Used other metal processing machinery for sale (542)

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Bjdpfx Acjy R Tk Rj Towt Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: used, functionality: limited functionality, Great deals, top prices – please inquire. I am offering 4 used, refurbished Flow high-pressure pumps with oil coolers, see below: Pump 1 Flow 7XD -60, 7856 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-water cooling, Pump 2 Flow 7XD -60, 25179 operating hours, 2 intensifiers, both working simultaneously, 4.5 l/min, 45 kW motor, oil-air cooling, Pump 3 Flow 20XR, 48000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Pump 4 Flow 20XR, 55000 operating hours, 2 intensifiers, 1 is redundant as a reserve, 3.8 l/min, 37 kW motor, oil-air cooling Bwsdpezivhtsfx Ac Tot The pumps are from a single original owner and are in good condition. Pump 1 + Pump 2 are already ready for shipping and have been tested. Pump 3 + Pump 4 are also available at a special price as a unit or for self-installation. Both pressure intensifiers per pump have been completely overhauled. Prices available upon request.

Condition: ready for operation (used), functionality: fully functional, Invema radial drilling machine Arm length: 130 Drilling capacity in steel: 45 mm Accessories: cube Bwjdpfezv T E Nex Ac Tet

Year of construction: 2015, condition: ready for operation (used), controller manufacturer: SIEMENS, Robotic Brushing Cabin manufactured in 2015. This M.A.I. ASD 1 features a KUKA 6-axis industrial robot arm and a Siemens SIMATIC Touch Panel for intuitive control. It includes a mobile Ruwac industrial dust extraction system and a central vertical clamping fixture for workpiece positioning. With comprehensive safety features such as a fully enclosed booth and emergency stop controls, this machine ensures a secure working environment. If you are looking to get high-quality brushing capabilities, consider the M.A.I. ASD 1 machine we have for sale. Contact us for further details. Bwsdpfxezu Rwtj Ac Tst - Description: Robotic Brushing Cabin- Integrated Industrial Robot: KUKA 6-axis industrial robot arm (labeled "04")- Robot Controller: KUKA KRC4- Control Panel: Siemens SIMATIC Touch Panel- Extraction Unit: Mobile Ruwac industrial dust extraction system (Zone 22 ATEX compliant)- Workpiece Fixture: Central vertical clamping and positioning fixture- Safety Features: Fully enclosed protective booth, safety light curtains (Leuze electronic), interlock key switches (Schmersal / Eaton), Emergency Stop control, and Lockout/Tagout (LOTO) station

Year of construction: 2012, condition: used, This HESA riveting system, model AUTO10 MQB Automation, will be auctioned off online as part of our industrial auction / machine auction, J&S GmbH Automotive Technology - Machine Park. You can find this and many other items on our platform. Bodszxf Nrjpfx Ac Tewt

Year of construction: 2021, condition: used, Load capacity: 2000kg, support surface per table X/Y: 1400mm/900mm, tilting angle: 100°, travel of the movable table: approx. 300mm, drive: hydraulic, control: PLC, operating modes: manual/automatic, collision avoidance in manual operation via table position and table inclination. Equipment: heavy-duty rollers, therefore movable. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1300mm, weight: 1310kg. Documentation available. Inspection possible by arrangement. Bsdpfx Aozu Sztjc Towt

Condition: reconditioned (used), functionality: fully functional, Year of construction: 2007, operating hours: 3,963 h, For sale: a machine for bending and cutting reinforcing steel. Manufacturer: STEMA/PEDAX Model: Twinmaster 16x+ Year of manufacture: 2007 Operating hours: 3963 The machine has undergone a complete overhaul by a professional service provider. Bwsdpezpx T Sefx Ac Tet Included with the machine: - Straight bar table (6 meters long) - 2 unwinders Additional unwinders can be purchased – 4 units available – 5,000 euros/unit.

Condition: used, Year of construction: 2022, For more information, please contact us via email or submit your inquiry. Bwodpezwnqvsfx Ac Tet

Condition: used, Year of construction: 2021, 1 unit of METALLKRAFT HSBM 2020-20 SB press brake Bjdpozvc Hvjfx Ac Tjwt Color: as shown in the pictures, according to the images and inspection Year of manufacture: 2021 Machine number: 3772920 Dimensions L/W/H: 260 x 60 x 145 cm Condition: used Payment method: prepayment by bank transfer Shipping: Self-collection only – No shipping is offered for this item!

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, ATM Model: ATM Brillant 255 ATM Brillant 255 Cut-off Machine 400V Metallography Laboratory 2019 Description: For sale is a professional cut-off machine ATM Brillant 255 – Year of manufacture 04/2019 Industrial unit designed for precise material sectioning in metallography, laboratory, and materials testing applications. The machine comes with a base cabinet and integrated coolant system. Several suitable cut-off wheels are included (see photos). Very robust professional quality Technical Data (as per nameplate): Model: Brillant 255 Year of manufacture: 04/2019 Manufacturer: ATM GmbH Electrical Data: Voltage: 400 V (three-phase) Frequency: 50 Hz Power: 12.5 kVA Fuse protection: 32 A Mechanical Data: Cut-off wheel: Ø 400 mm Max. wheel speed: approx. 3050 rpm Wheel bore: 32 mm The machine is mounted on a base cabinet with coolant tank Dimensions: Width: approx. 120 cm Bwodpfxozizp As Ac Tst Depth: approx. 80 cm Height: approx. 150 cm Weight: approx. 450 kg Condition: Used Scope of delivery: (See photo) (Specifications and technical data subject to change and errors!) For further questions, please feel free to contact us by phone.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, machine/vehicle number: WRE-200920166278FL, CNC Milling Plotter CNC-1325 5.5 kW Working area: 1300x2500, Z-300 mm - DSP NK 105G2 controller with proprietary processor, allowing parameter changes during machine operation - Modern software for easy creation of 2D, 2.5D, and 3D files from images - Brushless spindle, industrial-grade bearings, water-cooled, 5.5 kW (24,000 rpm) - Digital drives with rack and pinion transmission (X, Y axes) - Helical rack gears Bsdpfxoy Au Eas Ac Tswt - Z axis driven by TBI 25mm ball screw - Chip extraction brush - Welded steel frame - Automatic tool length calibration sensor - WIWIN-25mm linear rail guides - Vacuum table with 4 suction zones - BUSCH-250 vacuum pump - Oil mist tool cooling system - Automatic tool changer, 5.5 kW ATC spindle - Chiller unit for ATC spindle cooling The machine is in excellent condition, used only occasionally. Sold complete with vacuum pump. For further information please call: Piotr Żołnierczyk, tel. 606 666 023.

Condition: used, Year of construction: 2009, functionality: fully functional, Dimensions of the grommet opening Max: 1.600 x 600 mm Max. weight : 1,100 kg/m Min. weight per piece : 30 kg Suitable for: : 1,000 x 300 mm Bwedpfx Ajzp D R Nec Tot

Year of construction: 2014, condition: ready for operation (used), product length (max.): 750 mm, number of axes: 2, This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us. • Axis configuration: • Rotary indexing axis (C-axis/table) • Linear axes per machining unit: typically X/Z (some units may include Y) • Total axis count: configuration-dependent (usually 6+ overall) • Rotary table: • Indexing type: NC-controlled Bsdpfezwcc Hex Ac Towt • Indexing accuracy: high-precision (seconds range) • Number of stations: layout-dependent (e.g., 6–12) • Table drive: direct drive (DD160) • Machining units: • Operations: drilling, tapping, milling, boring • Spindle type: motorized spindles • Spindle speed: high-speed production range (application-specific) • Spindle orientation: radial/axial depending on station • Workpiece capacity: • Max workpiece diameter: approx. 320 mm • Max machining length: approx. 750 mm • Control system: • CNC: Siemens / Fanuc (configuration-dependent) • PLC-based automation • Machine features: • Integrated clamping systems • Cycle-time optimized for series production • Application: • High-volume serial production • Automotive / industrial components • Dedicated part machining (not flexible like a machining center) Additional equipment • Automatic loading/unloading (automation)

Year of construction: 2020, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: 4760025, MACHINE DESCRIPTION Special drive concept Multi-axis Profiroll CNC/AC control Two-slide design Graphical user interface Process visualization Data management Operator guidance Integrated workpiece handling The PRI 120 CNC/AC is a newly developed internal gear back-rolling machine for rolling back angles onto the tooth flanks of existing internal gears. The innovative machine concept is based on over 60 years of experience in the development and manufacture of thread, profile, and gear rolling machines in Bad Düben. The machine’s base frame is a ribbed, torsionally rigid machine bed made of cast iron, which minimizes vibrations. In particular, the use of state-of-the-art proportional valve technology in conjunction with the PROFIROLL CNC control enables optimal process control of the rolling process. The control system, in combination with the backlash-free roller guide system, guarantees the highest precision and repeatability in the positioning of the rolling slide and, thus, of the tool. The innovative handling system, in conjunction with the rolling process, allows for the shortest cycle times. TECHNICAL DATA / PARAMETERS Workpiece diameter min./max. (mm) = 60/120 Bwodpfxsznkz So Ac Tjt Workpiece width, min./max. = 10/40 Tool mounting length (mm) = 50 Connection value (kW/A) = 16/63 Width (mm) = 3600 Depth (mm) = 3600 Height (mm) = 2680 Weight (kg) = 5700

Condition: used, functionality: fully functional, Oil mist extraction for CNC machines, Agfa / ABSOLENT separator filter Fan power: 0.63 kW Inlet diameter: 160 mm Capacity up to 500 m3/h New main filter cartridge The Agfa / Absolent filter is one of the most efficient oil mist and oil fume filters in the world. It has very low maintenance requirements and can operate for several years without filter replacement, resulting in very low operating costs. Due to its design and large filter surface area, it offers both a long service life and consistently high separation efficiency. Thanks to its design, the filter can operate continuously and without interruption. The liquid collects at the bottom of the filter and can be reused. Bwjdpszva Tmofx Ac Tst

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. Bwjdpfex Rut Tjx Ac Tet In-Feed Cross Transfers. Out-Feed Cross Transfers.

Condition: new, functionality: fully functional, Hydraulic alligator shear – 250 kN -> €4,400.00 Bjdpfx Aszx S Axec Towt Hydraulic alligator shear for professional cutting of metal and scrap. Robust steel construction, high cutting performance, and reliable continuous operation. With a maximum shearing force of 250 kN, a shearing frequency of 10–15 cuts/min, and a maximum blade opening of 160 mm. Shearing length 300 mm, drive power 5.5 kW. Ideal for scrap yards, recycling, metal processing, and industrial applications. Technical data: Shearing force: 250 kN Shearing frequency: 10–15 cuts/min Operating pressure: 15 MPa Blade opening: max. 160 mm Shearing length: 300 mm Motor power: 5.5 kW Dimensions: 1,200 × 980 × 1,200 mm Cable stripping machine GM-918KOF Cable stripping machine GM-918KOF -> €1,390.00 High-performance cable stripping machine for efficient processing of copper and aluminum cables. The GM-918KOF impresses with its robust design, easy operation, and a processing speed of up to 30 m/min. Suitable for cable diameters from 1.5 to 50 mm. With a 3 kW motor and mobile design, it is ideal for workshops, scrap dealers, recycling plants, and electricians. Technical data: Performance: up to 30 m/min Motor power: 3 kW Cable diameter: 1.5–50 mm Dimensions: 700 × 560 × 860 mm Weight: 116 kg Cable stripping machine GM-120-2 Cable stripping machine GM-120-2 -> €2,600.00 Professional cable stripping machine for fast and clean processing of thick copper and aluminum cables. The GM-120-2 processes cables with a diameter of 1–120 mm and is particularly suitable for large quantities of cables and industrial applications. With a 2.2 kW drive and 9 + 2 blades, it enables efficient and precise cable processing. Technical data: Motor power: 2.2 kW Cable diameter: 1–120 mm Blades: 9 + 2 pieces Suitable for: Copper and aluminum cables Application: Recycling, scrap yards, cable processing, and industry

Condition: ready for operation (used), - USED - PILLAR-TYPE DRILLING MACHINE POWER SUPPLY: 400V-50Hz MAX DRILLING DIAMETER: 25 mm SPINDLE: CM3 TABLE SIZE: 350 x 350 mm WEIGHT: 250 Kg Bedpfxjzxu Nus Ac Tswt OVERALL DIMENSIONS: 550 x 850 x 1700 mm NOTE: ROTARY TABLE WITH CLAMP

Year of construction: 1997, condition: used, Various metalworking machines are available as a package. 1) Sigg TR 60 glass bead blasting machine, year of manufacture: 1997, max. operating pressure: 8bar, with fan and compressor receiver unit. 2) Rema DP 07 grinding/polishing machine, motor power: 0.22kW/0.37kW, voltage: 380V. 3) Double-ended grinding machine. 4) Weiler lathe. An on-site inspection is possible. Bjdpjzxr R Nefx Ac Towt

Year of construction: 2016, condition: ready for operation (used), Precision Mechanical Machine Vise manufactured in 2016. This TRIGO SCS 120-250 features reversible jaws with a jaw width of 120 mm and a trapezoidal spindle drive mechanism. It offers versatile mounting configurations for horizontal, vertical, or lateral clamping. If you are looking to get high-quality clamping capabilities, consider the TRIGO SCS 120-250 machine we have for sale. Contact us for further details. - Equipment Type: Precision Mechanical Machine Vise / Clamping System- Model / Jaw Type: SCS 120 / Grip Reversible Jaws (Type 87.120)- Jaw Width: 120 mm- Drive Mechanism: Trapezoidal spindle with hex socket drive- Mounting Configuration: Horizontal, vertical, or lateral clamping capable- Year of manufacture unknown Bwodpfezulb Hjx Ac Tjt

Year of construction: 2019, condition: like new (used), functionality: fully functional, machine/vehicle number: P13.19W3479.01, MAYFRAN CENTRIFUGE VBU 300 400V/50Hz 0.55kW 1.29A Inlet diameter 400mm Equipped with SEW Motor DRN80MK4, manufactured in 2019, and a speed inductive sensor. The machine is almost unused, with original paint and no signs of wear. Complete with steel frame, RAL 5010 color. Fully operational machine, requiring only wiring. Bwedpfx Aezky Awsc Tot Available for testing. Frame dimensions: 1580x560x1680 (WxLxH) Footprint dimensions: 1580x680x1680 (WxLxH) Centrifuge inlet height from the ground: 2300, inlet diameter 400, equipped with a steel protection net. Outlet diameter: 200mm - Current height approx. 1000 - Maximum height approx. 1465

Year of construction: 2022, condition: new, functionality: fully functional, Automatic press loading – double infeed unit + 5-axis manipulator Complete automation solution for the automatic feeding, loading, unloading, and transfer of sheet metal parts in mechanical and hydraulic presses. The installation consists of a QF-LJZ600 double infeed/stacking unit in combination with a QF-5045-S6-5 5-axis manipulator with a 5 kg load capacity. This combination is ideally suited for automating existing presses and can be used for, among other things: • Automatic loading of a mechanical or hydraulic press as an alternative to manual loading • Automatic unloading of the pressed product • Unmanned or operator-assisted production • Transferring a product from one press to a subsequent press • Pick & place applications • Turning and repositioning products • Stacking finished products • Automating multiple consecutive pressing operations Double infeed/stacking unit, type QF-LJZ600 Automatic double-station system for feeding individual sheet metal parts/blanks to the manipulator. Key specifications: • Type: QF-LJZ600 / QFLJZ600×600 • Design: double station • Maximum sheet size: approx. 600 × 600 mm • Minimum sheet size: approx. 60 × 100 mm • Stack height: approx. 300–500 mm • Maximum load capacity: approx. 1,600 kg • Positioning accuracy: ± 0.2 mm • Production speed: up to approx. 12 cycles/minute, depending on the product and application • Connection: 380 V, 3-phase, 50/60 Hz • Power: approx. 2 kW • Suitable for, among others, steel, aluminum, and copper The dual-station design allows a new stack of material to be prepared while production continues from the other station, thereby minimizing downtime during material changes. 5-axis press manipulator, type QF-5045-S6-5 Servo-driven manipulator, specially designed for automating pressing operations. Key specifications: • Type: QF-5045-S6-5 • 5 servo-driven axes • Maximum load capacity: 5 kg • Equipped with fixture/vacuum pad/gripper • Programmable movements and trajectories • Absolute servo systems with position memory • Positioning accuracy: approx. ± 0.2 mm • Production speed: up to approx. 15 cycles/minute, depending on the application Bedpfxozx T Dqo Ac Towt • Different products and movements can be programmed • Suitable for various gripping systems, including vacuum, pneumatic, and magnetic grippers Application for unmanned press production The installation can be integrated with an existing mechanical or hydraulic press. The sheet metal parts are automatically fed from the stack. The 5-axis manipulator picks up the product, positions it in the press, and can automatically remove the product after the pressing operation. Depending on the application, this can be used to create a fully automated or operator-assisted production cell. A possible configuration is, for example: Sheet stack → double infeed unit → manipulator → press → finished product Transfer from press to press Another interesting application is automating a production process with two or more existing presses. The manipulator can remove a product after the first pressing operation and automatically position it in a second press. General The installation was newly purchased in 2022 but has not been used. The installation is offered as a combination of an infeed/stacking unit and a 5-axis manipulator.

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Bwedpfx Aex Ruudjc Tet Gripper Feed measuring system. Infeed and outfeed Cross Transfers.

Year of construction: 2009, condition: ready for operation (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 410 mm, controller manufacturer: SIEMENS, controller model: 840D SL Sinumerik, overall weight: 20,000 kg, total height: 2,600 mm, spindle motor power: 45,000 W, product length (max.): 5,200 mm, spindle speed (max.): 4,000 rpm, table load: 4,000 kg, number of axes: 5, This 5-axis HABRAMA PPSM 2200 was manufactured in 2009. It features a robust workbench of 390 x 3750 mm, supporting a maximum table load of 4000 kg. The grinding head offers a drive power of 45 kW and a spindle speed of up to 4000 rpm. With a total power consumption of 100 kVA and a weight of 20,000 kg, this machine ensures precision and efficiency for complex grinding tasks. Contact us for more information about this machine. • Axes and travels Bwedpszvx U Aofx Ac Tjt • C-axis: +30° / -30° • B-axis: +20° / -20° • U-axis: 105 mm • W-axis: 125 mm • B2-axis: +20° / -20° • Worktable • Workbench size: 390 x 3750 mm • Feed speeds • X-axis: 21 m/min • Y-axis: 10 m/min • Z-axis: 6 m/min • C-axis: 2 m/min • B-axis: 6 m/min • U-axis: 4 m/min • W-axis: 4 m/min • B2-axis: 6 m/min • Grinding head • Grinding wheel mount: 100 mm H5 • Programmable constant cutting speed: 10–80 m/s • Grinding wheel type: ceramic or resin bonded • Max. grinding wheel width: 101 mm • Grinding wheel diameter: 210–400 mm • Grinding wheel bore: 152.4 mm (6") • Grinding range: up to module 22; custom profiles freely programmable • Total machine power consumption: 100 kVA Additional equipment • Hybrid clamping device/plates (workholding) • Coolant system approx. 4000 liters with integrated deep-bed filter

Year of construction: 2017, condition: used, functionality: fully functional, electrically heated Bwsdpfx Acezkg Tis Tet Operating temperature: max. 150°C (Can optionally be increased by raising the power, after prior consultation) Internal dimensions: 1,400 x 1,300 x 1,600 mm (W x D x H) Heating capacity: 12 kW Connected load: 12.6 kVA