Pillar Drilling Machine

ARBOGA A 2508

Year of construction: 1996, condition: good (used), machine/vehicle number: 337978, Technical data: - Drilling capacity in steel ST 60 25 mm - Drilling spindle holder MK 3 - 8 drilling spindle speeds 100 - 2700 rpm - drill spindle stroke 130 mm - 4 feeds 0.1 - 0.3 m/rev Bcedpfefmh R Ujx Aa Uow - Overhang 270 mm - Column diameter 115 mm - drilling unit + table height adjustable -with crank handle over rack - Table dimension 350 mm - Drive 400 V / 0.8 / 1.1 kW - Space requirement approx. W 800 x H 1850 x D 900 mm - Weight approx. 250 kg

Condition: ready for operation (used), Pressing force: 300 kN/30 t Tool height: 200 mm Stroke length: 0 – 300 mm Bending capacity with prism tool MW 125/240: 200 x 16 / 200 x 24 mm Bending speed: 0 – 1.3 m/min Drive motor: 380 V, 5.5 kW Weight: 800 kg Bcjdpfxox Apgcj Aa Uew Space requirement: 1250 x 820 x 1120 mm

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Length: 3700mm Bjdpoxf Ey Rsfx Aa Ujcw Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1986, Offer 23389 Technical data: - Drilling capacity in steel ST 60 30 mm - Drill spindle holder MK 3 - 4 feeds 0.1 - 0.16 - 0.25 - 0.4 mm/rev Bodporckv Hjfx Aa Uocw - Drill spindle speeds in gear stages 95 - 2000 rpm - Drill spindle stroke 160 mm - throat depth 350 mm - Table with 3 T-slots height-adjustable 340 x 320 mm - Table can be tilted left + right - max. distance table - drill spindle 500 mm - max . Distance machined base plate - drill spindle 1050 mm - Column diameter 160 mm - Coolant device - Lighting system - Drive 400 V / 2.4 kW - Space requirement approx. W 600 x H 1950 x D 800 mm - Weight approx. 350 kg

Condition: new, ROGI SAW MACHINE TYPE CY355 INVERTER VARIO SPEED SEMI-AUTOMATIC Sawing dimensions ----- 3770 x 34 x 1.1 mm Cutting speeds ----- variable 20-80 M/min. Motor Power ----- 2.2 KW - 400V - 3 Phase Weight ----- 855 KG Cutting capacity 90 ----- 355 mm / 490 x 300 mm Cutting capacity 60 ----- 230 mm / 180 x 220 mm Cutting capacity 45 ----- 350 mm / 290 x 340 mm Cutting capacity -45 ----- 290 mm / 250 x 250 mm INCLUDED Saw band Bcjdsga Tzxepfx Aa Ujw Workpiece stop Pedestal Pressure gauge for sawbelt tension Saw band guide with carbide inserts Hydraulic quick-clamp Cooling pump Hydraulic bag cylinder Motor protection switch Automatic end stop

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, - eccentric clamp, - base, Bsdpfx Aaehpktvj Uscw - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: good (used), Year of construction: 1990, machine/vehicle number: 328501, Offer 25366 Bodpfx Asxu U Susa Uecw Technical Data: - Drilling capacity: 25 mm - Spindle taper: MT 3 - Spindle speeds: 100 / 205 / 345 / 440 rpm and 695 / 885 / 1450 / 2900 rpm - Spindle stroke: 130 mm - Spindle overhang: 260 mm - Coordinate table with 3 T-slots: 580 x 240 mm - Table travel X-axis: 415 mm - Table travel Y-axis: 155 mm - Drive: 400 V / 0.75 / 0.9 kW - Required space: approx. W 900 x H 1800 x D 700 mm - Weight: approx. 270 kg - Machine vice

Condition: used, Year of construction: 2003, Technical details: bore capacity in steel (diameter): 25 mm throat: 255 mm bore stroke: 140 mm spindle taper MT: MK 3 spindle speed:: 105 - 2980 / 8step U/min Distance spindle/table max.: min.: 350 / max.: 950 mm table clamping surface:: 420 x 270 mm table rotating: 360 ° table swivable approx.: 30° links / rechts drill table adjustment: 600 manuell mm column diameter: 100 mm current- max.: 400 V / 50 Hz A Bcedpfeu Idhyox Aa Uow total power requirement: 0,9 kW weight of the machine ca.: 180 kg dimension machine xH: 0,6 x 0,5 x 1,8 m Equipment: Röhm quick-action chuck 3 - 16mm Switchover for clockwise/anticlockwise rotation for thread cutting *

Condition: as good as new (ex-display), DEMONSTRATION MACHINE For sale is an as-new Drechselmeister Twister FU 180 wood lathe with a center distance of 560 mm. The demonstration machine is in its original condition, so you receive full warranty coverage. Technical Specifications - Center height: 180 mm Bsdpfx Aaotphy Aj Uocw - Swing over bed: 358 mm (can be extended with optional outboard turning attachment – depending on workpiece) - Center distance: approx. 560 mm (extendable) - Spindle connection: M33 x 3.5 with ASR (Euro) anti-loosening groove* - Spindle and tailstock taper: MK2 - Speeds (2 belt ranges): 50 – 1,230 rpm and 150 – 3,700 rpm - Quill travel: 100 mm (with scale), with trapezoidal threaded spindle - Motor: 1.1 kW / 1.5 HP (230 V) - Total length: 1,345 mm - Weight, freestanding version: 144 kg The machine is located in A-5431 Kuchl and can be inspected at any time during our business hours. Subject to prior sale! Shipping by carrier: Austria: € 95.00 incl. VAT Germany: € 120.00 incl. VAT South Tyrol: € 140.00 incl. VAT If you are interested in this machine, please enter your complete address details in the contact form so that we can process your inquiry professionally! Thank you, your NEUREITER Team Related terms: woodturning machine, lathe, woodworking lathe, turning, woodturning, turning tools, wood turning, machinery Reference: R-A0117

Condition: excellent (used), Year of construction: 2005, Mechanical guillotine shears Fab. Petersen Machinery Type. Cidan HSM-F 20/3 Year 2005 Technical data Make: CIDAN Type: HSM-F 20/3 Sheet width: 2050 mm Sheet thickness: 3 mm Cutting angle 2° Connection 400V / 20A Dimensions: approx. L 2.60 x W 1.60 x H 1.40 Weight: approx. 1.5 tons Equipment - Man. Backgauge 750mm - Continuous hold-down device with hard rubber strip - Angle fence - Extendable support table All information without guarantee. Bcedpfx Asu Utaisa Usw A demonstration is possible at any time in our showroom.