Used three-jaw chucks for sale (500)

Condition: good (used), Year of construction: 2010, 4 jaw air chuck SCHUNK Type: ROTA TB 850-270 LH/4 Year 2010 with control unit . Chuck diameter 850 mm Hedpfx Ajubbx Hjalefd Bore 270 mm Jaws are individually adjustable with many soft jaws in good condition.

Year of construction: 2010, condition: good (used), Power chucks for vertical and horizontal CNC lathes Make:RÖHM Type:KFD 400 Tie rod M24 Nmax:2000 rpm Hfodpfx Aeikzzpsalod Good condition .

Condition: good (used), Year of construction: 2015, Manual collet chuck Fabr.Ortlieb Type: SSF60/8 Year 2015 Hodpfx Aaoucw Hpjlefd Max. throughput : 60 mm Spindle speed Max : 3000 rpm Spindle holder DIN 8 In good condition without collets .

Condition: like new (used), Year of construction: 2010, Hydr.power chuck Fabr.RÖHM Type : KFD-315 Bj.ca.2010. Diameter :315 mm Hjdpfxsqxavlo Aalofd Nmax:2800rpm in very good condition

Year of construction: 2005, condition: good (used), Wooden power chuck Fabr.FORKARDT Type:3QLC/K250-72-Z8-S12-172005 Hedpfsgqxg Hjx Aalefd Bore in chuck 72mm with clamping cylinder complete Year 2005 in good condition.

Year of construction: 2000, condition: good (used), 3-jaw wedge bar chuckFabr.SMW Typ:HG 200 bj.ca.2000Bore 50mmFlansch Aufnahme Diameter 170mmWithout jaws,with chuck key.chuck in good condition. Hjdjd Sym Ajpfx Aalsfd

Condition: used, Year of construction: 2005, Hydr.3-jaw power chuck FORKARDT Type:3KS630 built approx.2005 Diameter.630mm Pulling rod winning M30 With 1Parr hard jaws Hedpfx Ajchfr Nsalsfd Fmax 13000daN Max speed 1200rpm Good condition.

Condition: reconditioned (used), overall weight: 30 kg, chuck outer diameter: 200 mm, three-jaw chuck diameter: 200 mm, short taper mount: 6 mm, through hole: 45 mm, Three-jaw power chuck including 1 set of stepped block jaws Manufacturer: FORKARDT KTNCV 200-45. Three-jaw power chuck; the price listed applies to 1 three-jaw chuck with stepped block jaws. ----- Jaw travel is actuated via clamping cylinder and draw tube. Chuck no. 1485270 with through-hole clamping (pass-through bore). ----- Cylindrical flange mount according to DIN 55027 Short taper, taper size: KK6 ----- Three-jaw power chuck with quick-change system Also suitable for reversible base jaws Type: FGB 200 ----- Jaw interface: Base jaw type: helical gearing; Designation → Size: FGB200, SGB200 ----- Draw tube connection M52 x 2 mm Cylindrical mount for spindle flange ø 170 x 6 mm Mounting bolt circle for 3x ZK screws approx. 135 mm Hfsdpfowuux Dsx Aaled ----- The chuck is in near-new condition. Weight without clamping jaws approx. 25 kg ----- Delivery without base and top jaws. *If you have any questions, please feel free to contact us. *Shipping costs for international delivery available on request.

Condition: good (used), Year of construction: 1994, Diameter: 500mm 3 Chuck: yes Spindle bore:160mm Hfsdpfox Ttc Ejx Aaled Connector: CAMLOCK D-8" Max. speed: 1900Rpm Length: 0mm Width: 0mm Height: 0mm Weight: 60kg

Condition: used, diameter 400 mm boring diameter / mm - / SMW-AUTOBLOK power chuck HFK 400 Diameter: 400mm Inner diameter: 100mm Hfjdpfxsidrkfj Aalod n-max: 2300 rpm Chuck width: 140mm Tube length: approx. 890mm Weight: 130kg max. operating force: 10000 daN

Year of construction: 2015, condition: excellent (used), Three-jaw chuckMake Röhm Diameter 200 mmmwith individually adjustable jawsShort taper size 6Taper diameter 106.390Hole diameter 133.4Weight 24.5 kgBJ estimated Hfsdpfx Aaod Th I Toled

Condition: excellent (used), Eccentric chuck with key (28133) in sturdy wooden transport box make Klopfer type EZ 32 diameter 160 mm total diameter 265 mm Hfodpfjgzlmwex Aaled height 180 mm KK receptacle size 5 cone diameter 82,575 mm bolt circle diameter 104,8 mm eccentric adjustment range 0 - 32 mm Mounting flange can be exchanged if required

Condition: used, Three jaw Chuck (223/5) Diameter 190 mm Height 130 mm Hfsdpfx Aaoddym Rsled

Condition: used, Three-jaw Chuck Hjdpfx Aeddzhrealsfd Make Mundorf Diameter 315 mm Type 2b 60 kd

Year of construction: 2010, condition: excellent (used), Three-jaw chuck Make Forkardt F 250 Hfedsfb T Dbjpfx Aaljd Thread adapter 105 x 6 mm Cylinder diameter 105 mm outer diameter 250 mm Inner diameter 63 mm Chuck height with flange 180 mm Age was estimated

Year of construction: 2011, condition: excellent (used), Lathe chuck diameter 330 mmHeight 100 mmWeight 57 kgBuilt year was estimated Hjdpfx Aasd Na Spjlefd

Condition: excellent (used), Wedge bar chuck (28319) Hfodoiuvumspfx Aalod diameter 290 mm Cylindrical 78 mm thread increase 6 mm Weight 54 kg

Condition: excellent (used), functionality: fully functional, three-jaw chuck diameter: 160 mm, Three-jaw chuck eccentric – clamping chuck Hjdsg Umb Ejpfx Aalefd 1 piece used, very well-maintained Horvath Fischer eccentric clamping chuck (three-jaw chuck) with a diameter of 160 mm, maximum adjustable eccentricity: 25 mm, chuck mounting cylindrical with a diameter of 150 mm, complete with chuck key and one set of hardened stepped jaws as well as the installation and operation manual for the Horvath eccentric chuck, all likely in the original wooden box (Hahn & Kolb). Year of manufacture unknown. From our own inventory. Eccentric lathe chuck for clamping workpieces on a lathe. Price €195 net ex stock, plus packaging costs. All technical data subject to errors and omissions. We sell exclusively to countries of the European Community.

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck Hfodpfx Aswtl Rnealod -Manufacturer: AROWA, three-jaw chuck chuck size Ø 200 mm -Passage: Ø 55 mm -Bolt circle: Ø 175 mm / M10 -Accessories: incl. 2nd set of interchangeable jaws -Dimensions: Ø200 x 105 mm -Weight: 13.8 kg

Condition: used, diameter 250 mm Hsdpfxet Nzfqj Aalefd

Condition: excellent (used), Faceplate (28517) Diameter 400 mm Hfjdpst R S A Nefx Aalsd Mounting KK 6 Cone diameter 106.39 mm 4 stud bolts M 12 Pitch circle diameter 133.4 Weight 80 kg

Condition: good (used), Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Key bar chuck: without clamping jaws -Chuck size: Ø 290 mm -Bolt circle: 170 x 21 mm -Through hole: 80 mm -Dimensions total: Ø 290 x 91 mm -Weight: 33.4 kg Hsdpoxc Hfpjfx Aalsfd

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws -Top jaws: Jaw set for three-jaw lathe chuck -Jaw width: 26 mm -Dimensions: see photo technical drawing -Number: 1 set of interchangeable jaws available Hjdpjxdiz Njfx Aaljfd -Dimensions total: 110/79/H66 mm -Total weight: 2.9 kg/set

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws -Interchangeable jaws: 3-piece hard top jaw set -Width: 40 mm -Dimensions total: 107/120/H55 mm -Total weight: 3.2 kg Hodpfx Ajxdm D Iealefd

Condition: good (used), 4-Application chuck, key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, hydraulic chuck -Manufacturer: Forkardt, power chuck type KSH 200 -Chuck size: Ø 200 mm -Jaw width: 24 mm -Passage: Ø 49 mm -Mounting: Cone Ø 105-102 mm Hfjdpfjv Tvi Nex Aalod -Thread: M52 -Dimensions: Ø 200 x 130 mm -Weight: 23.1 kg