Used industrial robots for sale (1,219)

Condition: ready for operation (used), Year of construction: 2022, This 6-axis Mitsubishi RV-7FRLM-D robot arm was manufactured in 2011. It features a vertical multiple-joint structure, capable of handling a maximum load of 7 kg with a reach radius of 908 mm. The robot is equipped with an AC servo motor and can be installed on floors, ceilings, or walls. It operates efficiently with a cycle time of 0.35 seconds and has an IP67 protection degree. Consider the opportunity to buy this Mitsubishi RV-7FRLM-D robot arm. Contact us for more information. • Structure: Vertical multiple-joint type • Environmental Specifications: Oil mist • Protection Degree: IP67 • Installation: Floor / Ceiling / Wall-mounted • Degrees of Freedom: 6 • Drive System: AC servo motor (all axes with brake) • Position Detection: Absolute encoder • Load Capacity Maximum: 7 kg/ Rated: 7 kg • Upper Arm: 435 mm • Forearm: 470 mm • Maximum Reach Radius: 908 mm • J1: −240° to +240° • J2: −110° to +130° • J3: 0° to +162° • J4: −200° to +200° Ijdpfx Aaox Enknjljhw • J5: −120° to +120° • J6: −360° to +360° • J1: 288 deg/sec • J2: 321 deg/sec • J3: 360 deg/sec • J4: 337 deg/sec • J5: 450 deg/sec • J6: 720 deg/sec • Maximum Composite Speed: 11000 mm/sec • Cycle Time: 0.35 sec • Position Repeatability: ±0.02 mm • Environmental Conditions Ambient Temperature: 0–40°C /Robot Mass: 67 kg • Allowable Torque • J4: 16.2 Nm • J5: 16.2 Nm • J6: 6.86 NmAllowable Inertia • J4: 0.45 kg·m² • J5: 0.45 kg·m² • J6: 0.10 kg·m² • Tool Interfaces Tool Wiring: • 8 inputs / 8 outputs for gripper • Multi-function gripper & sensor signal cable • LAN × 1 (100BASE-TX)Tool Pneumatic Pipes: • Primary: Ø6 × 2 • Secondary: Ø4 × 8Controller Connected Controller Type: CR800-07VD /Control Type: Standalone

Condition: ready for operation (used), Year of construction: 2019, overall weight: 1,090 kg, arm reach: 2,655 mm, number of axes: 6, This 6-axis FANUC R-2000iC 165F robot arm was manufactured in 2019. It features a maximum reach of 2655 mm and can handle wrist weights up to 165 kg. The robot's footprint is 771 x 610 mm, and it operates on a 380-575V, 3-phase electrical system. Consider the opportunity to buy this FANUC R-2000iC 165F robot arm. Contact us for more information about this machine. • Repeatability: 0.05 mm • Max. wrist load: 165 kg • Robot footprint: 771 x 610 mm • Electrical supply: 380–575 V, 3-phase; 50/60 Hz • Average power: 2.5 kW • Integrated upper arm signals (In/Out, stop signals): 8/8 • Integrated air supply: 2 • Sound power level: 70.5 dB • Ambient temperature: not specified • Protection rating (mechanical, standard/optional): IP54 / IP56 • Protection rating (wrist & A3 arm, standard/optional): IP67 Ijdpfx Ajx D Eb Soaljhw Additional equipment • Hose assembly (dress pack): transports electricity, air, or water from axis 1 to axis 6

Condition: ready for operation (used), Year of construction: 2013, load capacity: 13 kg, controller manufacturer: MITSUBISHI, number of axes: 6, This 6-axis Mitsubishi RV-13FLM D1 S15 robot arm was manufactured in 2013, featuring a comprehensive operating range with base rotation of ±240° and wrist roll of ±360°. It's equipped with powerful motors, including 1500 W for both the base and shoulder. If you are looking to get high quality robotic arm capabilities consider the Mitsubishi RV-13FLM D1 S15 machine we have for sale. Contact us for more information. Axis Operating Range: • J1 (Base Rotation): ±240° (Total 480°) Iedpfxjx D H Nks Aalshw • J2 (Shoulder): -150° to +90° (Total 240°) • J3 (Elbow): -72.5° to +95° (Total 167.5°) • J4 (Wrist Yaw): ±200° (Total 400°) • J5 (Wrist Pitch): ±120° (Total 240°) • J6 (Wrist Roll): ±360° (Total 720°)Axis Power: • J1 (Base): 1500 W • J2 (Shoulder): 1500 W • J3 (Elbow): 750 W • J4 (Wrist Yaw): 400 W • J5 (Wrist Pitch): 200 W • J6 (Wrist Roll): 100 W

Condition: ready for operation (used), Year of construction: 2019, number of axes: 6, This 6-axis COMAU Smart NJ 40-2.5 was manufactured in 2019. It features a robust design with a comprehensive set of accessories, including a tool master and connection cables for seamless integration. If you are looking to get high-quality automation capabilities, consider the COMAU Smart NJ 40-2.5 robot arm we have for sale. Contact us for further details. • Description Qty Part Number: • RobotArm NJ 40-25 (Silver - Rel. 2.0): 1 CR82381400_9006ARM • Cover for robot distribution panel: 1 CR82341604 • DVD with system documentation: 1 CR17930160 • Kit connection cables RobotArm (size M&H) to Siemens RunMyRobot [L = 5m]: 1 CR18947980 • RAS-KC3 Cabling package for Siemens RunMyRobot (RobotArm size M&H): 1 CR17530168 • Set for manual mastering NJ robot family: 1 82314100 • Set for manual mastering NJ-40 NJ-60 [axis 5-6]: 1 82212400 • Screws and pins group for robot floor fastening: 1 CR82362500 • Tool Master (117mm): 1 81783801 Ihedsynhnqjpfx Aalsw • Standard Warranty: 1 SWUMP4

Condition: ready for operation (used), Year of construction: 2015, overall weight: 180 kg, load capacity: 200 kg, arm reach: 3,420 mm, number of axes: 6, This 6-axis Kawasaki E42F-A001 was manufactured in 2015. It features a payload capacity of 200 kg, a horizontal reach of 2,597 mm, and a vertical reach of 3,420 mm. If you are looking to get high-quality robotic capabilities, consider the Kawasaki E42F-A001 robot arm we have for sale. Contact us for further details. • Units available: 2 • Payload: 200 kg Isdpfxeyrq T Dj Aalshw • Horizontal reach: 2,597 mm • Vertical reach: 3,420 mm • Repeatability: ±0.2 mm • Maximum linear speed: 5,000 mm/s

Condition: ready for operation (used), Year of construction: 2019, overall weight: 5,000 kg, number of axes: 6, This 6-axis ABB Schweißroboter Flex Arc was manufactured in 2019. It features a robust IRB 1660ID-6/1.55 robot type and a positioner with a payload capacity of 250 kg. The machine operates at a power consumption of 22 kVA and includes advanced safety features such as a vertical light curtain and integrated safety PLC. If you are looking to get high-quality welding capabilities, consider the ABB Schweißroboter Flex Arc robot arm we have for sale. Contact us for further details. • Supply voltage: 400 V • Phases: 3 Ph • Frequency: 50 Hz • Power consumption: 22 kVA • Duty cycle: 100% • Pre-fuse max: 3x63 A • Control voltage: 24 V • Air pressure: 6 bar Additional equipment • Robot: IRB 1660ID-6/1.55 (quantity: 1) • Robot pedestal: 1,000 mm • Robot additional options: PC Interface • Controller: IRC5 Single • Controller voltage: 3x400 V • Controller frequency: 50–60 Hz • Controller rated current: 7 A • Controller short-circuit rating: 10 kA • Controller net weight: 150 kg • Positioner: B-500 • Payload: 250 kg (according to IRBP product specification) • Diameter: 1,000 mm (note: conflicting source text “1.000mg 500kg”) • PLC: Without PLC (integrated safety via safety PLC Pilz) • Loading area safety: Vertical light curtain • Safety PLC: Pilz • Operator detection: Pre-Reset • Service door lock: Euchner HASP • Service window: 1x with Euchner handle • Power source: Fronius TPS 4001, water cooled for ID • Communication: DeviceNet • Torch package: Fronius MTB 500i, water cooled for ID • Wire feed accessories: Lid attachment, Esab liner 4.5 m • Torch service center: ABB TSC • Wire cutter: Yes • SmarTac: Wire • Regula EWR: Mechanical • Pneumatical board: SMC 500 VP544 GCE Flow • Hoses to fixtures: 1x air • Fencing: C, R, B-250 • Fumehood: B250, 8500, B750 Welding • UV window: 1x • Lighting: Welding area switch • Software: Jahreslizenz RobotStudio CAD Konverter STEP Ihedeypb Eljpfx Aaljw • Accessory: Fronius welding system with welding wire feed attached to the system

Condition: ready for operation (used), Year of construction: 2009, operating hours: 13,750 h, This ABB Roboter IRB 4400 was manufactured in 2009. It includes an IRC5 controller, a control panel, and a comprehensive set of documentation. Accessories feature an additional cable set and a Flex pendant. Ideal for automation tasks requiring precision and reliability. Contact us for more information about this machine. • IRC5 controller Ihsdpfx Aasx Hblbslew • Control panel • Cable set • Folder with documentation, circuit diagrams, etc. Additional equipment • Flex pendant

Condition: ready for operation (used), Year of construction: 2023, overall weight: 1,200 kg, total width: 2,500 mm, total height: 2,200 mm, product length (max.): 2,300 mm, number of axes: 6, This 6 axes MEI robot arm was manufactured in 2023. This system was manufactured for a project in the automotive industry. It features a total installed power of 26 kW and operates at a maximum peak air flow of 62.5 liters/min. The machine is equipped with a main control cabinet and various pneumatic components from SMC. If you are looking to get high-quality automation capabilities, consider the MEI robot arm we have for sale. Contact us for further details. • Total installed power: 26 kW • Supply voltage: 400 V AC • Frequency: 50 Hz • Control voltage: 24 V DC • Working voltage: 24 V DC / 220 V AC • Operating pressure: 7 bar • Air consumption per cycle: 5.75 liters (NRA) • Maximum peak air flow: 62.5 liters/min (ANR) • Main control cabinet with PLC • Safety controller • Power supply units • Circuit breakers • Protection switches • Industrial communication switch • Main pneumatic manufacturer: SMC • Cylinders: • SMC MGPM32TF-75Z • SMC MGPM32TF-175Z • SMC CD85N16-50-B • SMC LER50EJ-R5CL17 • SMC MXH16-30Z • SMC CDQMB16-30 • SMC MHS3-16D • Magnetic sensors: • SMC D-A93SAPC • SMC D-MP025C • Electronic pressure regulator: SMC ITV1050-ILF2 • Solenoid valves: • SMC JSY3200-5U • SMC JSY3100-5U Ihedpfx Aaeyk Ut Sjlsw • SMC JSY3100R-5U • Mechanical stops: red neoprene M8 (Ref. 507208-M) Additional equipment • Robot: 6-axis industrial articulated robot • Rotary table: TAKTOMAT RTF650-B-6-1SL90 • Gear ratio: 16 • Maximum inertia: 46 kgm²

Condition: ready for operation (used), Year of construction: 2007, This 6-axis KUKA KR 100-2 HA 2000 was manufactured in 2007. It features a TRUMPF TruDisk 6002 laser with a power range of 120–6000 W and a wavelength of 1030 nm. The robot arm is mounted on a KSL-2000/2700 linear axis, enhancing its operational flexibility. If you are looking to get high-quality welding capabilities, consider the KUKA KR 100-2 HA 2000 machine we have for sale. Contact us for more information about this machine. Machine Benefits Technical Machine Benefits Ihedpfx Aasx D Np Hslsw • Weight (kg): 1202 • Laser power on the workpiece: 6000 w / typical power stability at nominal power: ±1% with active power control / continuously adjustable power range: 120 to 6000 w / beam quality at the input coupling in the llk: 8 mm / numerical aperture at the output coupling after the llk: 0. 1 / wavelength: 1030 nm / minimum diameter of the laser light cables: 200 µm / maximum number of laser light cables: 2 / maximum number of laser light cables with extended device size: 4 / ambient temperature: 10–50 °c • Mounted on ksl-2000/2700 linear axis (4 meters) / trumpf trudisk 6002 laser/ various inert gas welding machines with control systems

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel distance: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball guide size 20 Payload: 60 kg Maximum speed of ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current consumption: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage Ihsdpfx Aew Uc T Iealsw - Gripper jaws open pneumatically - Unit is mounted on a welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit available under stock number 59700

Condition: good (used), Year of construction: 2013, operating hours: 13,749 h, functionality: fully functional, machine/vehicle number: 627761, overall weight: 1,049 kg, load capacity: 120 kg, arm reach: 2,496 mm, This is a KUKA KR 120 R2500 pro industrial robot with KRC4 controller, year of manufacture 2013. We are also happy to offer you this robot as refurbished! The robot includes the following options: BoardPackage Ijdpfoyud N Rsx Aalshw EthernetKRL LoadDataDetermination Profinet KRC-Nexxt RemoteService SafeOperation UserTech

Condition: refurbished (used), functionality: fully functional, ABB IRB 660 with IRC5 Controller - fully refurbished and with 6 months warranty - delivered into Europe duty paid so no need to worry. Ijdpfeyi Iffsx Aaljhw

Condition: ready for operation (used), Year of construction: 2011, General Data Measurements height 1400 mm Measurements depth 40 mm Ihodpfxox D Ihne Aalow Dimensions Machine Length 1600 mm Main Drive Number of axis 6 This 6-axis Mitsubishi RV-12SL robot arm was manufactured in 2011. It features a 10 kg payload capacity, Ethernet interface, and a pneumatic hand interface for up to 4 valves. The robust stainless steel frame and aluminum mounting plate ensure durability. Ideal for precise measuring and assembly tasks. Contact us for more information about this machine. Application Types Robotics

Condition: ready for operation (used), Year of construction: 2019, operating hours: 344 h, This STAUBLI TX60 robot arm was manufactured in 2016. It is in very good condition, almost like new, with only 344 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI TX60 robot arm. Contact us for more information. Application Types Ihjdpfex D Sfdsx Aalow Robotics

Condition: ready for operation (used), Year of construction: 2016, operating hours: 373 h, This STAUBLI RX160 was manufactured in 2016. It is a robot arm in very good condition, almost like new, with only 373 operating hours. It includes a controller and a handheld control unit. Consider the opportunity to buy this STAUBLI RX160 robot arm. Contact us for more information. Application Types Robotics Ihjdpfex D Sd Hsx Aalsw

Condition: ready for operation (used), Year of construction: 2024, General Data Machine weight 41 kg Control Unit Iodpex D Ezlsfx Aalohw Brand FANUC Main Drive Number of axis 6 This 6-axis FANUC CRX-20iA/L robot arm was manufactured in 2024. It features a maximum load capacity of 20 kg and a reach of 1418 mm. The robot's joints have extensive motion ranges, enhancing its flexibility for complex tasks. If you are looking to get high-quality automation capabilities, consider the FANUC CRX-20iA/L machine we have for sale. Contact us for more information. Application Types Robotics

Condition: used, Year of construction: 2016, operating hours: 9,650 h, We are offering a KUKA KR150 R3100 Ultra KRC4 with 6700 working hours Also, we are offering to overhaul the robot. Iodpsmdrnqsfx Aalshw

Condition: used, Year of construction: 2018, functionality: fully functional, Rated voltage: 220/380 V; Current: 30 A. The vacuum forming machine comes with its own wood cutter/former (see pictures). Ihodexzzupepfx Aalsw

Condition: excellent (used), Year of construction: 2019, operating hours: 7 h, ABB IRB2600+Trackmotion 2.9 meter,complete as new DTC 7 hours 2019 DEVELOPMENT OF GSG ROBOTICS Ihsdpfxsyl Avqo Aalow GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC025338-002 Main Servo Drive Unit , DSQC 617 D6_2E2C2B,20% discount at order more then 1 unit. Ihjdjyl Av Djpfx Aalow DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), ABB DSQC679 IRC5 Teachpendant,20% discount at order more then 1 unit Ihedpfsyl Avkex Aalsw DEVELOPMENT OF GSG ROBOTICS GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: excellent (used), 3HAC029818-001 DSQC663 HV MDU Power unit DEVELOPMENT OF GSG ROBOTICS Iodpfxeyl Avwj Aalshw GSG Robotics GmbH,Founded in 2005 in Gütersloh, GSG Robotics GmbH has been based in Marl since 2015 with a generous service area for robot maintenance and repair. Over the years, we have developed to be a holistic partner in all matters relating to industrial robots and automation technology. We are a full-service provider for the two well-known robot manufacturers ABB and Fanuc.

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: Ihsdpfoyr R Egex Aalew 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: excellent (used), Year of construction: 2018, Cellro Xcelerate X20 (Robot) Control: Fanuc Year of manufacture: 2018 Xcelerate X20 - Frame - Robot: Fanuc M-20 iA 20M - Primary safety circuit (redundant - 2x) - Panel to reduce the safety zone - Signal lamp - Tablet PC - Automatic gripper change - Manual grip force adjustment - I/O module (14 IN / 14 OUT) - Gripper magazine - Internal valve terminal - Remote maintenance modem - Floor scanner - Premium controls - High-quality dialogue control on touch screen - Including robot software options: High Sensitive Collision Detection, Auto Singularity Avoidance, Softfloat - DCS Position / Speed Check Function Drawer module with 3 drawers - Driven by spindle motors - Drawer size: 1200 mm x 600 mm (W x D) Ihsdjylv Tijpfx Aalow - Max. workpiece height: 165 mm - Max. load per drawer: 200 kg 3 Standard product inlays - Product dimensions: 0 mm to 160 mm Transfer and centering module - Module for flipping and centering workpieces Interchangeable 3-point double gripper (standard) - incl. blow-off function – for cleaning the clamping device Interchangeable 3-point double gripper (standard) Interchangeable 2-point double gripper Quick-change system for gripper fingers - Additional module allowing fast finger changes Universal short finger set X20 (2x) - Workpiece dimensions: 1-160 mm Z=35 mm

Condition: good (used), Year of construction: 2000, Robot is fully functional. Iedpsyrzbrofx Aalehw