Punch Laser Machine

Trumpf TRUMATIC 6000L

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Ncsdpfxsm Ak Huo Agwop Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: good (used), Year of construction: 2000, 1 used 4-roll sheet metal bending machine Brand: Stöting Type: VB 322 Serial number: 1591 Year of manufacture: 2000 With Acon control system Working length: 1000 mm Maximum sheet thickness: 12 mm Bending capacity: 8 mm Top roll diameter: 250 mm Bottom roll diameter: 210 mm Side roll diameter: 169 mm Dimensions: L: 3200 mm W: 1370 mm Height (without support arm): 1370 mm Drive power: 6.5 kW Ncsdpfxsv Ibkbe Agwop Weight: 3.2 tons

Year of construction: 2006, operating hours: 46,547 h, condition: excellent (used), functionality: fully functional, Laser punch press Trumpf TruMatic 6000 L with TrumaLift SheetMaster, ToolMaster and GripMaster as well as and scissor lift table. SheetMaster: not only loads and unloads the machine, it also sorts the parts the parts reliably ToolMaster: automatically changes the tools quickly, safely and conveniently GripMaster: reliably moves residual grids and strips TECHNICAL DETAILS working area: 2585 x 1280 mm Control: Siemens Sinumerik 840 D Ncjdpfon Nxw Dsx Agwjp laser power: 3200 watt sheet thickness mild steel: max. 8 mm sheet thickness stainless steel: max. 8 mm sheet thickness aluminum: max. 4 mm workpiece weight: max. 200 kg Accuracy: +/- 0.1 mm Punching force: 22 t punching diameter: max. 76,2 mm C-axis punching: 330 rpm stroke sequence: 450 - 1000 1/min stroke sequence marking: 2800 1/min MACHINE DETAILS Laser switch-on time: 46,547 h cutting time: 23.580 h length: 7500 mm width: 8100 mm height: 2400 mm Weight: 16000 kg (basic machine) Operating voltage: 400 V / 50 Hz Connected load: 76 kVA

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2008, operating hours: 72,918 h, laser power: 2,700 W, punching force: 22 t, sheet thickness (max.): 6 mm, sheet thickness steel (max.): 8 mm, sheet thickness aluminum (max.): 4 mm, TECHNICAL DETAILS Combined punching/laser operation: 2,585 x 1,650 mm Punching mode: 3,085 x 1,740 mm Ncjdpfxjw Suwyo Agwjp Laser operation: 3,085 x 1,650 mm Outputs Laser power: 140 - 2,700 W Maximum sheet thickness: 8 mm Cutting capacity for mild steel: 8 mm Cutting capacity for aluminum: 4 mm Cutting capacity for stainless steel: 6 mm Maximum punching force: 220 kN Active hold-down device (programmable in stages): 4.5 - 20 kN Maximum workpiece weight: 230 kg Speeds Maximum positioning speed X-axis: 90 m/min Y-axis: 60 m/min Simultaneous (X and Y): 108 m/min C-axis punching: 60 revolutions/min Thread forming: 180 revolutions/min Punching stroke sequence (E = 1): 900 1/min Marking: 2,800 1/min Tools Linear magazine: 18 tools with 3 clamps Tool change time: 1.5 - 5 s Tool accuracy Position deviation: ±0.10 mm Average position spread: ±0.03 mm Programmable slides for punched and laser parts (max.) Size: 500 x 500 mm TRUMPF CNC control: based on Siemens Sinumerik 840D MACHINE DETAILS Laser switch-on time: 72,918 h Cutting time: 18,536 h Space requirement (width x length): 7,900 x 9,100 mm Height: 2,400 mm Weight: 22,500 kg Laser gas consumption CO2 / N2 / He: 1 / 6 / 13 l/h Connected load: 73 kVA

Condition: used, Year of construction: 2014, max. turning diameter 160 mm max. turning height 150 mm max. workpiece diameter 100 mm max. workpiece height 150 mm max. turning speeds 6.000 U/min travel -x axis 700 mm travel -z axis 375 mm c-axis 360 ° Ncodpfxsqvd Iqo Agwop control FANUC Vertical Turning Machine | EMAG - VL2 equipped with a workpiece conveyor belt. The machine is in very good condition. Please note that the technical details were added from comparable machines. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: VL-2 | VL 2

Condition: ready for operation (used), Year of construction: 2014, operating hours: 48,274 h, number of axes: 6, pressing force: 326 t, This TRUMPF TruBend 7036 press brake was manufactured in 2014. It features a robust welded steel frame, electro-hydraulic top drive, and a 2D graphic control DA 69 system on a 10.4" color screen. The machine includes a CNC backgauge with 6 axes, hydraulic tool clamping, and CNC crowning for precise bending. Regularly serviced under a TRUMPF maintenance contract. Contact us for more information about this machine. • Free column clearance: 3680 mm • Installation height: 535 mm • Control system: 2d graphic control da 69 on windows with 10. 4" color screen • Electrical equipment: for three-phase current 400 v / 50 hz • The machine was serviced annually • Maintenance contract in place • Sturdy machine frame, welded all-steel construction • Press beam with high bending strength • Highly dynamic electromechanical direct drive (torque motor) • Electro-hydraulic top drive via proportional valves • Modern block hydraulics • Inductive length measuring system with temperature compensation • CNC backgauge system: 3-axis (X1, R1, Z1) and 6-axis options Ncedex D D Hyspfx Agwep • Rack and pinion drive for X and R axes • Safe, front-accessible movement of stop fingers • Modufix top tool holder system, self-centering, manual clamping • Manual lower tool holder for EV dies, hardened, programmable offset • Integrated TRUMPF TASC 6000 control • Numerical workshop programming • Embedded Windows XPe operating system, Pentium M 1.1 GHz • 1 GB RAM • 15-inch touchscreen • Network-enabled, teleservice via modem • Control cabinet climate control • Side-hinged safety doors and rear protective cover • 2-button foot switch for standing or seated operation • Rear work area LED lighting • Front work area LED lighting • Ergonomics package: comfortable front work surface and footrest • 2 storage brackets and 2 document trays • 24000 operating hours, brakes replaced 2024 • Tools maintenanced by TRUMPF, all in tolerance Additional equipment • Backgauge system with 5 axes and control cabinet climate control • Upper tool clamping: hydraulic and hardened • Lower tool clamping: hydraulic • CNC Crowning • BendGuard safety device • Foot switch • 2x support consoles, front • 1x bending aid with 900 mm parking position • Table extension for base table / additional table Technical Specification Bending Length 1020 mm

Condition: used, functionality: fully functional, Year of construction: 2003, FLEXIbend RAS 73.30 - General technical data in mm: Bending length: 3200 mm Maximum sheet thickness (400 N/mm²): 3.0 mm Maximum upper beam stroke: 300 mm Backgauge system (U gauge): 10-1550 mm Optional extension: (-3050) Machine dimensions (largest possible option): 4360 x 5220 mm Basic machine weight: 4400 kg - Machine-specific data: Motorized operation; 400V, 50/60 Hz, 3-phase Year of manufacture: 2003 Condition: Refurbished – very good used condition Complete tool set, with specific max. sheet thickness 2-person operation from the front Second foot switch for operation from the rear (incl. light barrier for working from behind) Nsdpfx Agsx Hx Slowjcp 15" CNC color graphic touchscreen control panel Touch&More CNC rear gauge and support system (10-1550) Backgauge system (standard): 10-1550 mm - Sample images -

Condition: ready for operation (used), Year of construction: 2016, Control Unit Brand OKUMA Model OSP-P300S-H Nsdpfox D R Uwsx Agwscp Movement Y-Axis Movement 160 Additional Equipment Y-Axis Machining Kit: Helical interpolation /Y-axis turning function with offset turning toolholders/ Coordinate conversion /Double pressure clamping system for main spindle chuck via M-codes (irreversible) /Double pressure clamping system for sub-spindle chuck via M-codes (irreversible) 60 tool ATC / High-pressure coolant preparation: 70 bar/ External coolant pump: 0.8 kW, 6 bar, 20 L/min/ Electric spindle orientation /Air blast for chuck cleaning Collision Avoidance System (CAS)/Chip Conveyor Preparation/Big Bore Spindle ASA 6": 22/15 kW, 3800 rpm/ High-precision C-axis positioning/ Continuous B-axis/ Tool Magazine with 60 positions/ 0.1 Micron Resolution Software/ API Library 2 for OSP-P300S/ Standard Right Side Chip Conveyor/ 15 Bar Coolant Pump 20 L/min/ Filtration unit with 4 fabric filter bags (25 micron), pump 15 bar, 20 L/min SCHUNK ROTA THW+260-81R A8 chuck with KITAGAWA SS1770 cylinder for Big Bore main spindle SCHUNK ROTA THW+215-66 A6 chuck with KITAGAWA SS1452 cylinder for sub-spindle 5-Axis Machining Kit: Super NURBS on 5 axes /Vector control /DNC-DT interface /Tool position control/ 3D coordinate transformation /Helical interpolation (includes inclined plane profile software) This 5-axis OKUMA MULTUS B300 II W was manufactured in 2016. It features an ASA 8 spindle offering 5,000 rpm and 65 mm bar capacity, capable of handling a max turning diameter of 630 mm. It includes a high-pressure coolant preparation of 70 bar, a continuous B-axis with HSK63, and a tool magazine with 60 positions, optimizing both turning and milling capabilities. If you are looking for high-quality turn-mill operations, consider this OKUMA machine. Contact us for more information about this machine. Application Types Turning

Condition: like new (used), Year of construction: 2017, TRUMPF TruDisk 5001 (6C) * MFD 2017, as-new condition * laser power: 5 kW * wavelength: 1030 nm * beam quality: 4 mm mrad * beam switch for 4 fiber exits, min. fiber diameter: 100 µm Ncjdpfx Ajqfguasgwep * fiber connector: LLK-D * option: field bus interface & IIO3-card * 2 identical lasers available

Condition: good (used), Year of construction: 2017, In this offer you buy used office furniture, which is in good condition. They were delivered in 2017 and are generally in very good condition, since little used. Items for sale: We also offer workplace sets for 450€. 1x desk - Manufacturer: FM - 160 x 80 x 76 (stepless height adjustable 68cm to 76cm) - gray top - aluminum frame 1x office chair "Dauphin MagicShape elan - armrests - completely adjustable - cover polo grey/black 1x mobile pedestal - Manufacturer: FM - 43,4 x 80 x 59 - one material drawer - 3 steel drawers with softclose - lockable incl. key Desks: - Approx. 10x desk from the manufacturer FM 1600 x 800 x 680 to 760 (infinitely height adjustable) in the color light gray. Frame made of aluminum - Approx. 12x folding table (can be used as a desk) 1600 x 800 x 720 on castors, in the color light gray. Aluminium frame - Approx. 2x round meeting table 1000mm diameter in the color light gray. Aluminium frame - Approx. 4x high table 1600 x 800 x 1300 in the color arctic white. Frame in white aluminum Nodpfx Ageiiv Ikowocp Chairs: - Approx. 10x Dauphin swivel chair MagicShapeS elan with armrests and fully adjustable. Fabric cover Polo black, base plastic black - Approx. 44x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in ruby red color. Metal frame chrome-plated. - Approx. 52x Interstuhl Hero 550H cantilever chair with armrests. Upholstery in the color ocean blue. Metal frame chrome-plated. - Approx. 10x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color black. Frame in silver color. - Approx. 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ocean blue. Frame in silver color - 12x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color red. Frame in the color silver - 16x Interstuhl Kinecticis5 710K bar stool with footrest. Upholstery in the color ruby red. Frame in the color silver Storage space: - Approx. 16x FM 434 x 800 x 590 mobile pedestal with one material drawer and 3 steel drawers. Body completely in the color light gray. Handles made of aluminum meeting table with 4 conference chairs - 750,-€ net high table with 6 bar stools - 1500,-€ net Prices may vary slightly depending on the quantity purchased. We will be happy to prepare a suitable offer for you. You can also purchase each piece of furniture separately. Condition: This offer is used furniture, which may show signs of use (minor scratches or yellowing). Packing and shipping: You are welcome to look at everything during our business hours. Please make an appointment for this! Seaworthy packing and worldwide shipping is possible on request! For more information you can of course also contact us personally.