Dust collectors

AL-KO mobil power JET 250

Condition: used, Year of construction: 2019, Edge Control Numerical Control Panel height min - max mm 6 - 60 Pvc/Abs up to mm 3 Minimum panel length \ width mm 140 \ 60 Feed speed up to mt/min 10 / 25 continuously Working height electronically adjustable by C.N Lateral roller conveyor with idle wheels for panel support Rectifier unit with 2 motors Coil holder plate Gluing unit for EVA \ PUR glue with cartridge or granular system Edge pressure group on straight profiles with pressure rollers electronically adjustable by N.C Trimming unit with 2 motors Gleaning group with 2 tilting motors electronically adjustable by C.N. Rounding unit with 4 multifunction motors (edger + rounder) with regulation by numerical control in automatic Edge scraping unit with electronic regulation from N.C. Glue scraper group Brush group Machine length mm 6500 approx Weight Kg 2750 approx Rodpfx Aaewwhn Ds Esck

Condition: excellent (used), Year of construction: 2017, HOLZ-HER SPRINT 1329 edgebander Main Advantages and Features: ● Construction: Robustly built, stable form, and excellent vibration dampening. ● ● Control Panel: Intuitive panel with a 15-inch touchscreen monitor, allowing for easy input, storage, and display of processing data, as well as machine control. ● ● Automation: Automatically records information about used programs, processed item counts, and machine operating time. ● Quiet Operation and Safety: Noise-reducing protective covers minimize noise and enhance workplace safety. ● Programming: Programmed HOLZ HER control ensures full functionality of the edgebander, with the ability to run complete machining programs. ● Motorized Adjustment: Motorized adjustment of the height of the workpieces. ● Transport: Rollers at the infeed and outfeed of the machine. The machine's transport chain has automatic lubrication. Detailed Specifications and Equipment (Working Units): 1. Pre-milling Unit 1802 (2 x 2 kW, 12000 min⁻¹): ○ One synchronous and one counter-rotating unit with two K/F 70-64 30 diamond milling cutters. ○ Motorized adjustment of milling thickness (max 3 mm). 2. Edge Feeding Unit 1901 Synchro: ○ Allows for precise adjustment of the edge overhang, significantly contributing to edge savings. ○ Edge feeding from a single plate with a diameter of 820 mm. Loading width for strip edges: 40 mm. 3. Glue Jet 2.3 Gluing System (Patented System): ○ No glue roller – glue is applied via a nozzle. ○ Compatible with both EVA glues (granules and cartridges) and PUR glues. ○ Full adjustment of the start and end of glue application, as well as glue application height depending on the workpiece thickness. ○ Hybrid technology, heating time: 3-4 minutes. 4. Pressure Zone 1913 MOT (Motorized Adjustment): ○ Three pressure rollers, with the first one driven and made with SYNCHRO technology. ○ The other two rollers are tilted for better pressure on the edges. 5. Trimming Unit 1928 (2 x 0.45 kW, 12000 min⁻¹): ○ Pneumatically adjustable. ○ For precise trimming of edges up to 60 mm thick with HM saw blades. ○ Both units adjustable 0-10°. Two saw blades Ø110. 6. Multi-functional Milling Unit 1826 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ Designed for profiling edges from 15° to 90° or straight. ○ Uses diamond tools made with AIR STREAM technology. ○ Tool radius R=2 mm. 7. Corner Rounding Unit 1833 MOT4 (2 x 0.65 kW, 12000 min⁻¹): ○ Motorized adjustment. ○ For corner rounding on the fly, with HM tools up to max. R=3 mm. ○ Ability to duplicate radius milling on the edge. ○ Uses diamond tools. ○ Tool radius R=2 mm. ○ Workpiece thickness 10-60 mm. 8. Scraping Unit 1929 MOT4 (Profile Scraper): ○ Motorized adjustable. ○ For scraping PVC and ABS. ○ Max radius up to R=3 mm. ○ Equipped with two replaceable knives, blow nozzles, and dust extraction. 9. Polishing Unit 1964 (2 x 0.12 kW, 1400 min⁻¹): ○ Consists of two cleaning units with rotating felt discs. ○ Both units adjustable 0-5° for improved cleaning effect. 10. Netsystem 1856: ○ A set of 4 spraying nozzles (two at the front, two at the rear of the machine). ○ Liquid with anti-adhesive and cleaning properties. ○ Ensures an invisible joint and a pleasant finish. Rsdpfjwn Nuajx Aa Ejck

Condition: used, Power connection 480V 4kW Rcsdsvz U Srspfx Aa Eok Filter area 15.8 m² Vnom 3200 m³/h Vmin 2262 m³/h Extraction connection D=200 mm Weight approx. 550 kg LxWxH: 2400 x 900 x 2100 mm

Year of construction: 1988, condition: ready for operation (used), I sell the flader orbital brushing machine. Model Quickwood Fladder Rcodpfx Aasf Rth Te Eok Working width 1060mm Mechanically adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Denmark Hansen - Hundebol AS

Condition: new, carrying capacity 500 kg. number of suction cups 6 Stück suction cup dia. 215 mm 0 8,0 m³/h tool adaptor Kranöse 80,0 mm voltage 400 V Rcsdpfx Aaoxak Ddj Eek total power requirement 0,18 kW weight of the machine ca. 120 kg. dimensions of the machine ca. 2400 x 1100 x 584 mm Furnishing : - for the horizontal transport of smooth, dry and airtight panels - Robust supporting structure made of steel - Painted in RAL 2000 with low weight - Galvanized longitudinal beam with a length of 2,400 mm - 3x galvanized crossbeams with a length of 1,000 mm - 6x springy, articulated and adjustable suction cup holders - 6x suction cups Ø 215 mm - Low-maintenance, very high-quality, dry-running rotary vane vacuum pump - with a suction capacity of 8 m³/h and a final vacuum of 85% (150 mbar) - 3 phases 230/400 V + PE, 50 Hz, with cable (approx. 0.5 m long) - Operating handle can be extended to 1,000 mm from the center of the traverse - Sturdy metal case for your crane control - Operation "suction / release" by hand slide valve - Control and safety device for vacuum lifters * Robust control box. * Contactor circuit for the vacuum pump * Safety warning device with audible alarm * Vacuum gauge with danger zone indicator * Large vacuum storage tank with safety check valve * Double actuation when releasing the load - Fine dust filter to protect the vacuum pump - Documentation * Special accessories included: - 6x ball valves to switch off individual suction cups * so that smaller formats can also be lifted * without having to move suction cups or traverses - Spiral connection cable small helix * with an extension length of 3,500 mm, version as * Extension cable with CEE plug and coupling * is routed to the lifting device next to the load chain

Year of construction: 2016, condition: good (used), • Edging thickness coiled edging: 0,4 - 3 mm • Edging thickness of cut-length edging: o max. 3 mm with unit FF701 o max. 8 mm without unit FF701 o max. 15 mm possible through tool change at trimming unit • Edge height: max. 65 mm • Workpiece thickness: 8 - 60 mm • Workpiece width: min. 65 mm • Workpiece length: min. 160 mm • Feed speed: variable 10 - 18 m/min LUMINA 1380 Ltronic Motor-driven pressure bridge adjustment Automatic lubrication of the transport chain Preparation RETURN-connection Electric for variable feed 400 V / 50 Hz, 2.2 kW Operation Edge Control 19 with 18,5" Touchscreen ECO MODE power-saving mode Pre-milling unit 1802 with 2 milling units Edge feeder MG701 SYNCHRO automatic transport of roll and strip products Rcedpfjwkf Twex Aa Esk Ltronic LT702 NIR+ Laser Edging Unit Glue application system Glu Jet GJ302 automatic motorized, automatic adjustment of gluing height (tracing nozzle) (EVA, PUR) Glu Jet rinse hopper Change carriage GJ302 Change carriage LT702 Pressure section 1913 MOT: first roller driven, 2 support pressure rollers Sprayer unit after pressure unit with use of antistatic coolant End trimming unit1918 (60 mm) pneumatic Form trimming unit FR701: Play-free mechanism and 6 fully digital NC servo-axes ensure Form trimming unit FF701: Play-free mechanism and 4 fully digital NC servo-axes ensure 100% repetition accuracy at the touch of a button. Scraper unit 1929 MOT4 with motor-driven adjustment for sensing rollers Surface glue scraper FK701 With pre and post tracing device for scraping out superfluous glue on the complete panel length for a clean glue line. Sprayer unit1856 for the in- and outfeed area Buffing unit 1940 For edge cleaning and polishing

Condition: used, Year of construction: 1993, used dust extractor Year of manufacture: 1995 Motor 2.2 kW Extraction nozzle 160 mm Rcsdpovymgfefx Aa Esk 20 m² filter surface Nominal volume flow 1900 cbm/h with automatic pneumatic cleaning with 2 filter cartridges and 2 dust collection bins Height 2500 mm Length 2200 mm Availability: short term Location: Röllbach

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Rcjdpfxow Naaze Aa Esk NESTRO® extractor, a new generation, powerful, compact, economical, and with some highlights that will inspire you. Vacuum filter for extraction and filtration of wood dust and wood chips. H3 test according to GS-HO-07 (BGHM), GS scheduled. Fire extinguishing device, fire protection flap / oxygen closure. Vacuum filter with JET compressed air pulse cleaning including suction nozzle, 5 m cable for socket connection (protective measure grounding), suction connection left / fan right Technical data: • Airflow max./nom.: 6,000 / 5,850 m³/h • Vacuum max./nom.: 2,950 / 2,400 Pa • Suction side connection: Ø 300 mm • Mode of operation: continuous operation • Current type: three-phase current • Power consumption: 7.5 kW / 16 A / 50 Hz • Fan/drive: IE3 asynchronous motor • Filter area: 36.2 m² • Filter regeneration: JET / automatic • Compressed air consumption per cycle: 560 Nliters • Chip disposal: chip bin with PE bag • PE bag (consumable): 500020 • Collection volume: 3 x 0.16 m³ • Weight: approx. 1,250 kg • Noise level according to EN 11201: 72-74 dB(A) in accordance with MRI (+/- 4dB) • Length x width x height: 3880 x 1020 x 2250 mm Required connections: • Compressed air standard coupling NW 7.2; 6 bar, compressed air dry and oil-free • 1 x 32 A CEE socket / fuse 25 A For systems with chip sack filling, uniform filling cannot be guaranteed due to different extraction volumes and varying chip/dust contents Availability: short-term Storage location: Flörsheim

Condition: used, functionality: fully functional, Year of construction: 2024, operating hours: 40 h, load capacity: 2,500 kg, lifting height: 4,700 mm, free lift: 1,540 mm, fuel type: electric, mast type: triplex, construction height: 2,185 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, empty load weight: 4,680 kg, total length: 2,480 mm, drive type: Elektro, construction width: 1,180 mm, Electric 4-wheel forklift Load center: 500 Fork width: 120 mm Fork thickness: 40 mm ISO class: ISO class 2 = 1,000 - 2,500 kg Mast type: Triplex Technical condition: very good Front tires type: solid rubber Front tires size: 7.00-12 (5.00) Front tires condition: 80 - 100% Rear tires type: solid rubber Rear tires size: 18x7-8 (4.33) Rcodpewvwv Uefx Aa Ejk Rear tires condition: 80 - 100% Battery voltage: 48V Battery Ah: 600Ah Battery manufacturer: Heli Battery year of manufacture: 2024 Battery condition: new Load protection grid, side shift, 3rd valve, 4th valve, rear work light, front work light, Half cabin, CE certificate, safety light, suspended seat, automatic filling system warning light

Year of construction: 2017, condition: ready for operation (used), General Data Machine weight 3750 kg Rjdpfex D Ntljx Aa Ejck This Toyota 06-8FG20F was manufactured in 2017. A robust used forklift with a lift capacity of 2000 kg and a triplex mast type, it reaches up to 4700 mm. It features an LPG drive, 1200 mm forks, and super-elastic tires. Ideal for heavy lifting with 5,608.2 operating hours. Consider the opportunity to buy this Toyota 06-8FG20F forklift. Contact us for more information about this machine. Application Types Other Automation Equipment