Clean air extraction system with briquette press

AL-KO

Condition: used, Year of construction: 2023, Used plant Year of manufacture: 2023 Condition: Like new, the plant was never put into production operation Equipment and technical data: Stationary clean air filter unit ECO JET DUO 6 XL ZRS 2 x 7.5 kW For extraction of wood dust and wood chips - Fans: 2 x 7.5 kW - Air volume flow: 10,000 m³/h - Negative pressure: 2,700 Pa (total) / 2,200 Pa (static) - Filters: 80 units of 2.50 m each - BIA Category M, electrically conductive - Filter area: 77.6 m² - Filter surface load: 129 m³/(m²xh) - Filter cleaning: AL-KO OPTI JET® - Pressure relief surfaces: 0.84 m² (bursting discs) - Base frame with discharge chute and rotary valve Dry discharge with C-coupling Consisting of: - ECO JET DUO 6 UPPER SECTION, 2 x 7.5 KW: Clean air filter unit; 2 x 7.5 kW fans; AL-KO OPTI-JET filter cleaning; Including pressure relief surfaces and Dry discharge with C-coupling; Without filters and control system; Including pressure switches - ECO JET DUO 6 ZWR XL - 1100 MM: Spacer ring for increased expansion or unit height With 2 connection openings for intake nozzles - Base frame with discharge chute and integrated rotary valve 960/1 FG: Iedpfxsyk I U Ao Afnjan For removal of chips via on-site transport fan into existing silo or similar Transport pipe DN 200 mm, approx. 1,260 mm long underneath the rotary valve, connection to transport pipe by customer Rotary valve certified according to ATEX Directive 94/9/EC Technical data ZRS 960/1FG: CE 0588 Ex II 1D/- (indoor/outdoor device); EX D (protection system); FSA 11 ATEX 1614X Motor power: 0.18 kW / 0.78 A 3 Ph / 400 V / 50 Hz Protection type/Design: IP 54 / B3 Insulation class: F Speed: 41 rpm Throughput*: 15,744 l/h* Number of cells: 7 Inlet/Outlet cross-section: 960 x 250 mm / 960 x 208 mm Dimensions (WxDxH): 1,100 x 605 x 330 mm Temperature range: up to 50°C *depending on material - FILTER & SUPPORT CAGE 2.5 / CAT M EL WHITE FILTER ECO JET DUO 6: 80 units required Filter BIA Category 'M' – electrically conductive; 2.50 m length, including support cages; 77.6 m² filter area - Intake nozzle 400 mm: with non-return damper in rectangular duct - ECO JET backflow damper 910x346x500 - Control cabinet – AL-KO Control System: BASIC CONTROL ACS II WITH TOUCHSCREEN DISPLAY: Base unit for cascade control of 2 fans via frequency inverter (FU) up to max. 37 kW; corresponding power section and controls as well as the frequency inverter are included in the base unit; the frequency inverter is installed in the control cabinet Cascade operation with FU changeover: Fan 1 runs via the frequency inverter (FU); when threshold reached, switch to mains operation; Fan 2 takes over the FU and control as needed; Basic functions: Control voltage 24 V Touchscreen display, ST 1200 control, Sitop Power power supply, Collective fault monitoring Display of fault messages in plain text on the display and collective fault lamp in the door Manual discharge start via display button Start filter cleaning via differential pressure Manual start of filter cleaning via button Post-cleaning supervision Brand monitoring...

Condition: new, Year of construction: 2025, Another machine immediately available! Iaodpfjv Rpxlex Afnjn Briquetting press with PLC control and automatic briquette length adjustment Throughput: up to max. 60 kg/h Briquette: 50 mm cylindrical Motor: 5.5 kW Dimensions: 1,900 x 1,350 x 1,410 mm Weight: approx. 860 kg Requirements: Feed material should ideally be shorter than 25 mm chip length Moisture content 6–12% ATRO Machine suitable for intermittent operation. E.g. briquetting for up to 2.5 hours; 1 hour break, etc. If the machine needs to run longer than 2.5 hours continuously, optional cooling must be connected.

Year of construction: 2009, condition: used, offer consists of: Alko Mobil-100 trimmings blower Iaedpfsu Srn Nox Afnjn for perfect binder - weight: 24kg We can also organize the following for you: packaging, loading, transport ( by ship or plane) including customs

Year of construction: 2020, condition: used, functionality: fully functional, Good day, We hereby offer you, without obligation, a used mobile extraction and raw air dedusting unit. Manufacturer: AL-KO Therm GmbH, Germany Model: Mobil 100, 230 V Raw Air Dust Extractor Year of manufacture: 2020 Max. air flow rate: 865 m³/hour Vacuum: 1,780 Pa Motor power: 0.75 kW, 230 V/50 Hz Filter area: 1.1 m² Chip/dust collection volume: approx. 90 L Chip collection volume: 90 L (collection bags not included) Inlet diameter: 100 mm Dimensions: 883 x 479 x 1622 mm (L x W x H) Ijdpfxsyi Hmzj Afnoan Weight: 26 kg Note: The AL-KO MOBIL raw air unit series is ideal for use in processing plastics, styrofoam, paper, metal, or glass. The robust construction and high extraction capacity ensure reliably clean air at the workplace. Thanks to its low weight and industrial-grade castors, the MOBIL raw air dust extractors can be easily transported to any work location. Changing the chip collection bag is straightforward using a quick-release clamp. In wood processing industries, raw air dust extractors are not approved for use with wood dust in workrooms in Germany, Austria, and Switzerland. Disclaimer: The above technical data was taken from the manufacturer's manual, brochures, or other sources, for which we cannot assume any liability for their accuracy or completeness. Scope of delivery: 1 x AL-KO MOBIL 100 raw air dedusting unit We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: as good as new (ex-display), Year of construction: 2021, Working width: 520 mm Planing shaft: tersa Number of knives: 4 Dressing table length: 2720 mm Adjustment dressing table: Lever Hollow point adjustment: no Gap removal display: Scala Hollow pointed joint display: - Dressing stop angle adjustable: yes Iajdpfx Asgr Udvjfnjn Motor power: 7 kW Machine length: 2800 mm Machine width: 1000mm Weight: 870 kg

Condition: new, The AL-KO COLOUR JET paint mist extractor is used to extract toxic mist in the workshop. The AL-KO COLOUR JET is therefore ideal for paint extraction in timber-processing operations, in carpenters' and joiners' workshops and in the craft sector in general. The AL-KO COLOUR JET is a fold-out paint mist extraction system. It is delivered as a plug-in paint mist extraction system. Iaedpfx Aehby Rijfnsn Motor 0,75 / 2,1 kW ex/ 400 V / 50 Hz Fan speed 960 / 1.430 RPM capacity 3.000 / 6.800 m3/h dimensions (B/ W/ T) 1.912 x 1.405 x 943 mm with attached side panels 2.971 x 1.405 x 1.215 mm filter area 2 m2 noice level 72,0 dB(A) weight 248 kg

Condition: new, Clean Air Filter Type: Power Unit 300 P Offer Type: New Machine Iedpshfmpxjfx Afnsan Technical Specifications: Motor Power: 7.5 kW / 3-Phase / 400 V / 50 Hz Intake Port: NW 300 mm Nominal Flow Rate: 5,089 m³/h Max. Flow Rate: 6,000 m³/h Valve Pressure at Vnom: 2,434 Pa Filter Area: 30 m² Compressed Air Cleaning Incl. Integrated Pre-Separator Incl. Integrated Automatic Extinguishing System Chip Collection Volume: 3 x 250 l Sound Pressure Level: 71 dB(A) Incl. Dust Partition Dimensions L x W x H = 3,000 x 1,058 x 2,361 mm Weight: 838 kg

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler spindle diameter: 30 mm speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm machine depth: 1400mm weight: 1000 kg Iaodpfx Aowx Nnbefnsn

Condition: good (used), Year of construction: 2000, Paint mist extraction Colour Jet 58-1 Isdjxflunspfx Afnjan - Year of manufacture: 2000 - 1 kW - new filter - with side guide plates - 5800 m³/h - Weight 105 kg

Condition: excellent (used), Year of construction: 2001, Suction unit Alko Mobil Jet Year of construction 2001, 0,75 kw H2 tested 220 Volt, Filter area 3.45 m² 1085 x 650 x 1974 mm Nominal volume flow 700 m³/h Manual cleaning 82 db(A) Spigot 100 Ø New waste garbage can Iedpfxjq Abzhj Afnoan

Year of construction: 1990, condition: good (used), Sideloader used Kalmar, Iajdpfoh Et E Nsx Afnon unit was well maintained Rest see pictures

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Machine height: 2200 mm Iaedpfx Aeyffx Ijfnen Weight:

Year of construction: 1998, condition: good (used), Sawdust extractor,dust extractor,self-cleaning filter,vacuum ALKO ECO JET Filter cleaned pneumatically by impulses of compressed air during operation, thus high efficiency of the device. Ideally suited for all kinds of dry dust in various technological processes. It is possible to replace the filter bags according to the requirements and purpose. Year of manufacture 1998 5.5 Kw fan located on the clean side which reduces the risk of explosion initiation to a minimum Inlet diameter 250 mm Capacity 4320 m3/h Filtration area 29 m2 Vacuum 3700 Pa Extinguishing system "fireman" Air return ATEX flap flap noise damper Extinguishing system *firefighter*. Control cabinet with automation to run 8 machines Technical documentation Iaodpfx Aoiu Hq Dsfnon Dimensions of Extraction: Height - 3.05 m Base width - 2.75 m x 1.00 m

Condition: used, Total height 6500 mm Floor space 2000 x 2000 mm Outdoor installation Compact filter series Model PKFP – 1 element – 1.92 x 1.92 Shaking filter Overpressure operation Filter hose length 2500 m long – 180 mm diameter - then 105 m2 filter area 2 raw air fans – 2 pipes (diameter 300 mm) 1 x fan KT 300, 15 kW power 6361 m³/h built in 1999 1 x fan S 25 / 300, 7.5 kW power 7400 m³/h, built in 1993 1 x transport fan 6.1 kW, power 57 m³/min, built in 1996 Total approx. 14,000 m3/h volume flow Briquette press Höcker Polytechnik type BrikStar C 3 - 12. 1225 Motor 3.0 kW, briquette diameter 65 mm, output approx. 40-45 kg/h depending on the specific weight of the material. Isdpfx Afovviytsnean Storage location: Nattheim

Condition: ready for operation (used), Width 70 cm Length 160 cm Height 220 cm Motor 2.2 kW Iasdpoygxdgefx Afnen