Press brake

AMADA HFT 80/25

Condition: used, Year of construction: 2005, AMADA - HFT 80-25 - 2005 - 80 t capacity - 2500 mm table Njdpeytrwtofx Agwocp - stroke 200 mm - weight 5750 kg - under power - used machine, good condition

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays Ncjdpfox D D Hyox Agwep • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: used, Year of construction: 2006, pressure 80 t chamfer lenght 2550 mm distance between columns 2050 mm Stroke beam 200 mm max. opening beam/table 470 mm Njdpfxjtv Rlbo Agwocp C-recess 350 mm max travel X-axes 700 mm Z1+Z2 axes controlled by cnc nein, manuell 4 finger mm max. distance R-axes 200 mm Quick speed,inspeed 100 mm/sec bendingspeed 0-10 mm/sec opening speed 100 mm/sec Number of working hours 43000 h length 3100 mm width 1600 mm height 2550 mm weight 5750 kg total power requirement 9 kW dimensions of the machine ca. 3x2x2,5 m Control Amada OP2002 All machines can be viewed under power at all times. Demonstrations of the machines possible at any time.

Condition: good (used), Year of construction: 1999, machine/vehicle number: 190454, Offer 25290 Technical specifications: - Max. working width: 3040 mm - Max. material thickness at 40 kg / mm² strength: 2 mm - Preselectable bending angle: 6 – 135° - Maximum opening / stroke of the upper beam: 250 mm - Height adjustment: - of the bending beam: 50 mm - of the lower beam: 50 mm Nodpfx Agow Sthdowjcp - Upper beam drive: 400 V / 0.37 kW - Bending beam drive: 400 V / 0.75 kW - Manual backgauge - Segmented gooseneck bending rail - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx.: 3500 kg

Year of construction: 2001, condition: refurbished (used), low price laser cutting machine NTX48 1,5kW refurbished, MAZAK lasercutting machine with 1500W table size: 2500mm x 1250mm machine dimension 2,6m x 6m parts conveyor full covered machine table FE: 12mm VA: 6mm plastics possible to cut incl. software Ncodpfx Ajhturcsgwep incl. exhauster to test under power ! option: warranty, setup, training

Condition: reconditioned (used), functionality: fully functional, control type: manual, actuation type: hydraulic, working width: 60 mm, stroke length: 105 mm, throat depth: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table height: 970 mm, back gauge: 345 mm, overall weight: 2,800 kg, total length: 1,420 mm, total width: 1,100 mm, total height: 1,800 mm, Press Brake Brand: PROMECAM Model: PPH25.12B Capacity: 1200 x 25T Distance between uprights: 1020 mm Throat depth: 200 mm Ncedpfx Aoxwukcjgwop

Condition: used, functionality: fully functional, An industrial decanter is a type of centrifuge used to separate solids and liquids in industrial processes, such as wastewater treatment, olive oil production, brewing, starch extraction, etc. GEA two-phase decanter separators have been specially designed for olive oil extraction. The drum has a cylindrical part that allows an efficient separation and clarification of liquids. The centrifugal force projects the solid particles against the drum wall, which is transported by the auger to the solids outlet. The separated and clarified oil phase discharges by gravity through the liquid outlet regulated by diaphragms of the decanter, while the solid phase leaves the decanter through the solids outlet. Ncjdpfjwny N Ijx Agwop Solids: 1.8 kg/dm3.

Condition: new, DESCRIPTION DM100 Z2C - performs edge rounding and removes sharp burrs from both the inner and outer edges of steel, stainless steel or aluminium parts after laser, shear or punch cutting of metal parts from 50 x 50 mm up to 1100 x 100 mm in size. Ekdjtxp Ncedpfx Aged Ixadjwop The 1st station processes the products through a contact roller (approx. 55° shore) with an abrasive belt and removes strong burrs in the first step. The 2nd station processes the products with 2 counter-rotating cross belts each from below and from above. The cross belts round off the parts to be machined on both the inner and outer edges. A big advantage is also the deburring of products with surface protection foil, because only the edges are processed without damaging the foil. Technical data - DM1100 Z2C: Working capacity (Ø mm) 1100x100 No. of belt stations (Z) 1 No. of cross belt stations 2 Abrasive belt, dimensions (mm) 1100x2200 Abrasive belt speed (m/s) 8-22 Cross belt speed (m/s) 2-8 Feed speed (m/s) 0.6-3.2 Sanding belt motor per head (kW) 18.5 Cross belt motor (kW) (2x) 3 Feed motor (kW) (3x) 0.18 Total power (kW) 33 Power consumption (A) 62 Rod suction connection per head (Ø mm) 150+185 Dimensions (mm) 3600x2330x2350 Weight (kg) 5000

Condition: reconditioned (used), Year of construction: 2007, MAZAK QUICK TURN NEXUS 200-II MSY Max. turning diameter: 380 mm Max. machining length: 511 mm Max. milling speed: 4,500 rpm Max. spindle speed: 5,000 rpm Max. bar diameter: 65 mm Machine is equipped with: Nsdpfxeyhwy Ij Agwecp - CNC control Mazatrol Matrix - KITAGAWA three-jaw chuck for main spindle, diameter 210 mm - KITAGAWA three-jaw chuck for secondary spindle, diameter 169 mm - Tool Eye - C-axis - C-axis on sub-spindle - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - Chip conveyor - 8 stationary tool holders - 2 driven tool holders

Condition: good (used), functionality: fully functional, Year of construction: 2018, operating hours: 7,238 h, Technical Data Press Force: 360 kN Bending Length: 1020 mm Useful Installation Height: 295 mm Clear Column Distance: 932 mm Throat Depth: 150 mm Working Height¹: 1150 mm Backgauge Axis Travel Values Y-axis Stroke: 120 mm X-axis Travel: 235 mm (max. backgauge area) X-direction: 500 mm R-axis Travel: 75 mm Control Basic Configuration: Windows XPe, PC-based control, Pentium M 1.1 GHz, 15" Connection Values Electrical Connection approx.: 6 kVA Dimensions and Weights Required Floor Space (length × width): 1805 × 1330 mm Height: 2380 mm Weight: 2600 kg Standard Equipment of the TruBend 7036 Machine Stable Machine Frame: Welded construction, stress-relieved heat-treated for both standing and seated operation, includes two side columns, table, and crossbeam. Press Beam: Stress-relieved heat-treated, deformation-optimized. Upper Drive: Highly dynamic, electromechanical direct drive (torque motor), max. working speed of 25 mm/s (depending on selected die width and operating cycle). Inductive Length Measuring System with Temperature Compensation Control Cabinet Air Conditioning Nsdpfoyfxfnjx Agwjcp Ergonomic Machine Design Backgauge System 3-Axis Rear Backgauge System (one gauge finger): Highly dynamic, safety 3-axis rear backgauge system. Rack-and-pinion drive, CNC-controlled X, R, and Z axes freely programmable, providing a highly adjustable gauging depth and height for maximum precision. Fiberglass gauge finger with hardened metal stop. Tool Clamping Upper Tool Clamping: Enables quick and precise tool change—vertical and horizontal; fixed, self-centering. Lower Tool Clamping: Individual V-dies are placed on a special plate. Clamping: by hand, hardened clamping bar and retainer bar. Safety Safety Devices: Safety ensured by emergency stop push button, 2-button foot pedal for both standing and seated operations, laterally sliding protective doors, as well as rear and side safety guards. The side safety guards are made of transparent, impact-resistant plastic. Control TRUMPF TASC 6000: The TRUMPF TASC6000 control system is based on Windows XPe OS, with 1.1 GHz Pentium M and 15" touchscreen, USB interface, and 1 GB RAM. Optional Equipment Levels Backgauge System 6-Axis Rear Backgauge System (2 gauge fingers) Tool Clamping Tool clamping for AMADA US-Style upper tools (manual) Safety BendGuard (with block laser): Optoelectronic safety device enabling fast and safe bending. Permitted press beam speed in foot mode: 220 mm/s Control Graphical Workplace Programming