Condition: excellent (used), MSE Manual Pallet Stacker Model MSE1500/2500 Gcedpfsx Eza Nex Aaysa Lifting capacity 1500kg Max lifting height 2500mm CE approved Mobile on lockable castors

Condition: excellent (used), Year of construction: 2018, Ref: 11021 . 2018 Little David 'Legend Uniform' Box Sealer Semi-Automatic, state-of-the-art top and bottom case taper for sealing boxes from 2.625" to 24" in height. Features: Plug in operation Gcodjxnzqdepfx Aayea CaseLocker ST tape cartridge requires no lubrication Knife guard system of the tape cartridge exposes blade only when the rollers are depressed Continuous belt drive Patented single mast design allows clear access Sealed drive & internally mounted electrical systems Industrial strength case taper Seals box heights from 2.625 to 24 inches Interchangeable tape cartridges Infeed pack table Heavy-duty steel construction Quick changeover Very safe, reliable & user friendly Specification: Case range length: 4.5" (114 mm) - infinite Width: 4.5" (114 mm) - 22" (559 mm) Height: 2.625" (64 mm) - 24" (610 mm) Speed: 80' per minute (24.4 m/min) Power: 115 - 220 volts, 60 cycle, single phase Dimensions: W: 37.375" (95 cm) / L: 30.25" (77 cm) / H: 61.25" (155 cm) Machine Weight: 230 lbs (104 kg) uncrated

Condition: used, Used PET Bottle Recycling Line. Approximately 2,000 kg/hour (4,400 lbs/hour) input, producing about 1,700–2,000 kg/hour (3,750–4,400 lbs/hour) of clean PET flakes depending on feedstock quality and operating conditions. The line was built in 2011-2012. Originally designed for processing post-consumer PET bottles into clean PET flakes. Includes bale breaking, bottle sorting, size reduction, hot and cold washing, polymer separation, flake sorting, and bagging. Main Equipment Includes: Infeed conveyor Bale breaker Metering screw conveyors Star screen classifier Vibrating chute (2) Sesotec optical bottle sorters (4) Collecting conveyors Cutting mill (Model KSM 800-1530) Friction washers Gcsdpfx Asw U A Ixjayoa Hot washers with recirculation systems Sink-float separation stage Post washer and recirculation system (2) Double-stage air separators Sesotec optical flake sorter (9) Filling stations Electrical control system Steel structures and piping More information is available on request.

Condition: ready for operation (used), A good used induction heat sealer model ICS 1H from Relco UK - ideal for low speed semi-automatic or manual line with diaphragm in cap for sealing onto container. Godpsua E Rqefx Aayeca

Condition: excellent (used), Year of construction: 2021, operating hours: 80 h, functionality: fully functional, Almost as new carton collator wrapper. Bought for a project to wrap large pizza cartons in stacks, currently set for packs of five or six. Only used for a few weeks due to contract change. Gcodpfx Aox Alcgsaysa

Condition: good (used), Year of construction: 2002, functionality: fully functional, Mosca Bundle Strapper – PD-TRC-3 (2002) Professional strapping machine for bundling cardboard stacks, die-cut sheets, or bale support. Key Features: • 415V 3-phase motor • Automatic arch strapper • German-built reliability • Ideal for end-of-line packaging Gedpfxjx Ekvts Aayoca • Working when removed Price: £4,500

Condition: used, EX Box Taper / Case Sealer / carton Sealer Side drives Top and bottom tape heads 50mm wide tape Fully guarded Gcjdjx Dnlgepfx Aayja 230 volt power supply

Condition: used, This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system. Capacity: 2000 bottles per hour Aluminium Cutting: Fords systems Gcedpfx Aexzx S Ssayoa Format: 1 Pint Milk Bottles Sealing Device: Included Construction: Fully Stainless steel on product connection Parts Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over Collection Table: Included Condition: Will be fully refurbished or As is

Condition: used, Used Framax glass bottle filling line with capacity approximately 2900 bottles / hour made in 2017 and used for approximately 2500 hours. Equipment includes isobaric bottling machine model Modulblock RFC1-16/16/1-DPS/C and also depalletiser, packer (box former, 24 bottles/box). Gcodpfxow U A Ifj Aayea Previously used for craft beer and RTD (Ready To Drink) carbonated pre-mixed alcoholic drinks. Equipment list and additional photos available on request.

Condition: ready for operation (used), functionality: fully functional, A good used automatic labelling system featuring twin belt drive with speed control - system was used for automatic labelling of the underside of boxes/cartons on a production line - barcode scanner is integrated to detect the presence of the label (which contained a barcode) and if no label detected the system alarms and stops - barcode scanning can be disabled if not required Single phase 240Volt AC supply Gedpfxewufb Aj Aaysca Ready to ship worldwide

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently approx. €250,000 Description: Complete solution for dosing and packaging dry ice pellets. Fully automated process, designed for high output and reliable operation. Advantages: Further information regarding the bagging machine: System dimensions: The full installation measures 6 meters in length, 3.20 meters in height, and approximately 1.20 meters in width. The round turntable (disc) has a diameter of 1.5 meters. The system does not have to be installed in a straight configuration. It can be rotated 90 degrees in two sections, allowing for a U-shaped layout. This flexibility permits installation in more confined spaces without impacting performance. The system’s height is fixed and not adjustable. Machine output: The system offers an output of approx. 500 kg per hour. Bag size and weight: Bag dimensions can be fully configured for your requirements – ranging from small bags of approx. 5 grams up to larger bags of 20 kg or even 40 kg. The setting can be flexibly adapted to your production needs. Buffer tank: The buffer tank provides a capacity of 20 kg. Maintenance costs: Gcodpfx Asw Ttxfjayoa The average annual maintenance expenditure, excluding materials and call-out charges, is between €1,200 and €1,500 per year.

Condition: excellent (used), Plastic strapping, strapping, packaging tape, tensioning strap, plastic strap -Strapping: plastic strapping Gcodelry Suepfx Aayja -Width: 15mm -Thickness: 0.6mm -Quantity: 1 roll -Price per piece -Dimension: Ø 600 x 155 mm -Weight: 11.6 kg

Condition: used, Year of construction: 2001, functionality: fully functional, We have a Buhrs 1500 poly wrapping system available. Year 2001. This system is not very often used last years by former owner. The system will be delivered completely with vacuumpumps, so complete. SYSTEM INFORMATION System brand: Buhrs Machine type: Buhrs 1500 Poly Wrapping System (max.13.000 c/h) Year: 2001 CONFIGURATION 1 Buhrs 1500 main product feeder, type shuttle feeder 1 Buhrs 1500 master base station 4 Buhrs 1500 rotary feeder 1 Buhrs 1500 module for filmpackaging Godpfjx Agk Ssx Aayjca Machine can be seen running!!!!

Year of construction: 2025, condition: new, Our KVK 1A is the almost identical sister model to the KVK 2 (MA), i.e. a semi-automatic stretch wrapper with turntable which, in comparison to the KVK 2 MA, is equipped with a cut-out for ground-level access with a hand pallet truck. The only thing that still has to be done manually with this wrapper is feeding and cutting the film. With a weight of 700 kg, this model is also designed for professional use and can be loaded up to 1500 kg. The 1A has a turntable of 1500 mm and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Gsdjx Exi Uspfx Aayeca If the winder needs to be used at a different location in between, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a photocell for detecting dark packages or black film, the wrapping height of the KVK 1A can be varied as an option (up to 3200 mm). Recommendation The KVK 1A is ideal if no ramp can be used for space reasons or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Condition: ready for operation (used), functionality: fully functional, A good used gravity freefall through hole metal detector from S+S with a 150mm diameter through hole - ideal for powders or granular products in free fall for accurate detection of Fe, Non-Fe and Stainless Steel. Tested and working Ready to ship worldwide Export Documentation and shipping can be provided. Gcsdpfxexakyro Aaysa Manual in English available also

Condition: good (used), Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler, tensioning and sealing device Gcjdpfxei I Hdge Aaysa -Tensioning pliers: sealing device for strapping -Band width: approx. 16 mm -Staples: approx. 19 mm wide, see photo -Dimensions: 480/100/H170 mm -Total weight: 3.6 kg

Year of construction: 2025, condition: new, Our KVK 3 is a semi-automatic stretch wrapper with turntable which, compared to the KVK 2 (MA), is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal tension, so that even light packages are not pulled off the turntable. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 3 has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. Gsdpfx Asx Exi Ijayeca In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with diameters of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 3. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets per day. For further information we have attached the technical data sheet as PDF to this advertisement !

Condition: ready for operation (used), Display from a Boekels Discovery C Metal Detector - tested and working Gcjdpfxoxv R Axe Aayea Ready to ship worldwide

Year of construction: 2025, condition: new, Our KVK 5 is a semi-automatic rotary arm wrapper, which has the advantage over our wrappers with turntable that your pallets can be placed at ground level for the wrapping process. Equally ideal for light, unstable and heavy packaged goods, as there are no centrifugal forces and no load-bearing capacity to consider. Gcjdpfx Asx Exiusaysa In addition, the KVK 5 model is equipped with a pre-stretch system for 250% elongation. This pre-stretching system allows you to produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. With the KVK 5, there is only minimal contact tension, so that even light packages are not pulled off the pallet. The only thing that still has to be done manually with this wrapper is applying and cutting the film. The machine weight of almost 1000 kg shows how solid and stable this wrapper is. With its rotating arm, it can wrap pallets up to a maximum dimension of 1.00 x 1.20 x 2.40 m. With adjustable speeds of the rotating arm and film carriage, as well as a pre-stretching unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. In addition to an optional photocell for the detection of dark packing goods or black film, this wrapper can be supplied either for wall mounting or with the feet shown. We recommend this model if it is important to you not to have to overcome a ramp with your goods - for example because they are too heavy or unstable. The fact that the rotating arm in this design rotates around the pallet also avoids any centrifugal force. Together with the low contact tension of the pre-stretch system, this also makes the KVK 5 ideal for very light packaged goods. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. Gcedpfsx Exinjx Aaysa If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2A is a semi-automatic stretch wrapper with a cut-out for ground level access. The KVK 2A model is equipped with a pre-stretch system for 250% stretch. Thanks to the pre-stretch system, you can produce up to 3.5 meters of film on the pallet from 1 meter of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 2A has a 1500 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of turntable and film carriage, as well as a power stretch unit adjustable via potentiometer, you can adapt the automated wrapping perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. This model is our recommendation if you wrap very light packages or if you wrap more than approx. 30 pallets a day. The KVK 2A is ideal if no ramp can be used for space reasons. Or if particularly heavy or unstable packaged goods are not to be pushed onto the turntable via a ramp. Gsdox Exhkjpfx Aayjca For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, The KVK 600 is ideal if you are looking for a mobile solution to stretch-wrap your packaged goods. Or if you have packaged goods that are too large or too heavy for a pallet wrapper with a turntable. With its electric steering, the KVK 600 can be easily moved to any corner of your warehouse. Its rechargeable battery is designed for 8 hours of continuous operation. The KVK 600 has a power stretch system with up to 300% stretch. This significantly reduces your film consumption, as 1 meter on the roll becomes 4 meters on the pallet. In addition, this system creates only minimal contact tension, so that even lightweight packaged goods can be wrapped easily. Up to 10 individual programs can also be saved for the KVK 600, in which you can specify for each step (foot wrapping, ascending wrapping, head wrapping and descending wrapping) how quickly and with what film tension they should be carried out. This allows you to store individual programs for each wrapping scheme in order to achieve ever more perfect wrapping results. The programs can be password-protected so that the user can only select from the stored programs. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. In addition to a photocell for the detection of dark packing goods or black film, a higher mast and a set of exchangeable battery and external charger are also available for the KVK 600. This model is our recommendation if you want to use your stretch wrapper on the move, or if you have pallets with excessive dimensions and value absolutely consistent results. Gcodpfox Exfvsx Aayja For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 3 Slim Line is a semi-automatic stretch wrapper with turntable. It is equipped with a pre-stretch system for 250% stretching. Thanks to the pre-stretch system, you can produce up to 3.5 m of film on the pallet from 1 m of film on the roll and reduce your material consumption enormously. In addition, this system creates only minimal contact tension, so that even light packages are not pulled off the turntable. Gcjdex Exfiopfx Aayea With a weight of 700 kg, this model is very stable and designed for loads of up to 1500 kg. The KVK 3 Slim Line has a 1500 mm turntable and can wrap pallets up to 2250 mm high as standard. With adjustable speeds for the turntable and film carriage, as well as a potentiometer-controlled power stretch unit, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs for "up & down" (cross wrapping) and "rainproof" wrapping are available. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. A suitable drive-on ramp and a photocell for detecting dark packaging materials or black film are optionally available. This model is our clear recommendation if you wrap very light packages or wrap more than approx. 20 pallets a day and do not exceed a maximum pallet dimension of 800 x 1200 x 2250 mm. For further information we have attached the technical data sheet as PDF to this advertisement !

Year of construction: 2025, condition: new, Our KVK 1S is a low-cost, semi-automatic stretch wrapper. In contrast to our KVK 1S Economic, this version has more powerful motors and a more robust turntable. The KVK 1S has a 1500 mm turntable and can wrap pallets up to 2250 mm high. The only thing that still has to be done manually with this pallet wrapper is the application and removal of the film. Godpfx Asx Exfcsaysca The speeds of the turntable and film carriage, as well as the brake tension, are adjustable. Automatic detection of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof wrapping". If required, the winder can also be controlled manually. If the stretch wrapper needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. As further options for this stretch wrapper, we offer a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film. The KVK 1S is our recommendation if you want to purchase a robust pallet wrapper that makes your life easier with the lowest possible investment. The KVK 1S is ideal for shippers with a pallet volume of between approx. 5-15 pallets per working day (on average). For further information, we have attached the technical data sheet as a PDF to this advertisement!

Year of construction: 2025, condition: new, Our KVK 2 (MA) is a semi-automatic stretch wrapper with a turntable that is even more robustly built, better equipped and can be adapted to your requirements with more options compared to our entry-level model. The only thing that still has to be done manually with this wrapper is applying and cutting the film. With a weight of 700 kg, this model is designed for loads of up to 2000 kg. The KVK 2 (MA) has a 1650 mm turntable and can wrap pallets up to 2400 mm high as standard. With adjustable speeds of the turntable and film carriage, as well as an electromagnetic brake that can be very finely adjusted via potentiometer, you can adapt the automated wrapping process perfectly to your product. Automatic recognition of your pallets (via photocell) is just as much a matter of course as adjustable head and foot wrapping. Programs are available for "up only" wrapping, "up & down" (cross wrapping) and "rainproof" wrapping. If required, the winder can also be controlled manually. If the winder needs to be moved to a different location, it can be easily lifted and moved with a forklift using the integrated cut-outs. In addition to a suitable drive-on ramp and a photocell for detecting dark packaging materials or black film, turntables in various sizes with a diameter of up to 2200 mm and higher masts for a wrapping height of up to 3200 mm are optionally available for the KVK 2 MA. This stretch wrapper is our recommendation for professional use, with approx. 15-20 pallets per day. Especially when a fine and quick adjustment of the brake is required, as is the case with very light packing units or frequently changing pallets. Gcjdpfx Asx Exdxeayoa For further information, we have attached the technical data sheet as a PDF to this advertisement!