Used press brakes with 150-199t bending force for sale (148)

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2002, machine/vehicle number: K 3945, working width: 3,100 mm, stroke length: 300 mm, pressing force: 170 t, TECHNICAL DETAILS Press force: max. 1,700 kN Working pressure: max. 345 bar Connected power: 11 kW Working range Working length: max. 3,100 mm Stroke: max. 300 mm MACHINE DETAILS Connection voltage: 3×400 V 50 Hz Weight: 12,500 kg Top beam stop time: < 94 ms Hfjdpswlqa Sefx Aalsd

Condition: new, Year of construction: 2025, 150 t 3100 mm 2600 mm 400 mm Hsdpfxoxmalko Aalefd 270 mm 800 mm

Condition: new, Year of construction: 2024, Make: DURMA Type: AD-S 30175 Year of construction: 2020 Folding length: 3050 mm Pressing force: 1750 kN Control: CNC DT-15 Operating hours: 33 h Bcq29blmc8 Controlled axes back gauge: X,R Clearance between the uprights: 2600 mm Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand projection: 410 mm X-axis travel range: 650 mm Traversing speed X-axis: 250 mm/s Infeed speed: 160 mm/s Folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Hfodsd Srk Sspfx Aalod Standard equipment Y1,Y2, X=650 mm Control: CNC DT-15 European die clamping system 60 mm die holder (only for European die system) 2 support arms movable from the front with linear guide along the entire length Servo motor backgauge Safety covers on the side CE marking Extended equipment Safety system CE with manual FIESSLER AKAS II M-FPSC- Controlled axes X,R-axis, Z-axes manually adjustable CNC controlled motorized crowning European upper tool/lower tool from Rolleri The machine can be viewed and demonstrated at any time by appointment at our demonstration center in Staufenberg. Further machines are available for demonstration in Staufenberg. We will be happy to send you further information on request.

Year of construction: 2006, condition: good (used), functionality: fully functional, machine/vehicle number: 138883, TECHNICAL DETAILS pressure: 160 t folding length: 4100 mm column width: 3100 mm Control: DELEM DA66W table width: 120 mm Stroke: max. 800 mm Speed downwards: 80 mm/sec Speed upwards: 80 mm/sec Speed under load: 8 mm/sec Hfedpfslp Iq Rsx Aaled MACHINE DETAILS oil capacity: 185 l total power requirement: 24 kW machine weight: approx. 13 t space requirement: approx. 4.8 x 2.2 x 2.2 m

Year of construction: 1990, condition: used, pressure 1500 kN chamfer lenght 3550 mm distance between columns 3044 mm Control Cybelec 34 PS-CN column arm 350 mm max. ram stroke 220 mm dimensions of the machine ca. 3200 x 4200 x 2100 m sheet support hinten / back number of support arms 2, verschiebbar / adjust. die shift hydraulical tool clamping Hfodpfod Ih S Uex Aalsd upper tool quick change system crown 3 sets of tools included

Condition: new, MVD Synchronized Hydraulic Bending Press Mod. I-Bend B 3100 175 ESA S860 Touch color videographic numerical control Controlled axes No. 7+1 ( Y1-Y2-X-R-Z1-Z2-A1 ) WILA motorized compensation table Multi-beam barriers NEW ELECTRONICS DSP LASER UNIMEC high-speed motorized rear register (Made in Italy) GIVI MISURE optical scales (Made in Italy) Hfodpfx Ajfh Nz Eoaled Bending length mm 3100 Power exerted Ton 175 Recess mm 410 Stroke mm 260 Opening mm 465 Upper tools and lower die ROLLERS supplied

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2009, controller model: Cybelec ModEva 10S, bending force (max.): 170 t, empty load weight: 16,300 kg, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Hodjxwnv Espfx Aalofd Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Tool cabinet with tools

Year of construction: 1983, condition: used, machine/vehicle number: 28148, pression: 150 t Hodpfx Aaeb N Evmolofd working width: 4500 mm clear support width: 3050 mm support throat: 300 mm rear stop: 1000 mm electrical connection: 380 V, 18,5 kW weight: 14,8 t space needed: 4200 x 2000 x 3000/3150 mm

Year of construction: 1991, condition: used, machine/vehicle number: K2940, pression: 150 t Hfodj Dnf Ujpfx Aalod working width: 4300 mm clear support width: 3600 mm support throat: 300 mm max. assembly height: ca. 500/700 mm working speed: auf-/abwaerts 41 - 65/10 mm/sec rear stop: 1000 mm electrical connection: 400 V, ca. 15 kVA kW weight: 14 t space needed: 4600 x 1950 x 3100 mm

Year of construction: 2024, condition: new, The DA-69T controller offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on the feasibility and handling of the product. Delem-69T properties: - 3D and 2D graphic touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Bending and correction interface sensor - Profile-T3D offline software Hfsdpfx Aasd Tpadoled - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! AD-S 30175 with Y1, Y2, X and R axis Bending force: 175 tons bending length: 3050mm Passage between stands: 2600mm Rapid speed: 120 mm / sec working speed: 10mm / sec Speed of the return: 100 mm / sec Installation height of tool passage and the penetration depth of your press brake: 30mm table width: 104mm table height: 900mm stroke: 265 mm Projection: 410 mm Support arms: 2 pcs. Stop finger: 2 pcs. Press force and speed of the press brake. X - axis: 500 mm / sec x-axis travel direction 650mm Speed R axis max.: 350 mm / sec R axis travel direction 250 mm Engine power: 18.5 kW Oil tank capacity: 250 litres length 42

Year of construction: 2024, operating hours: 32 h, condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Hsdedx Nluepfx Aaljfd Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Year of construction: 2024, operating hours: 33 h, condition: new, Machine Dimensions: • (L x W x H): 4,250 mm x 1700 mm c 2750 mm Technical data: Bend length: 3,050 mm Free stand passage: 2,600 mm Control: CNC ModEva 19T Controlled axes rear stop: X, R (Z, Optional) Stroke length: 265 mm Installation height: 530 mm Table width: 104 mm Table height: 900 mm Stand extension: 410 mm Travel range X-axis: 650mm Travel speed: X-axis: 500mm/s Delivery speed (Y): 160 mm/s Bending speed: (Y): 10mm/s Working speed: (R): 350 mm/s Travel range R-axis: 250 mm Hydraulic oil volume: 200l Engine power: 18.5 kW Weight: approx. 10,500 kg Basic equipment: Controls: Cybelec ModEva 19T CNC-controlled bombing Clamping system above: Durma (europ.) Clamping system bottom: 60mm - holder Rear stop: AC Servo motors with ball-circuit spindle Hedpedx Nm Tjfx Aalofd Options include: Fiesseler Security System AKAS ll - FPSC-B-C Top tool buttoned: P97.75.R08 (one in split) Subtool, multiple die (die widths 16/22/35/50mm) The machine can be inspected and demonstrated at any time by appointment at our demonstration centre in Staufenberg. Further machines are ready for demonstration in Staufenberg. On request, we will be happy to provide you with further information.

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Lenze, controller model: 9300, bending force (max.): 150 t, working width: 4,520 mm, stroke length: 300 mm, throat depth: 1,000 mm, distance between stands: 3,200 mm, installation height: 950 mm, operating speed: 90 mm/s, travel distance X-axis: 1,000 mm, back gauge adjustment: CNC-controlled, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 2,900 mm, overall weight: 15,000 kg, total length: 4,520 mm, total width: 1,900 mm, total height: 2,950 mm, input voltage: 400 V, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, safety light barrier, Safan press brakes are reputable sheet metal working machines from the Dutch manufacturer, well recognized in the market. The SAFAN E-Brake series is equipped with electric drives, which have been successfully implemented in our machines for almost 30 years. Currently, the largest model of electrically driven presses is available with a capacity of up to 300 tons and features a patented design by the manufacturer. Lenze motors and servomotors, controlled by long-life inverters, enable fast and reliable operation of the system for many thousands of operating hours. Thanks to its innovative drive, the machine uses electrical energy primarily during the downward movement of the ram and the bending process. The return of the ram is achieved by the force of springs mounted on both sides of the machine. Additionally, during idle periods, the machine consumes virtually no electricity, as the system does not include a hydraulic pump motor maintaining pressure, as is the case with hydraulic presses. Hodpox Ewnpefx Aaljfd Energy consumption is estimated to be up to 70% lower compared to conventional hydraulic presses. Furthermore, the electric drive is insensitive to temperature fluctuations that may occur in production halls. The machine performs excellently in both long and short production runs. Safan E-Brake 150-3100, model year 2007 - Safan TS 1 controller - 2D bending system - 13” color touchscreen - Control panel on a movable arm - CNC-controlled Y1/Y2 axis - CNC-controlled X axis - CNC-controlled R axis - CNC-controlled Z1 + Z2 axis - Wila upper tool adapter (mechanical clamp) - Safan OBS/3 lower tool table (compatible with Wila and Promecam tools) - Lightguard safety system with upper beam descent control - Work area lighting at the front and rear of the machine - Electrical installation: 3/N/PE 50 Hz 400/230 V - Opening: 690 mm - Table length: 3060 mm - Distance between machine frames: 3300 mm

Condition: good (used), functionality: fully functional, Year of construction: 2008, Press force: 170 t Bending length: 4050 mm Machine weight approx.: 16,300 kg Control: ModEva 10S Equipment: - CNC control Cybelec ModEva 10S - Lasersafe - 2 sheet supports - Die shifting - Crowning system - Pneumatic tool clamping (top and bottom) - Controlled axes: y1, y2, x, R, z1, z2 Hodpfexu I Ucsx Aalefd - Tool cabinet with tools

Condition: used, Year of construction: 1987, pressure 160 t chamfer lenght 4000 mm distance between columns 3060 mm control FORTRON CNC 10 H 4 throat 280 mm stroke 250 mm dayligth 500 mm table length 4050 mm table width 280 mm feed down 70 mm/sec feed up 68,4 mm/sec working feed 9 / 3,5 mm/sec operating pressure max. 205 bar oil volume 400 l total power requirement 19,5 kW weight of the machine ca. 20,8 t Total weight including accessories 22 t dimensions of machine L x W x H 4,8 x 1,88 x 2,93 m dimensions of switch cabinet 1,6 x 0,5 x 2,25 m - 3-axis machine - Hfodpfx Aajtqqr Relod Acc.: programmable back gauge, upper and lower dies, table extensions

Condition: good (used), functionality: fully functional, Year of construction: 1997, degree of automation: manual, working width: 4,000 mm, distance between stands: 3,145 mm, overall weight: 10,500 kg, total length: 4,180 mm, total width: 1,600 mm, total height: 2,665 mm, LVD PPT165 COPY 4000 mm 165 T Hfsdpfx Aow Eawyjaled Easy to operate. Not CNC. Transport can be arranged. It appears the machine is a copy of LVD. Sold by SH Trading.

Condition: new, neu ca. 12 - 14 Wochen ab Auf Türkei 94120 € 1778.87 € 175 to 4050 mm Y1 / Y2 / X Achse 265 mm 3600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 140 mm/s 500 mm/s 350 mm/s 250 mm 900 mm 104 mm 250 l 18.5 kW 5250 mm 1700 mm 2850 mm 12780 kg 3 axes (Y1, Y2,X) CNC control DT-15 - 2D grafic display 15" - intuitive touch-screen control (simple drawing of the bending outline with your finger) - user friendly programming in dialogue form - automatic calculation of the bending sequence - automatic calculation of the blank sheet size - graphic product and tool memory - correction possibility - USB interfaces for backup and programm transportation - PC software, generating programms on the PC and transfer to the machine by USB servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010 / A / 75 °, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PDF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ... optional equipment: R-Axis R/Z1/Z2-Axis Hodpfx Aajwiqr Njlefd DBend, 3D CAD/CAM importing- and simulation program (step, iges and dxf file import) CNC Control SKY22 CNC Control Delem DA66 S CNC Control DELEM DA-69S 3D incl. PC software Profile-S with 3D file import option Quick Release Clamping

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp Hjdeiwfp Topfx Aaljfd - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

Condition: new, Year of construction: 2023, operating hours: 0 h, new IMMEDIATELY available CNC press brake YAWEI PBC50/2050-4C - Pressing force: 500KN - max. bending length: 2050mm - Year of construction 2023 - CNC controlled hydraulic crowning - Cybelec VISITOUCH 19T control - WILA hydraulic upper tool clamping - 60mm table with 13.5mm x 22mm groove for insertion dies - 2 front support arms can be moved on linear guides Hsdpfx Ajqgcrnsalefd - CE with Fiessler AKAS II - 12 months warranty - Commissioning, training

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1993, bending force (max.): 150 t, stroke length: 700 mm, throat depth: 350 mm, distance between stands: 3,050 mm, working length: 3,550 mm, The control system was retrofitted in 2011! TECHNICAL DETAILS Hsdpfoxn Srxox Aalofd Press force: 150 t Bending length: 3,550 mm Distance between uprights: 3,050 mm Stroke: 700 mm Throat depth: 350 mm MACHINE DETAILS Control: Cybelec DNC 880S Dimensions & Weight Dimensions (L x W x H): 4,400 × 2,200 × 3,940 mm Machine weight: approx. 15,000 kg EQUIPMENT Bending aid in front of the machine Parking space for bending aid 3 backgauge fingers

Condition: good (used), Year of construction: 1997, machine/vehicle number: 887043, Offer 24557 Technical data: - max. working length 4060 mm - column clearance 3680 mm - max. pressing force 1700 kN - max. distance table / ram 385 mm - column projection 410 mm - ram stroke 215 mm Hfjdpfou T Nknjx Aalod - stroke speeds - downward speed idle max. 200 mm/sec - upward speed 135 mm/sec - downward pressing speed 1 to. 11 mm/sec - Total drive power 30 kW - Space requirement approx. W 5600 x H 3000 x D 2400 mm - Weight approx. 18000 kg - with: - with 6-axis CNC control DELEM - Two-hand control panel with foot switch - Crowning device - Controlled back stop with height adjustment 5 - 860 mm - Hydraulic upper + lower tool clamping - Die table displacement pneumatically supported

Year of construction: 1990, condition: good (used), machine/vehicle number: 59502, Lg.No. 22564 Technical data: Hfedpfjin I Nbjx Aaled - Pressure capacity 150 t - working width 2600 mm - passage between the columns 2100 mm - table width 180 mm - throat 250 mm - installation height 325 mm - Drive 400 V / 7,5 kW - space requirement approx. W 3000 x H 2400 x D 1600 mm - weight approx. 7000 kg - with: - Two-hand control panel with foot switch

Condition: good (used), Year of construction: 2006, machine/vehicle number: 91426, Offer 25227 Technical specifications: - Pressing force: 150 t - Working width: 3600 mm - Clearance between uprights: 3150 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 325 mm - Approach speed: 70 mm/sec - Working speed: 7 mm/sec - Return speed: 60 mm/sec - Ram stroke: 120 mm - Adjustable backgauge range: 120 mm - Motor power: approx. 7.5 kW - Oil capacity: approx. 300 l Hfjdpfewvih Njx Aalod - Space requirement: approx. W 3850 x H 2300 x D 1600 mm - Weight: approx. 8700 kg Includes: - Swivel arm – operator panel with ATL 550 control - For pressing depth & backgauge - Motorized backgauge - Crowning device - FIESSLER Lasersafe - 4-way universal die, segmented punch tool & “gooseneck” die - Two-hand operation desk, foot pedal,

Condition: good (used), Year of construction: 1997, Pressure 160 t folding length 3550 mm Hfsdpotx Ugnefx Aaled stroke 300 mm Weight 15400 kg

Year of construction: 1998, condition: excellent (used), functionality: fully functional, TECHNICAL DETAILS pressing force: 170 t bending length: max. 3340 mm stroke: 180 mm distance between the uprights: 2700 mm Hfedpfx Aaemkhynjljd MACHINE DETAILS weight: 11.000 kg space requirement: 3720 x 2180 x 3170 mm