Plate Shear - Hydraulic
AMADA GPN 425

Name: AMADA GPN 425
Brand: AMADA
Availability: InStock

Condition

Used

Location

Ahaus

Show map

Machine data

Machine type:: Plate Shear - Hydraulic

Manufacturer:: AMADA

Model:: GPN 425

Condition:: good (used)

Price & Location

Location:: 48683 Ahaus

Call

Details about the offer

Listing ID:: A20314745

Reference number:: 1125-9325431

Update:: 16.10.2025

Description

sheet width 2540 mm
plate thickness 4.0 mm
thickness at "Niro-steel" 3.0 mm
9.0 St.
back stop - adjustable 100 mm/sek
cutting angle 1° 20
table height 855 mm
table depth 500 mm
no. of strokes 33 - 55 Hub/min
0 max. 250 bar
engine output 5.5 kW
weight of the machine ca. 5000 kg.
range L-W-H 2960 x 1990 x 1700 mm
From a maintenance workshop
Good / well-maintained condition (!!)
Itsdpfx Aoxn Tx Hjg Ujb

Equipment:
- Powerful electro-hydraulic guillotine shear
- AMADA NC control unit
* Pivoting control panel, front left
- NC electro-motorized material backgauge
* Backlash-free ball screw
- Manual cutting gap adjustment with 2 levers
- 1x long side stop
- 1x support arm
- Rigid welded machine body
- Sighting device with three mirrors (cutting according to marking)
- Front safety guard (finger protection)
- 1 freely movable foot switch
- Operating instructions (PDF)

* Special accessories included:
- Sheet metal holding device for thin sheet metal blanks

Seller

Last online: Today

Registered since: 2011

767 listings online

Call

Send inquiry

Telephone & Fax

+49 5939 ... show

Fax:

These listings may also fit your interest.

Listing

Germany

1,293 km

Plate Shear - Mechanical
AMADAGPN 425

Call

Listing

CNC Coordinate Measuring Machine Wenzel LH 87 3 D

Germany

1,293 km

CNC Coordinate Measuring Machine
WenzelLH 87 3 D

Call

Condition: ready for operation (used), Year of construction: 2006, Working range X/Y: 1000mm/2200mm, accuracy: 0.8 + L/450µm, max. workpiece weight: 800kg, machine dimensions X/Y: approx. 3000mm/2800mm, weight: approx. 4000kg. Including Wenzel HT 400 hand control, computer with 2 TFT monitors and Kyocera laser printer. Without measuring probe. Documentation available. On-site inspection is possible. Isdpsu T Rhzofx Ag Ujtb

See details

Listing

Roller leveller DREHER 1645-AV Modell 738

Eislingen/Fils

1,357 km

Roller leveller
DREHER1645-AV Modell 738

Call

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm Itjdpfx Aecxxx Reg Ujb control, very good condition

See details

Listing

Hydraulic guillotine shears LVD HST-C 3100 x 10 mm CNC

Deinze

846 km

Hydraulic guillotine shears
LVDHST-C 3100 x 10 mm CNC

Call

Condition: ready for operation (used), sheet thickness steel (max.): 10 mm, back gauge: 1,000 mm, power: 21 kW (28.55 HP), total length: 4,330 mm, total width: 2,200 mm, total height: 2,110 mm, empty load weight: 10,000 kg, workpiece length (max.): 3,100 mm, CNC Siemens achteraanslag en snijhoekverstelling 2 voorste steunpunten van 3 meter Handmatige afstelling van de messpeling Instapbeveiliging aan de achterzijde Ijdsv Taiaopfx Ag Uetb Strokes/min: 9 > 40 str/min Adjustable cutting device: 0,1 > 1,5 mm Backgauge: 1000 mm Siemens Adjustable cuttingedge: 0,5° > 2,5° Courant needed: 380V Number of sheet holders: 17x

See details

Listing

Economical Laser Cutting Machine Bodor A4

Thailand

9,823 km

Economical Laser Cutting Machine
BodorA4

Call

Condition: new, Year of construction: 2025, Entry-level sheet fiber laser metal cutting machine Lower laser cutting cost and easy operation The modular cutting machine table with stiffeners saves time for disassambly and improves convenience and rigidity. The special fiber laser nozzle and cutting process ensure faster carbon steel oxygen cutting, more gas-saving low-pressure stainless steel nitrogen cutting, and better-quality carbon steel air cutting. Fiber laser heads are able to detect jutting obstacles to effectively reduce the damage rate and save the maintenance cost of a laser cutter. Applicable Material: metal Condition: New Itsdpfx Agshv U Swj Ueb Laser Type: Fiber Laser Laser Power: 1000W, 1500W, 2000W, 3000W Cutting Area: 4000*1524mm Cutting Speed: 0-100m/min Positioning accuracy: ±0.05mm Repositioning accuracy: ±0.03mm Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

See details

Listing

Decoiler - expansion mandrel 10 t SCHLEICHER

Freudenberg

1,137 km

Decoiler - expansion mandrel 10 t
SCHLEICHER

Call

Listing

Germany

1,100 km

Recoiler - mandrel 12,5 t
FROEHLING

Call

Listing

USED CNC-PRESSBRAKE MANUF. TRUMPF, MODEL TRUBEND 3100 TRUMPF TRUBEND 3100

Kopenhagen

1,362 km

USED CNC-PRESSBRAKE MANUF. TRUMPF, MODEL TRUBEND 3100
TRUMPFTRUBEND 3100

Call

Condition: used, Year of construction: 2021, Max. pressure 100 ton Max. bending length 3060 mm Distance between uprights 3384 mm Isdpfexr U Nhjx Ag Uetb X-axis movement 600 mm Length of stroke (extended) 350 mm Daylight (Extended) 580 mm Automatic crowning on lower tool base Controlled axis: Y1, Y2, X1, X2, Z1, Z2, R1 & R2 Control: Trumpf T3500T (3D colour/grafic visualization ) Equipped with: Tool package for 15.000 euro. 2 manual “lay up” arms Trumpf manually quick clamp top tool holders in full width - made by Wila Machine appears as brand new. Price when bought in 2021: Euro. 115.000

See details

Listing

Eccentric Press - Single Column Schuler CR 80-345

Schmölln

1,429 km

Eccentric Press - Single Column
SchulerCR 80-345

Call

Year of construction: 1980, condition: used, pressure 80 t throat - mm stroke 50 mm table surface area 875 x 695 mm ram surface 350 x 355 mm ram adjustment 71 mm no. of strokes 30 - 90 Hub/min distance between columns 450 mm weight of the machine ca. 6,2 t dimensions of the machine ca. 2,0 x 2,1 x 3,2 m daylight (stroke down, ram adjustment above) 480 mm Iedpfx Aodlcy Hsg Ujtb Further information: - the machine is currently being a partially overhauled - the machine was re-equipped with the following components: * separate control cabinet with touchscreen including cabling * new painting of the individual components in the dismantled state After the partial overhaul, the machine is safe for manual insertion open tool, a current UVV test is carried out before delivery and braking time measurement.

See details

Listing

Decoiler- and Straightening Machine BAD SALZUNGEN MR + MHD 250/4

Schmölln

1,429 km

Decoiler- and Straightening Machine
BAD SALZUNGENMR + MHD 250/4

Call

Condition: used, sheet width 250 mm coil outside dia. 1400 mm weight max. in kg 2500 kg plate thickness 2 ... 4 mm straightening feed 2,5 ... 15 m/min coiler: expanding range mm Itjdpfx Agsfn Aqmj Ujb total power requirement 1 + 4 kW weight of the machine ca. 1,8 t dimensions of the machine ca. m decoiler, MHR 250/4: max. coil diameter: 1400 mm coil diameter inside: 450 - 530 mm unbraked decoiler with pressure roller straightening machine, MR 250/4: Belt infeed height: 1250 mm The system was dismantled, checked and repainted.

See details

Advertise here

Plate Shear - HydraulicAMADA GPN 425

Machine data

Price & Location

Details about the offer

Description

Seller

Send inquiry

Telephone & Fax

Plate Shear - Hydraulic
AMADA GPN 425