Two additional tools can also be used, can be equipped with a tool feed drive. ‘Revolver 2’ - Turret with 6 symmetrical dovetail holders and each station with 2 locating holes for cylindrical shank per station. The following tool systems can be used. - stationary tools that can be moved in the Z direction - Driven tools with cylindrical shank Ø25 (can be used in two positions per station) can be used) - including bar loader LM 3200 - + various accessories (various Ø guide half-shells/tool holders) Technical data: - Material bar diameter: (Ø 25 / Ø 36 / Ø 52)- --> round Ø 8 - 25.4 / 8 - 36 / 8 - 52 mm --> square SW Ø 6 - 14 / 6 - 20 / 6 - 20 mm --> hexagon SW Ø 7 - 22 / 7 - 30 / 7 - 41 mm --> octagonal SW Ø 7 - 22 / 7 - 32 / 7 - 40 mm --> bar length max. 3200 mm --> from bars Ø 25 mm, min. 2,500 mm --> up to rods Ø 25 mm, min. 1,500 mm --> bar support = approx. 300 = 6 bars Ø 52 mm Mass (bar loader) = 700 kg

Condition: good (used), Used stainless steel agitator vessel with double jacket Item number: 10492 Final use: food Volume: approx. 1400 litres Type: Standing on 4 feet Material (wetted): 1.4301 stainless steel Design: With double jacket Manhole: 1250x420mm Hinged cover on both sides Dedpfxefiguuo Abbswf Base: Vaulted Top panel: Hinged lid Operating pressure according to type plate: ATM Tank dimensions: Outside diameter: 1460mm Cylinder height: 870mm total height: 2040mm total width: 1460mm height of the feet: 560mm materials: Interior: 1.4301 / AISI304 External parts: 1.4301 / AISI304 facilities: Double Jacket Nameplate: yes Outlet: 70mm Various connections Gratings Agitator

Year of construction: 2022, condition: as good as new (ex-display), 5 KW Air-cooled chiller for outdoor installation with axial fans. In standard equipment incl. p3 pump. Dwedefqlllepfx Abbsf Technical data on request . The machine is available from stock in Güglingen. We advise you gladly and free of charge for your application . We have constantly changing chillers from stock in all sizes as a demonstration machine or new partly also used . In addition, we partly take refrigeration systems in payment or buy them.

Condition: excellent (used), Year of construction: 2015, Ilapak Carrera 2000/40 high speed flow wrapper with intelligent infeed. Bought new in 2015 for protein bar project. Dwjdpfx Aeukxc Aobbjf

Condition: excellent (used), Brand: KENT Model: KGS-250AHD Type : Tangential Work surface 460x200 mm Longitudinal course 540 mm Cross course 260 mm Distance form center to table 490 mm Max. Weight on the table including magnetic chuck 103 for series 250 kg Dwodoh Ha Ipopfx Abbof 150 for series 818 kg Slote in T 14x 1 mm/N Longitudinal table speed 5- 23 m/min Crank cords feed 1 gra 0,02 mm - 1 rev 4 mm Automatic traerse feed per pass 0.1 -5.5 mm Automatic advance 50 Hz- 820 mm /min. - 60Hz 980 mm/min Wheel size 180 x 13 x 31. 75 mm Spindle speed 50 Hz 2850 rpm - 60 Hz 3480 rpm Upright crank 1 gra 0,01 mm - 1 rev 2 mm Automatic feed increment 0,002- 0,02 mm Spindle motor 2 x 2 HP X P Hoist motor NA kg x cm Hydraulic motor pump 1 X 6 HP X P Drain motor 1/8 X 2 HP X P Transverse agace engine 1/5 x 6 HP X P Machine height 1775 mm Machine dimension 3260 x 2460 mm Net weight 1300 kg Gross weight 1500 K

Year of construction: 2003, condition: like new (used), machine/vehicle number: D150P511007, 2003, stainless single shot depositor, rise and fall head, 25L depositor, mobile frame, Dwodpfx Abodwhfgebjf

Year of construction: 1999, condition: excellent (used), injection molding machine krauss-maffai 150-700 c1 Djdpfx Aboh S Dncobjwf year 1999 Screw diameter 55 mm In top condition, still in operation

Year of construction: 2025, condition: new, Standard version with column Motorised height adjustment 700 mm Articulated arm length 2x 1.100 mm Dwedpfjgn Tzljx Abbef Height adjustment of grinding spindle 130 mm Grinding motor 5,5 kW including the following options: + speed control, spindle speed approx. 250 - 1.000 min-1 + pneumatic grinding pressure support + bellows cover for column and trapezoidal spindle + Incl. foundation screws and mounting template Grinding tools optionally available Request more information

Condition: excellent (used), Year of construction: 2003, Battenfeld 1300/350BJ 2003Sleisskraft 130 TOScrow 40 mmOperating hours 77890 hHolmenabstand 42x42 Dwedpfx Aod Tnbhjbbef

Condition: excellent (used), Urschel GRL strip cutter for French fries. The machine has been serviced and is ready to work. SPECIFICATIONS Dwedsv Srfqspfx Abbsf Length: . . . . . . . . . . . . . . . . . . . . . . 59.25" (1505 mm) Width: . . . . . . . . . . . . . . . . . . . . . . . 63.38" (1610 mm) Height: . . . . . . . . . . . . . . . . . . . . . . 53.24" (1352 mm) Net Weight: . . . . . . . . . . . . . . . . . . . . . 906 lb (411 kg) Motor: . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HP (1.5 kW) The Urschel® Model GRL is designed specifically for strip cutting plain and crinkle cut potato strips. Transverse fracturing and feathered edges of french fry pieces are minimized and longer cuts are produced with greatly reduced scrap. The machine features continuous operation for uninterrupted production, and simplified design for easy cleanup and maintenance. Maximum product infeed is 9" (229 mm) in length.