Used press brakes with 150-199t bending force for sale (161)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1997, stroke length: 415 mm, throat depth: 400 mm, pressing force: 150 t, clearance between the columns: 2,600 mm, working range: 3,100 mm, The hydraulic system has been completely overhauled; the cylinders were removed and reconditioned, and seals, oil, and filters were replaced. New light barriers were installed, the CNC control unit was tested, and the machine was repainted. TECHNICAL DETAILS Press force: 150 t Bending length: 3,100 mm Throat depth: 400 mm Distance between uprights: 2,600 mm Stroke: 415 mm Axes: Y1 - Y2 - X - R - Z1 - Z2 MACHINE DETAILS Credpfxjy D Ih Ro Aqvei Control unit: CYBELEC DNC 900 Motor power: 15 kW Dimensions & Weight Overall dimensions (L x W x H): 4,000 x 2,400 x 3,200 mm Machine weight: 12,800 kg EQUIPMENT Hydraulic tool clamping Hydraulic crowning

Condition: new, Condition: New Press force: 175 tons Bending length: 3050 mm Axes: Y1 / Y2 and X axis Control system: Durma Sky 22 Rapid traverse rate Y-axis: 200 mm/s Stroke: 265 mm Distance between uprights: 2600 mm Overhang in the side upright: 450 mm Installation height: 530 mm Drive concept: Servo-hydraulic, up to 72% energy saving Working speed Y-axis: 10 mm/s Retraction speed Y-axis: 500 mm/s Back gauge travel X-axis: 650 mm Back gauge speed X-axis: 500 mm/s Back gauge speed R-axis: 350 mm/s Back gauge travel R-axis: 250 mm Table height: 900 mm Table width: 104 mm Motor power: 15 kW Length: 4250 mm Width: 1700 mm Height: 2890 mm Weight: 10900 kg 3 axes (Y1, Y2, X) CNC CONTROL DT-15 - 2D graphic display 15″ Cedpsh H Dnbefx Aqvori - Intuitive touch screen operation (easy drawing of the bending contour with the finger) - Direct programming of the bending angle - User-friendly programming in dialog mode - Graphical simulation of the bending process - Automatic calculation of the blank length for sheet metal cutting - Graphical product and tool memory - Correction option - Manual, semi-automatic and fully automatic operating mode - Tonnage calculation/programming by the CNC - Internal data storage - USB ports for backup and program transfer Servo-motor driven back gauge on linear guides and ball screws Back gauge finger blocks on double linear guides CNC-controlled crowning Spacers for the upper tool clamping Die holder for 60 mm dies Laser protection device Fiessler AKAS mounted on the upper beam Sheet metal support arms on linear guide Side and rear protective grilles Equipment according to CE regulations Operating manual in GERMAN and ENGLISH (Sample image) Various options and equipment variants are possible.

Condition: ready for operation (used), Year of construction: 2003, operating hours: 57,202 h, controller manufacturer: TRUMPF, stroke length: 365 mm, number of axes: 8, overall weight: 18,000 kg, total height: 3,100 mm, pressing force: 173 t, This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine. Machine Benefits Technical Machine Benefits • Distance between column: 3680 mm • Distance beam - table: 535 mm Extra Information Crodpox D Ilyjfx Aqvsi Machine still under power Technical Specification Bending Length 4080 mm Dimensions Machine Depth 5000 mm

Condition: new, Year of construction: 2025, Delivery ex works Turkey Bending length (A): 3050 mm Press force: 170 tons Sheet thickness 42kgf / mm: 8 mm Sheet thickness 72kgf / mm: 4 mm Upper tool: 1260 Top Tool 85 ° Lower tool: 50, 35, 22, 16 Distance between columns (B): 2550 mm Forward speed: 130 mm / s Working speed: 8 mm / s Retraction speed: 120 mm / s Crowning: manual (CNC-motorized available for an extra charge) X-axis travel: 750 mm X-axis speed: 250 mm / s Backgauge fingers: 2 pieces Front support arms: 2 pieces Oil tank capacity: 180 liters Main motor power: 11 kW Stroke length (C): 265 mm Installation height (D): 450 mm Projection stand (E): 410 mm Table height (F): 870 mm Table width (G): 170 mm Length (L): 4200 mm Height (H): 2800 mm Width (W): 2200 mm Weight: approx. 7500 kg Cybelec Cybtouch 12 2D Graphic CNC control 3 axes (Y1, Y2, X) expandable with optional R+Z-Axis Eurostamp 2067 lower tool (V: 50, 35, 22, 16) Eurostamp 1260 upper tool 85 ° Narrow table All-steel welded construction Promecam quick clamping system CNC-controlled motorized backgauge (X: 750 mm) Adjustable backgauge fingers Inch and metric system can be selected Ground and chrome-plated cylinders Swiveling control panel Foot control with anti-panic stop & emergency shutdown Lateral protective grille (secured with limit switch) Light curtain on the back of the machine (900 mm) DSP laser finger protection system at the front (CE) BOSCH / REXROTH or HOERBIGER / HAWE hydraulic system BOSCH / REXROTH or ECKERLE hydraulic pump Slidable front support arms (2 pieces) Electronics unit from: SIEMENS, SCHNEIDER, DELTA, ABB, OMRON 380 V 50 Hz Painting: RAL 7035, RAL 5015 Optional special accessories available at an additional cost: -CNC-controlled R-axis (250 mm) -CNC motorized crowning -Servo driven motors backgauge system for X + R axis (Mitsubishi) -Painting in special colors on customer request Cjdsgu N Alspfx Aqveri Documentation in German or English CE conformity

Condition: new, pressure: 175bending length: 4050column width: 3550daylight: 600stroke lenght (max.): 350column throat depth: 450messurements (LxWxH): 4790x2290x3030weight approx.: 13,2504 axes (Y1, Y2, X, R): Ja alle Achsen über Steuerung Esa S630 (2D Grafik Steuerung)CNC crowning system by control: ja über die Steuerung Esa S630 (2D Grafik Steuerung)motor power: 22Standard equipment: KK-Industries has the general representation of the DENER Group We have put together a high-quality model for Europe. The CNC press brake KK-Industries made by DENER Model KKI EUROPA XL The strong press brake EUROPA XL with high precision, accuracy universally applicable. Europa XL has a very large installation height and accordingly a long stroke. The projection is also above average in order to limit as little as possible. We focus on quality, which is also reflected in the control system. As standard control we have the high quality DELEM DA 66 T. Also with the CNC axes we have standard Y1, Y2, X and R. Of course, the CNC crowning via the Delem DA 66 T standard. Even with the upper tool and the die we make no compromises and equip the CNC press brake KKI EUROPA XL with quality tools from EUROSTAMP Italy. Of course, every machine is just as good as the service. That's why we put our focus on highly qualified employees with long experience in the CNC sheet metal working area. Csdpfx Aqed Ehidoveri

Condition: new, pressure: 150bending length: 3050column width: 3050daylight: 590stroke lenght (max.): 300messurements (LxWxH): 4740x2000x2680weight approx.: 9500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Cjdpfx Ajd Etf Ejqvsri

Condition: new, pressure: 175bending length: 3570column width: 3570daylight: 590stroke lenght (max.): 300messurements (LxWxH): 5340x2100x2680weight approx.: 11500motor power: 22CNC crowning system by control: jaCNC Servo Electric Press Brake KKI / Dener Mod. REVOLUTION DDM-4015 Technological advantages     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brake Servomotoric press brake REVOLUTION Servo-electric press brakes do not include a hydraulic system and are the technology of tomorrow due to their flexibility and reliability. Higher speed and accuracy of this new generation of machines gives you better efficiency, ergonomic features and more environmentally friendly production technology. As the first manufacturer of servo-electric press brakes with different models and tonnages Dener is a pioneer of this technology. With a lot of experience and quality. Standard equipment: KK-Industries has the general representation of the DENER Group. We have put together a high-quality model for Europe. The CNC Servo Electric Press Brake KK-Industries made by DENER: Technological advantages: Mod. REVOLUTION DDM The CNC Servo Electric Press Brake is characterized by its high precision, accuracy and versatility.     100% electric, 0% hydraulic oil     Up to 50% less energy consumption compared to conventional hydraulic press brakes     High efficiency and accuracy     High bending speed and much quieter     Total length usable between the frame     Lower maintenance costs     environmentally friendly     User friendly control panel     Automatic calculation of bending steps directly from STEP or DXF files     Up to 35% faster than hydraulic press brakeStandard equipment: 3D color graphics control DENER 660 W 19 touch screen Y1, Y2, X, and R axis CNC via the controller X-axis 500 mm R-axis, stroke 150 mm at 1.5 m and 2 m X-axis 750 mm R-axis, stroke 250 mm on all other pressbrakes Even with the upper tool and the die we make no compromises and equip the CNC Servo Electric Press Brake KKI DENER REVOLUTION with quality tools from EUROSTAMP Italy. split cranked upper tool 4-V die block 60x60 (V = 16,22,35 and 50 mm) Backgauge with servomotors controlled on linear guide and ball screw Of course, every machine is just as good as the service. That's why we focus on highly qualified people with long experience in CNC sheet metal working. Laser protection device Fissler at the upper beam CE protection Operating instructions in GERMAN and ENGLISH options: Additionally controlled axes of the back gauge X1, X2, R, Z1, Z2, Delta X ATF Type 6 Axles Backgauge, X1, X2- R Type Backgauge, X-Prime Type Backgauge Hydr. Upper and lower tool clamping for WILA Werkzeue CNC control DELEM DA-66T, CNC 3D touch screen control DELEM DA-69T Crjdpfed Etf Dox Aqvei

Condition: new, More technical data on request                    Vertrauen Sie auf das Maschinenservice von KK-Industries GmbH                 Die Lebensdauer einer Maschine hängt entscheidend von  Wartung und Pflege ab. Nur wenn Maschinen ordentlich gewartet werden,  lassen sich diese auch jahrelang weitgehend uneingeschränkt nutzen.  KK-Industries hat deswegen für Sie einen optimierten Maschinenservice  ins Leben gerufen, von dem Sie als unser Kunde profitieren. Unser  Service-Team, das für Sie den Maschinenservice stemmt, setzt sich aus  hochqualifizierten Experten zusammen, die ausgesprochen professionell  arbeiten. Für uns ist es eine Selbstverständlichkeit, dass Sie bei uns  ausschließlich Maschinen erhalten, die qualitativ absolut hochwertig  sind. Ergänzt wird dies durch unseren exzellenten Service, der von  Anfang durch seine Kundenorientierung auffällt. Leistungen unseres Kundendienstes im Überblick Mit  unserem Maschinenservice bietet Ihnen unser Kundendienst ein gelungenes  Angebot verschiedener Leistungen, das Sie flexibel in Anspruch nehmen  können. Wir führen für Sie Inbetriebnahmen und Ersatzbestellungen durch.  Darüber hinaus bieten wir unter dem Dach von unserem Maschinenservice  Einschulungen, Servicearbeiten und Instandsetzungen an. Auch  Sicherheitsprüfungen werden durch unsere Fachkräfte durchgeführt.  Verlassen Sie sich bei unserem Maschinenservice darauf, dass wir nur mit  gut ausgebildeten Servicetechnikern arbeiten. Sie können in der Branche  auf jahrelange Erfahrung verweisen. Maschinenservice   für: Blechbearbeitungsmaschinen Abkantpressen, Tafelscheren,  Laser ..   Accurl, Adira, Amada, Atlantic, Baykal, Boschert, Bystronic Beyeler,  Dener, Durma, Durmazlar, Ermaksan, Farina, Gasparini, Gecko, Haco, MVD,  HMP, Prima Power, Promecam, Rico, Salvagnini, Schiavi, SMD, Warcom... Sichern Sie sich langfristigen Erfolg Unsere  ausgebildeten Servicetechniker garantieren Ihnen bei unserem  Maschinenservice ein hohes Niveau. Wir bauen auf einen guten Service,  hohe Qualität und Flexibilität. Mit dieser können wir uns an Ihren  Wünschen orientieren. Uns ist es wichtig, dass Sie mit unserem  Maschinenservice absolut zufrieden sind. Dabei liegt es uns am Herzen,  dass Sie sich für eine langfristige Partnerschaft mit dem Team von  KK-Industries entscheiden. Damit ihre Kosten überschaubar bleiben, haben  wir unseren Maschinenservice für Sie besonders günstig gestaltet. Unser  Maschinenservice ist die perfekte Ergänzung zu unserem  Maschinenangebot. Vertrauen Sie auf unsere Erfahrung und setzen Sie auf  Servicemitarbeiter, die ihrer Aufgabe mit Leidenschaft nachgehen. Siehe unseren Monteuranforderungsschein: Ich hoffe auf eine gute Zusammenarbeit Mit freundlichen Grüßen KK-Industries GmbH Klaus Kletzer     Codpfxod N Swps Aqvjri Abkantpresse  Tafelschere Schweißtisch Laserschneidanlage Hydraulikpresse  Werkstättenpresse Gebrauchtmaschine Blecheinrollmaschine Bandsäge  Ausklinkmaschine Bohrmaschine Exzenterpresse Profilstahlschere  Stanzmaschine Nibbelmaschine Schwenkbiegemaschine Kreissäge  Rohrbiegemaschine Langabkantmaschine Winkelbieger Bördelmaschine  Drehmaschine Breitbandschleifmaschine Schleifmaschine Falzformer  Fräsmaschine Spaltanlage Längs- und Querteilanlage Entgratungsm

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. Crjdpfx Aerq D Nieqvji The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: new, pressure: 175bending length: 3200column width: 2700daylight: 430stroke lenght (max.): 200column throat depth: 400messurements (LxWxH): 4200x1900x2700weight approx.: 10.000 Csdpfjd Akllsx Aqvori

Condition: new, The APHS MAX is a custom-engineered, heavy-duty press brake developed for large-scale and special bending applications. It is designed to meet the demands of industries requiring extra-long, high-tonnage, or custom-configured press brakes. This model combines power, precision, and adaptability, making it ideal for processing oversized workpieces and fulfilling unique production requirements. Codpfownagtex Aqvori