Robot cross table

Berger Lahr x/y/z 670/360/1260 mm

Condition: as good as new (ex-display), Year of construction: 2025, Max Ø 114mm; Straight and bent round tubes; One grinding station; Grinding of straight and bent round tubes up to Ø114mm with maximum flexibility. The ML100 tube grinding machine is the perfect choice for surface grinding and polishing of round, oval and elliptical tubes. The ML planetary belt system allows belt grinding without rotating the tube to deliver the best results. The feed system safely feeds the straight tubes into the grinding station for a consistent and productive surface finish. ML100 Working capacity (Ø mm) 3 - 114 No. of stations 1 Sanding belt, dimensions (mm) (2x) 50x940 Sanding belt speed (m/s) 3-22 Feed speed (m/s) 1-5 Sanding belts Motor (kW) 3 Wheel, motor (kW) 1.5 Feed motor (kW) (2x) 0.12 Total power (kW) 5 Power consumption (A) 11 Dust extraction connection (Ø mm) 80 Dimensions (mm) 750x1000x1300 Weight (kg) 250 Godpfx Aotzkgbsg Iobt

Condition: as good as new (ex-display), Year of construction: 2024, Capacity: 5.000 kN Specification: Threshold setting: Reading begins at 1% of capacity (50 kN) Resolution: 10 kN Inaccuracy: +/-0.5 % of Full Scale (F.S.) Non-linearity: +/-0.3% F.S. Non-repeatability: +/-0.l% F.S. Temperature Range: 0° C. to 70° C Temperature Effect on F.S. output: +/-0.001% F.S./DEG. F. on no-load output: No effect (has auto- zero balance circuit) Overload: 150% of capacity (7.500 kN) Sampling rate: Three measurements per second Operation mode: Peak or Track Strokes per minute: Single stroke device, automatic reset on each stroke Power: Standard 9V alkaline battery Approx. 30 hours of continuous use Has low battery indicator Tons Display: 3 1/2 digit LED (0.56" high) Dimensions: app. 230 L x 190 W mm, height app. 180mm Height sets to 7.0000" +/- 0.0005" Weight: app. 32 kg inckuding carrying box Gsdjfpwk Rjpfx Ag Iobt with analog output

Condition: new, Cutting range: round 0°: 270 mm square 0°: 260 x 260 mm flat 0°: 320 x 260 mm round 45° R: 230 mm square 45° R: 220 x 220 mm flat 45° R: 230 x 150 mm round 60° R: 140 mm square 60° R: 140 x 140 mm round 45° L: 200 mm square 45° L: 175 x 175 mm flat 45° L: 220 x 150 mm Cutting speed: 40 / 80 m/min Saw band: 2925 x 27 x 0.9 mm Working height: 975 mm Coolant pump: 100 W Saw motor: 1.9 kW Voltage: 400 V Dimensions L x W x H, approx.: 2000 x 1300 x 2000 mm Weight, approx.: 550 kg Features: - Double miter saw with pivoting saw arm from -45° on the left to +60° on the right - Ideal for cutting tubes, profile materials and solid materials made of stainless steel, iron, etc. in commercial applications - Generously sized saw arm made of cast iron for vibration-free operation - With 2 saw band speeds for optimal adjustment to the workpiece - Hydraulic lowering cylinder - Quick-release vise for easy and fast workpiece clamping - Precise, adjustable saw band guide for optimal cutting results - CE/IEC, German documentation and German service Scope of supply: - Bi-metal saw band 2925 x 27 x 0.9 mm - Band tension adjustable via manometer - Carbide guides - Quick-release vise - Material stop - Coolant system with pump - Hydraulic lowering cylinder - Motor protection switch Gjdpfx Aoiqt Rlog Iobt - Automatic shutdown after cutting is complete - Base frame

Condition: excellent (used), Year of construction: 2009, Hwacheon Cutex 160, Year 2009 CNC Control Fanuc OT i 12-station turret LNS bar feeder (max. bar diameter 42 mm) Tool package (including driven tool holders) Chip conveyor Gbjdpoyc Nrysfx Ag Ijt Tailstock Technical data: Swing diameter over bed: 550 mm Max. turning diameter: 300 mm Max. turning length: 300 mm X-axis travel: 170 mm Z-axis travel: 335 mm C-axis Max. bar capacity: 45 mm Spindle speed: 6000 rpm Turret: 12 stations Rapid traverse X: 36 m/min Rapid traverse Z: 36 m/min Drive power: 20 kW Machine weight approx.: 3200 kg

Condition: new, Year of construction: 2025, functionality: fully functional, For sale is a new ABB IRB 6700-150/3.20 >>ORIGINAL PACKAGING, YEAR OF MANUFACTURE 2025 Manipulator: 435-114 Variant: IRB 6700-150/3.20 209-202 Manipulator color: ABB Graphite White standard 287-4 Version: Standard version 334-1 ABB logo on manipulator: With ABB logo 1999-1 Standard calibration method: Axis Calibration Base: 700-3 Controller model IRC5: Single Cabinet Controller IRC5 129-1 Electromagnetic compatibility (EMC): Prepared for CE marking 769-2 Supply voltage: 400V supply voltage 752-2 Power connection: Power connection via HAN HSB 6p+E plug 742-1 Main switch: Main rotary switch Gsdpfxsyr R Egs Ag Isbt 708-1 Control cabinet ambient temperature: Control cabinet ambient temperature up to max. 45°C 741-1 Plug field cover: Plug field cover for one field 438-1 Warranty period: Warranty period after delivery 18 months (partner)/12 months (end customer) Floor cables: 210-2 Manipulator cable: 7 m manipulator cable 16-1 Customer signal interface: Customer signal interface connected to control cabinet 94-1 Customer signal cable: 7m customer signal cable 859-1 Customer signal cable, ProfiNet: 7m customer signal cable, ProfiNet Control unit: 701-1 FlexPendant: FlexPendant with 10m connection cable 888-2 Profinet I/O: ProfiNet I/O Master/Slave software 941-1 Ethernet switch: Ethernet switch 1541-1 Base Dig. 16In/16Out: Base module Digital IO 16 In / 16 Out 1550-1 Conv.Tracking unit Int.: Conveyor Tracking unit Int. 1 727-1 Power supply 24V: Power supply 24V, 8A 731-1 Safety signals: Safety signals internal 996-1 Safety Module: Safety Module 997-1 Safety Network: PROFIsafe F-Device 1125-2 Safety Robot Supervision: SafeMove Pro 733-1 Operators panel: Operator panel on control cabinet 735-2 Operating mode selector switch: Operating mode selector switch with 2 positions for drive units 736-1 Service socket: Service socket 230V ROBOTWARE: 685-2 Robotware Version: Operating system RobotWare 6 606-1 Conveyor Tracking: Software option Conveyor Tracking 608-1 World Zones: Software option World Zones 611-1 Path Recovery: Software option Path Recovery 613-1 Collision Detection: Software option Collision Detection 623-1 Multitasking: Software option Multitasking Process: 455-8 Application signals: Parallel and Ethernet 778-1 DressPack process configuration: for material handling 798-3 DressPack variant: Base to axis 3 458-1 Mating connector set for user signals on axis 1 to 3 incl. BUS (CP/CS/BUS): Mating connector set for user signals on axis 3 incl. BUS (CP/CS/BUS) GENERAL: 448-2 Delivery project: Expanded Offer

Condition: refurbished (used), Year of construction: 2019, General overhauled fully automatic indexing rotary table with 6 work spindles and 4 polishing stations, each with 5.5 KW inverter drive power, all polishing stations with two-axis motorized wheel feed and lift, new control cabinet with Siemens PLC control, HMI and LED control panel, CE conformity possible, HMI in English possible Gedpfsipqwljx Ag Ijbt

Condition: new, 4th axis incl. control for: Milling, grinding, testing/measuring; engraving IDEAL also for "machines in training" Technical data: Center height: 110 mm Spindle nose: HSK 63 taper, outer ø 70 mm 0/-0.005 mm Clamping torque: 250 Nm Concentricity and axial run-out: 0.006 (optional: 0.003 mm or 0.002 mm) Max. transport load: (limited by motor) without support: 40 kg (only if turntable is bolted down) with support: 80 kg Total weight, approx.: 25 kg Version: - Stepper motor - motor-dependent, backlash-free toothed belt drive including correct pre-tensioning - With automatic spindle clamping with 6 bar compressed air - Fully sealed to IP 67 - Sensor system with LEDs, data logger and microprocessor, e.g. for status monitoring and display - Service display - Data history for root cause analysis - Remote diagnosis - Axis signals 'Limit+ / Limit -' (e.g. for swivel axis) - Data output via USB slot - Alignment sliding blocks 14h6, 1 pair - Alignment sliding blocks 18h6, 1 pair Cable set 3m: - All cables and hoses routed in quality protective conduit - Pre-assembled, all cables shielded in accordance with regulations, incl. matching plugs Accessories / options: - ControlTablet - quality tablet with Mutlitouch, Windows 11Pro; software pre-installed - QuickControl software - "professional" range of functions; smallest display unit-0.0001°; 2 outputs, 6 inputs - QuickConnect - Direct cable connection to the machine control unit Gedpferxcu Sox Ag Isbt

Year of construction: 2005, condition: used, most probably unused part -No: RC 08 05 4402 P_nominal: 75kVA_ 20%ED Prim.: 500V Gbsdpfjdq E Hxex Ag Ijt F=1000Hz Sec.: 8,4V Sec. short circuit current: 23,7kA 86kg

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Gjdpfx Ajw S Udyog Iebt

Condition: ready for operation (used), Year of construction: 2018, Three identical Franka Robotics robots are available. Axes: 7, max. payload: 3kg, max. reach: 855mm, repeatability: +/-0.1mm, max. acceleration: 15m/s², weight: approx. 25kg. Documentation available. An on-site inspection is possible. Gbsdoxqqm Hopfx Ag Ist