Condition: like new (used), Year of construction: 2020, Markforged Type: X7 Gen 2 3D printer The X7 prints industrial-grade fixtures, jigs, tools, and end-use parts. Designed for production environments, it prints parts that are stronger than machined aluminum, at a fraction of the cost. It combines superior surface quality, build volume, and reliability. Accelerate production with Turbo Print and verify dimensional accuracy with the adaptive manufacturing technology Blacksmith, which is only available on the X7. Technical specifications: Printer features Process: Fused Filament Fabrication, Continuous Fiber Reinforcement Build volume: 330 x 270 x 200 mm (13 x 10.6 x 7.9 in) Weight: 48 kg (106 lbs) Footprint: 584 x 483 x 914 mm (23 x 19 x 36 in) Print bed: Kinematic coupling - level to within 80 μm accuracy Laser: In-process control, active print calibration, bed leveling Extrusion system: 2nd generation extruder, out-of-plastic and out-of-fiber detection Power supply: 100–240 VAC, 150 W (2 A peak) RF module: Frequency range 2.4 GHz Wi-Fi standards 802.11 b/g/n Materials Available plastics: Onyx, Onyx FR, Onyx ESD, Nylon White, P-PLA, S-TPU 95A Available fibers: Carbon fiber, Carbon fiber FR, Fiberglass, Aramid fiber (Kevlar®), HSHT Fiberglass Tensile strength: 800 MPa (25.8x ABS, 2.6x 6061-T6 Aluminum) * Tensile modulus: 60 GPa (26.9x ABS, 0.87x 6061-T6 Aluminum) * Part properties Layer height: 100 μm standard, 50 μm minimum, 250 μm maximum Infill: closed-cell infill: several geometries available Software Eiger Cloud: Slicing, part and build job management (additional options available at extra cost) Security: 2-factor authentication, org-admin access, single sign-on Blacksmith: Adaptive manufacturing platform (additional purchase required) Year of manufacture: 2020 last maintenance in December 2024 Sale from current location Condition: used Scope of supply: (See pictures) one roll each of Kevlar, fiberglass and carbon fiber, 11 partially used rolls of Onyx filament (Subject to change and errors in the technical data, specifications are subject to change!) Hfedpfx Apjzh Dqmsnsi We will be happy to answer any further questions you may have by telephone.

Condition: used, Concept Laser M2 cusing Multilaser: System technology for the safe processing of aluminum and titanium alloys, etc. External dimensions: 2542 x 1818 x 1987 mm (W x D x H) Weight: 2300 kg 2 lasers, 400W each Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Protective gas possible via 2 connections for external N2 generators (optional) Build volume: 250 x 250 x 280 Layer thickness: 20-80 μm Manufacturing speed: 2-20 cm³ (depending on material and laser power) Operating conditions: 15-35 degrees Celsius Laser usage duration: Laser 1: 501 hours Laser 2: 503 hours Additional equipment: Inox 200 lifting device Weight: 102 kg Max. lifting capacity: 135 kg Protection class: IP65 Wet cutting unit NA 7-11 H CL EU Zone 22 Dimensions: 800 x 480-570 x 755-850 mm Drive type: AC Power: 1.25 kW Voltage: 230 V 9.2 A Protection type: IP65 Frequency: 50 Hz Housing: Steel sheet Airflow: 130 m³/h Continuous negative pressure: -145 mbar Short-term negative pressure: -235 mbar Liquid volume: 7 l Water consumption: 0.26 l/h Weight: 50 kg QM powder automatic sieving station Power supply: 3/N/PE AC 400 V +/- 10% 50/60 Hz Max. current consumption: 3A / phase Inert gas: 5 bar Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have over the phone. Hsdpfx Aszh Dp Nepnjfi

Condition: excellent (used), Selective DMG Mori Type: LASERTEC 30 SLM Selective Laser Melting Machine Technical Specifications: Build volume: 300 x 300 x 300 mm Layer thickness: 20-100 µm Materials: Tool steel, stainless steel, cobalt-chrome alloys, titanium, aluminum, precious metal alloys, Inconel Laser: Ytterbium fiber laser Laser type: YLR-600-WC Dimensions: 448 x 580 x 132 mm Weight: 40 kg Cooling: Water Central wavelength range: 1070 ±10 nm Modulation frequency: 0-50 kHz Hjdpjzh Dp Ajfx Apnofi Average power, max. 600 W Power adjustability: 10-100% Beam parameter: 0.37 mm x mrad Condition: used Scope of delivery: (See picture) (Subject to change and error in technical specifications and details!) We are happy to answer further questions by phone.

Condition: excellent (used), Eos Type: EOS M270 Metal Laser Sintering System Laser sintering system 200 Watt Yb fiber laser Material processed with the system: Tungsten Laser hours: 8018 Usable build volume: 250 mm x 250 mm x 215 mm (including build platform) Layer thickness: 20 μm or 40 μm Precision optics: F-Theta lens, high-speed scanner The system has been upgraded to Scanlab hurrySCAN 30 for a more accurate print result. Focus diameter: 100 μm Dimensions (W x D x H) system: 2,000 mm x 1,050 mm x 1,940 mm Weight approx. 1,130 kg For further technical information, please refer to the manufacturer. Scope of delivery: Eos M270, cooler and software Hjdpfozh Dn Eex Apnsfi Condition: used (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by telephone.

Condition: used, Year of construction: 2019, Used machine Year of manufacture 2019 Print bed format of 2500 x 1300 mm High speed: Prints up to 25 m²/h or up to eight sheets/h (4C color configuration) in the format 2440 x 1220 mm and up to approx. 12.5 m²/h (4C+W color configuration) with simultaneous white printing New ink supply: The 1-liter ink bottles can be easily replaced from the front – making refilling much faster! Simple operation – no alignment problems: Equipped with alignment pins and a printed scale for precise positioning of the media on the printing table. The registration pins secure the media against shifting. Thanks to the measuring scale, the layout and RIP data can be easily adapted to the position. More flexibility through direct printing on thick media: Printing on boards up to a height of 50 mm. Reduced banding thanks to the Mimaki Advance Pass System. Special Mimaki circulation system prevents white ink from settling. Mimaki Clear Control (MCC): For glossy surfaces – to avoid dust adhesion and the formation of small air bubbles, MCC simultaneously reduces the drying time of the ink and the radiation of the UV light. This creates both glossy and stylish, matte surfaces. In addition, multiple layers of clear varnish can be used to create a high-quality, embossed effect for a multi-dimensional look. Convenient ink selection: - LH-100 hard UV inks for all smooth surfaces with high scratch resistance, color brilliance and solvent resistance - LUS-150 flexible UV inks for smooth and uneven surfaces, approx. 150% deformable and therefore suitable for a wide range of substrates - white ink to reduce light transmission in images - two-layer printing with white on clear and colored surfaces - refinement of prints with a glossy or matte varnish finish Environmentally friendly printing: No release of harmful substances through UV printing technology. Lower power consumption and longer service life thanks to UV LED lamps RasterLink 6 - powerful RIP supports excellent color reproduction - various print jobs can be easily nested together - simple and user-friendly application - self-explanatory icons help you find your way around quickly - thematically related RIP settings are grouped together in a window and can be saved as favorites for repeated use - the printing process is monitored directly in the main window - the software can be updated to the latest version via the Internet at any time, and profiles can be downloaded or updated. Printing process: Piezo Inkjet Print head: 2 heads in staggered arrangement Max. printing format (W x L): 2500 × 1300 mm Max. media format (W x L): 2500 × 1300 mm Max. media thickness: 50 mm Max. media weight: 50 kg with even weight distribution Print resolutions: 300, 450, 600, 900, 1200 dpi Media feed by vacuum Number of vacuum zones: 2 sections (in the X-axis) Hfodpfxjzlbtao Apnsi Accuracy: Absolute ± 0.3 mm or ± 0.3% of the specified distance (whichever is greater) Repeatability: ±0.2 mm or ±0.1% of the specified distance (whichever is greater) Drying: UV LED technology (service life*² over 5000 h) (Ref...

Condition: used, Used machine In all operating processes, materials are fed from the front side through the roller gap and bonded together by pressure. Standard number of axes: Material unwinding: 2 Silicone paper unwinding: 1 Roller gap adjustment: 0 - 52 mm Pressure: 0.3 - 0.8 N/mm Processing speed: Maximum: 5 m/min Slow operation: 0.6 m/min Reverse operation: 0.6 m/min Noise level: > 70 dB(A) Material data: Max. width: 1400 mm Max. material diameter: Material unwinding: 200 mm Silicone paper rewinding: 150 mm Max. sheet thickness: 50 mm Hedpfszlbr Nsx Apnefi Core inner diameter: 76.2 mm Power supply: 230 V Availability: short notice Location: Röllbach

Year of construction: 2017, condition: used, Used machine Year of manufacture: 2017 Features and technical data: - Automatic cutting plotter with suction zones on the working surface - Automatic cutting table with automatic detection of print images and reference points - The working surface consists of 40 individual vacuum zones that are automatically activated as needed - Multi-tool cutting head for cutting, creasing, and routing materials up to 50 mm thick - Multi-batch cutting capability for processing different substrates simultaneously - Automatic tool presetting - Video projection system for optimizing material yield - Cutting speed up to 102 m/min, acceleration 1.4 G - Automatic height detection of substrates - Working area: 3100 x 2000 mm Hfodpfozlbqlox Apnsi - Suction zones in working area: 40 - Cutting speed up to 102 m/min Tooling program: - Creasing tool, oscillating knife, router - Elitron CAD & CUT (software) Elipack Availability: Short-term Location: 63934 Röllbach

Condition: like new (used), functionality: fully functional, Cyklos GMP 450 Ril machine in excellent condition with a foot pedal! Hedpfx Aszgf H Hopnefi All of the equipment mentioned is not for sale/resale in Russia, or any country that is subject to an EU embargo.

Year of construction: 2023, condition: as good as new (ex-display), Feeder Media width min. 100 mm max. 216 mm Page size min. 76.2 mm max. 254 mm * Max. 1200 mm in sequential mode Media diameter max. 254 mm Core max. 76 mm Media weight max. 10 kg Laminator Media width Min. 80 mm Max. 195 mm Media size max. length 200 m or 210 mm Outer diameter Inner diameter max. 76 mm Max. outer media diameter: 200 mm max. inside: 25.4 mm Media weight max. 8 kg Cutter System gate cut with cutting plotter Motor Digital servo motor Cutting force 20 - 300 gf in 31 steps Max. Cutting area No R. mark: 203 mm x 300 mm R. mark: 186 mm x 1200 mm Max. Cutting speed 600 mm / s General data Max. Media diameter separating unit 220 mm Core: 25.4 mm Number of slitters 3 Interface USB2.0 (High Speed) Network (Ethernet 10BASE-T / 10BASE-TX) Display LCD with 128 x 64 pt Power source AC100-120V, AC200-240V 50/60Hz (automatic change) Max. Power consumption 170 VA Operating conditions 10 - 35°C / 35-75% relative humidity (non-condensing) Hfsdst D E Aijpfx Apnji Operating conditions for guaranteed accuracy 16 - 35°C / 35-70% relative room humidity (non-condensing) Dimensions (WxHxD) approx. 1904 mm x 994 mm x 1297 mm Weight approx. 151 kg

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, counter reading (black): 45,237, counter reading (color): 499,970, Sharp MX-7090 printer with Fiery. FULLY LOADED, With all add ons and options. In very good condition and working order. See photo for machine count. Has been disconnected and dismantled and placed into storage. Machine has been on a service contract with regular servicing. A video can be sent on request. Configuration is as follows: Paper Trays: Large capacity tray Hfedpfx Apjzd Huysnsi MX-LC13N RRP £9,995 Plus VAT. Fiery server MX-PE13 Manual Feeder MX-MF11 RRP £1,095 Plus VAT Finisher FN-21 RRP £3,495 Cover Inserter Module CF11 RRP £2,995 Folder Unit FD-10 £7,495 GBC Smart Punch Pro BM50 Booklet maker + Edge Trimmer RRP £16,695

Condition: used, Spindelpresse / Spindle Press Tränklein SP Hjdpfx Aozl Th Ajpnjfi Spindle Press Tränklein SP Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Condition: used, operating hours: 1,100 h, functionality: fully functional, machine/vehicle number: T28, input voltage: 400 V, input current: 16 A, input frequency: 50 Hz, Hello, we are offering a small UV dryer here for drying screen printing and pad printing inks. This compact, mobile dryer is equipped with two mercury UV lamps, making it suitable for common printing inks and coatings. The conveyor belt has adjustable speed and a width of 300 mm. Lamp 1 has 1077 operating hours, and lamp 2 has 682 operating hours. The two lamps can be used individually or together. The base frame is included. However, the dryer can also be easily placed on a table, etc. The rolling base frame was very convenient... and it made the dryer very easy to move around. Power connection: high-voltage, 400V/16A plug. Hfedpszll Rpsfx Apnsi If you have any questions, please feel free to write to us, and we will be happy to help.

Condition: used, functionality: fully functional, machine/vehicle number: 050526, input voltage: 230 V, overall weight: 40 kg, Hello, we are offering a nice, small Roku Print SD 05 for sale. The system is in top condition and has only been used very little for prototype production. This small system features a vacuum printing table. The height of the printing material can be adjusted using the small hand control unit. Hedpfezll N Sjx Apnjfi All the important parameters, such as printing speeds, flood speed, screen clamping, etc., can be easily entered via the hand control unit. In addition, the system is equipped with an adjustable printing table in the x and y directions, which can also be rotated. This is not a standard feature, but rather a special design with table adjustment. The system is a good alternative for those who need to print small parts and for whom Thieme and ATMA screen printing systems are too large. It is an ideal machine for "small parts printing". The machine requires a standard 230-volt connection and compressed air. If you are interested, we would be happy to demonstrate the system. Please feel free to contact us if you have any questions.

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand textile printer/large-format printer, the “Epson SureColor SC-F2100” Item for sale: 1 x Epson SureColor SC-F2100 Hfedpezh Dcvsfx Apnji Meter readings: Total: Approx. 66,000 prints Condition: This listing is for a second-hand device, which may show signs of wear (minor scratches or discolouration). The device has been tested to ensure it is in working order. A test print can be seen in the photo. Packaging and dispatch: You are welcome to view the device during our business hours. Please arrange an appointment to do so! Seaworthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, you are of course welcome to contact us directly.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, Very well-maintained machine. Only 130,000 cuts. Hfjdpfozlr Nxjx Apnei

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: 2NT01193, total length: 1,800 mm, total width: 1,000 mm, total height: 1,200 mm, input voltage: 220 V, product width (max.): 330 mm, Equipment: documentation/manual, double-sided, Canon imagePRESS'es C710, C650 and C910 – a reliable and high-performance digital production presses ideal for commercial print shops, in-house print rooms, and professional graphic environments. Features Outstanding image quality Handles a wide range of media types and weights Suitable for brochures, flyers, booklets, marketing materials, and short-run production User-friendly touchscreen interface Condition Fully operational and well maintained, in excellent condition. The machines always serviced by Canon engineer with genuine parts, service history available if required Paper trays standard: 3 x sheet cassettes, Stack Bypass-C1: Multi-purpose tray/ for Long sheet) POD Deck Lite D: (A4/ A3/SRA3) Fiery Print Controller on board x 1 Prisma Sync x 2 Paper Size Length: 148 mm – 487.7 mm Width: 98.4 mm – 330.2 mm Up to 350gsm Duplex Colour Image Scanner with automatic document feeder Power Source 220-240 V Measurements Hodpfx Asurbwxopnsfi Height 120. With touch control panel 145 Width 180 Depth 100 Machines always serviced by Canon. Discount offered if all 3 machines are bought. Available for inspection OPEN TO OFFERS

Condition: good (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: 6972372, PAPER STACKER LIFT Hfedpfx Aey T Rhropnoi

Condition: good (used), Year of construction: 1999, operating hours: 6,972,373 h, functionality: fully functional, PAPER STACKER LIFT Hfjdpfx Apey T Rh Ssnsi

Condition: defective spare-parts repository (used), SLM Solutions Type: SLM 280 HL For sale is a professional metal 3D printing system, type SLM 280 2.0, from SLM Solutions (Lübeck). The SLM is designed for 24/7 operation and was last used with titanium. Installation was in 2018. The system already has the sintering walls for gas flow. The system has been running on argon for the last 3 years. Approx. 50,000 laser hours. The 50,000 hours refer to the laser-on time; the exposure time is not recorded in the older 280 models. If I disregard the coating time, I estimate approximately 10,000 active laser hours. Last maintenance was at the beginning of 2026. Currently, occasional communication issues between the PC and the PLC are observed. In rare cases, this can lead to incorrect status messages, which can cause the system to be briefly interrupted during an ongoing job. Technical data (excerpt) Single laser 400W Weight: 1,245 kg Build volume: 280 × 280 × 365 mm Laser: 1 × 400 W fiber laser (IPG) Optics: 3D galvo system Focus diameter: 80 – 115 µm Max. scanning speed: up to 10 m/s Layer thickness: 20 – 90 µm Minimum feature size: approx. 150 µm Build speed: up to approx. 113 cm³/h (material-dependent) Materials: Stainless steel, tool steel, titanium (Ti64), aluminum, Inconel, CoCr Inert gas: Argon Gas consumption process: approx. 2.5 – 8 l/min Gas consumption purging: approx. 70 – 110 l/min Compressed air: approx. 6 – 7 bar Electrical: 400 V, 3P+N+PE Fuse: 63 A Power consumption: approx. 3.5 – 5.5 kW Machine dimensions: approx. 2600 × 1200 × 2700 mm Weight: approx. 1300 kg (empty), up to approx. 1800 kg (including powder) Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of supply: (See picture) SLM 280 machine Control cabinet Process chamber Internal operating panel with screen (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone. Hfodpfxozhlr Eo Apnei

Condition: used, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Hjdpozkh Riofx Apnsfi Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: used, Rotary Trimming Line Gammerler RS 114/530 consisting of 2 rotary trimmers RS 114/530 and 1 bump-turn Gammerler EM 120 with infeed jogger segmented knives Technical Data: Width untrimmed: min. 120 x 120 mm - max. 530 x 530 mm Width trimmed: 2-pages min. 117 x 117 mm max. 527 x 527 mm 1-page min. 110 mm Section width: min 0,5 mm – max 45 mm Cut Depth: 8 mm Max. flow rate: 80 m/min. Bcrjx0gm7f Cutting system: stream or single cut Product: sheet fed and offset printing Weight: approx. 670 kg /each Further Gammerler components on request. Hsdpfxjui U Ixj Apnofi Machine type: Rotary Trimming Line

Condition: excellent (used), RICOH PRO C9110 (speed of 135 pages per minute) In good working order, Ricoh France service contract included. Color page counter: 6,700,000 Black and white page counter: 900,000 Hedjziytyjpfx Apnjfi AVAILABLE Video of the machine in operation available upon request.

Condition: excellent (used), Year of construction: 1960, machine/vehicle number: 3/60 388, Format (cm): 80 Equipment / Additional information: 1xreserve knife Condition: Very good condition / New controller Hjdpfx Aemb U Rcspnjfi

Condition: like new (used), Year of construction: 2016, For Sale: EOS P 396 – Guaranteed Working Condition This EOS P 396 was purchased from EOS in 2022 by the previous owner and is now available for resale in fully guaranteed working condition. Before the sale, the machine is thoroughly inspected and revised by our experienced technicians to ensure top performance. The package includes: • 2 build frames • Hydac water cooler Additional accessories are available upon request. We offer transport in the original EOS packaging and provide professional installation services to ensure a seamless experience. Warranty and maintenance plans are available to suit your needs. For more information or specific requests, please don’t hesitate to contact us. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we specialize in providing high-quality refurbished EOS SLS machines and unparalleled support. With our team of ex-EOS technicians, we are the only provider in the market offering a complete solution for used EOS equipment—including installation, maintenance, repairs, upgrades, and consumables. What sets us apart: • Guaranteed reliability: Every machine is inspected and revised before delivery. • End-to-end support: From transport and installation to tailored maintenance plans, we’ve got you covered. • Expertise: With years of experience in the SLS industry, we ensure that your machine runs at its best. • Exclusive offerings: Unique materials, accessories, and service plans designed specifically for EOS users. Hedpstp Up Ejfx Apnofi Choose IM3D for unmatched expertise, value, and service. Feel free to reach out to learn more about how we can support your SLS production needs!

Condition: refurbished (used), For Sale: Refurbished EOS M290 – Ready to Use This fully inspected and refurbished EOS M290 is in excellent condition! This setup is ready to use and ideal for expanding or starting a DMLS production line. Specifications: • Technology: DMLS (Direct Metal Laser Sintering) • Material Type: Metal • Compatible Materials: On Request • Build Volume: 250 x 250 x 325 mm • Laser Type: Yb-fiber laser; 1 x 400 W Hfsdpfx Aewmq Dyjpnsi Consumables Featured We offer plug-and-play materials, fully tested and optimized for use with EOS machines. Our exclusive Inframotion PA12 is designed to perform at or above OEM powder levels, while significantly reducing costs. By switching to our materials, you will reduce your production costs without compromising on quality. Included Services: • Transport & Installation: We ensure safe delivery in original EOS packaging and professional installation. • Warranty & Maintenance Plans: Flexible options to fit your needs, for long-term reliability and peace of mind. About Inframotion 3D (IM3D) At Inframotion 3D B.V., we are the market leader in high-quality remanufactured EOS SLS and DMLS machines with comprehensive support services. We are the only provider to offer end-to-end solutions for used EOS equipment, with unmatched expertise and reliability. What we offer: • Expert maintenance: Installation, maintenance, repairs and upgrades performed by experienced ex-EOS technicians. • Exclusive materials: Cost-effective, high-quality consumables such as our plug-and-play PA12, specifically designed for EOS systems. • Unmatched support: From transportation to maintenance plans, we have it all covered. Trust IM3D for top performance, superior materials and the expertise to keep your SLS and DMLS production running smoothly. Please feel free to contact us for more information or questions!