Used hydraulic presses single column for sale (68)

Condition: used, Year of construction: 1982, Technical details: Ksdpfx Asrdlgijdtjwt pressure: 2,5 t

Condition: good (used), Year of construction: 1988, table width: 900 mm, Pressure: 160 t Stroke: 500 mm Table size: 900 x 630 mm Kwodpfx Adsya D E Njtjt Floor clearance: 800 mm Downward speed: 200 mm/sec Upward speed: 125 mm/sec Total power requirement: 17 kW Machine weight approx.: 7 t

Condition: good (used), Year of construction: 1994, throat depth: 360 mm, table width: 630 mm, table length: 1,250 mm, Pressure: 250 t Kjdpfx Aeya D A Usdtjwt Throat depth: 360 mm Table size: 1250 x 630 mm Table diameter: 250 mm Ram clamping surface: 850 x 450 mm Installation height: 800 mm Piston stroke: up to 500 mm Piston diameter: 400/360 mm Ram speed downward: 200 mm/sec Ram speed upward: 110 mm/sec Total power requirement: 20.5 kW Machine weight approx.: 8 t

Condition: used, Year of construction: 1982, Technical details: Kedpfeu Nfmyox Adtewt pressure: 16 t stroke: 250 mm throat: 270 mm dayligth: ca. 400 mm table surface area: 800 x 500 mm boring diameter: Ø 50 mm ram surface area: 220 x 360 mm mortise hole in ram: Ø 40 mm table height over floor: 970 mm voltage: 380 / 50 Hz V control voltage: 220 V / 50 Hz total power requirement: 3,0 kW weight of the machine ca.: 2,3 t dimension machine xH: 1,8 x 1,5 x 2,72 m Press frame in robust welded construction. Adjustment of the operating mode via switch: inching, two-hand, foot or continuous operation with feed Press has a piece counter on the side with overload protection (pressure relief valve) with cutting shock damping Light curtain SICK optical electronics (can be repaired optionally) *

Condition: used, Technical details: pressure: 40 t throat: 365 mm distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 0,45 m/sec ram speed - forward: 0,10 m/sec Kwedpfsu Nfuqjx Adtot ram surface area: 450 x 360 x 74 mm table surface area: 630 x 500 x 73 mm passage opening in table: Ø 205 mm table height over floor: 720 mm total power requirement: 13,0 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,7 x 1,1 x 3,0 m Other technical features: -trailing time: 443ms -trailing distance: 9mm -Last machine inspection: May 2020 valid for 1 year *

Condition: used, Year of construction: 1985, Technical details: Pressure: 3 t throat: 150 mm max. ram stroke: 280 mm daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: 355 mm clamping plate on table: 280 x 290 x 50 mm passage opening in table: Ø 100 mm ram speed - forward: 0,1 m/s ram speed - reverse: 0,3 m/s mortise hole in ram: Ø 20 x 40 mm height over floor: 800 mm total power requirement: 1,5 kW weight of the machine ca.: 370 kg dimension machine xH: 0,8x1,2x1,9 m The single column press stands on a lower table (welded steel plate) Operation via foot switch The press has been modified -intake for foil for punching device -punching device FIBRO (plastic disc with Ø 47,5mm for punching) Kjdpfx Adou Nfvbetjwt *

Condition: used, Technical details: Ksdsu Nfw Sjpfx Adtjwt pressure: 0,9 t daylight dimension : table/slide up: 350 mm throat: 295 mm ram diameter: 40 mm Table dimensions: 600 x 330 mm height over floor: 935 mm weight of the machine ca.: - t dimension machine xH: 1,2 x 0,8 x 2,1 m Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation *

Condition: used, Year of construction: 1981, Technical details: pressure: 30 t distance between columns: BxT: 600/450 mm daylight dimension : table/slide up: 650 mm ram stroke: ca. 600 / highspeed strokes mm table surface area: LxB: 500 x 700 x Ø 60 mm surface area of ram: 650 x 800 mm hydraulic-pressure: 170 bar air pressure - required: 4 - 6 bar total power requirement: 11 kW weight of the machine ca.: ca. 2,0 t dimension machine xH: 1,26 x 1,75 x 3,4 m Four-column press, hydraulic Possible applications: can be used as a deburring press Kjdpfxsu Nfmao Adtjwt Further technical features: - Table aperture 200x250mm - Opening in ram Ø 160mm - Passage in the column width 600 and depth 450mm - Operation via control panel Equipment: - Protective grille - Base plates *

Condition: used, Year of construction: 1978, Technical details: Pressure: 160 t max. ram stroke: 500 mm distance table/ram: max. 2880 mm ram speed - forward: 0,03 m/sec ram speed - reverse: 0,04 m/sec ram surface area: B: 1720 x H: 1000 mm ram diameter: Ø 259 mm ram hole: Mitten-Loch: Ø180 mm operating pressure: 260 atü bar total power requirement: 11,0 kW weight of the machine ca.: 18,8 t dimension machine xH: 7,5 x 1,6 x 1,6 m HYDRAULIC HORIZONTAL MULTI-PURPOSE PRESS TÜV test until 02/2024 Details of the counter frame: Size W: 1720 x H: 690mm Counter support U-support = Ø 225mm x depth = 450mm Manual horizontal displacement: max. length 2880mm Information on the guide cylinder: 2 cylinders opposite each other; size Ø230mm x length 3350mm, 7 cylinders divided by adjustment groove Ø 170x 50mm, can be moved manually with adjustment ring Information on the mounting bed: Steel construction, welded with 2 guide grooves 20mm; size LxWxH: 4000 x 1400 x 200mm Kwjdpfeu Nfq Ejx Adtet *

Condition: used, Year of construction: 1983, Technical details: Pressure: 160 t throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250x630x100 mm passage opening in table: 4x Ø 62mm mm ram speed - forward: 200 mm/s ram speed - reverse: 125 mm/S ram surface area: 450 x 850 mm mortise hole in ram: Ø 49 mm Kwodpfx Adou Nfvuotet height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m manual counter *

Condition: used, Technical details: Pressure: 2,3 t stroke: 280 mm throat: 155 mm max. ram stroke: Vorlauf: 0,08 m/sec Kedpfx Adou Nfwlotswt daylight dimension with clamping plate Slide/ up: 355 mm distance table/ram: max. 355 mm clamping plate on table: 280 x 280 mm passage opening in table: Ø 100 mm ram speed - forward: 0,08 m/s ram speed - reverse: 0,32 m/s mortise hole in ram: Ø 20 x 45 mm height over floor: 725 mm total power requirement: 1,1 kW weight of the machine ca.: 0,5 kg dimension machine xH: 0,6 x 0,7 x 1,6 m Press with mechanical 2-hand operation. Pressure test up to 2,3to performed. Good condition. *

Condition: used, Year of construction: 1991, Technical details: Pressure: 160 t stroke: 500 mm throat: 360 mm max. ram stroke: 500 mm distance table/ram: 800 mm clamping plate on table: 1250 x 630 x 100 mm passage opening in table: 4x D=62 mm ram speed - forward: 200 m/s ram speed - reverse: 125 m/s ram surface area: 450 x 850 mm mortise hole in ram: 49 mm height over floor: 810 mm total power requirement: 17 kW weight of the machine ca.: 7200 kg dimension machine xH: 2,1 x 1,4 x 3,4 m Kwedpfx Asw D Awmedtst manual counter *

Condition: used, Technical details: pressure: 25 t distance between columns: 360 mm stroke: 500 mm daylight dimension : table/slide up: 800 mm throat: 360 mm Ksdpfx Asu U D I Rodtjwt ram stroke: 500 mm ram speed - forward: 0,200 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 71 mm passage inside table: Ø 182 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 x 72 mm ram diameter: Ø 125 mm height over floor: 710 mm total power requirement: 12,5 kW weight of the machine ca.: 2,4 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel (and one-hand operation in set-up mode) Continuous and single stroke TÜV until *

Condition: used, Technical details: pressure: 25 t stroke: 500 mm Kwodevc Awxepfx Adtjt daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,45 m/s Table dimensions: 630 x 500 x 75 mm passage inside table: Ø 180 mm surface area of ram: 450 x 360 mm mortise hole in ram: Ø 32 mm height over floor: 710 mm total power requirement: 8,75 kW weight of the machine ca.: 2,2 t dimension machine xH: 1,7 x 1,1 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *

Condition: used, Year of construction: 1991, Technical details: pressure: 40 t daylight dimension : table/slide up: 450 mm throat: 375 mm ram stroke: max. 300 mm Table dimensions: 900 x 500 x 85 mm passage inside table: Ø 120 mm height over floor: 900 mm total power requirement: 15,0 kW weight of the machine ca.: 5,8 t dimension machine xH: 2,3 x 1,45 x 2,40 m further technical data: -size of the ram plate W: 900 x D: 500mm -pivot hole in ram Ø 40 x 75mm -Hydraulics: tank capacity approx. 500Liter; operating pressure 275 bar; pump capacity 22,9 l/min. Kwsdpfju Nfp Iox Adtst Two-hand operation and/or control panel *

Condition: used, Year of construction: 1960, Technical details: pressure: 10 t throat: 255 mm max. ram stroke: 400 mm ram speed - reverse: 0,180 m/sec. m/sec. ram speed - forward: 0,080 m/sec. m/sec daylight dimension : table/slide up: 630 mm daylight dimension : table/slide low: 230 mm table clamping surface:: 420 x 400 mm passage opening in table: 220 mm Kodpfx Adeu Nfudotjwt surface area of ram: 200 x 200 x 65 mm total power requirement: 1,6 kW weight of the machine ca.: 1,1 t dimension machine xH: 1,1 x 0,5 x 2,1 m

Condition: used, Technical details: pressure: 100 t daylight dimension : table/slide up: 800 mm throat: 360 mm ram stroke: 500 mm ram speed - forward: 200 m/s Kwedovc Ax Nopfx Adtet ram speed - reverse: 200 m/s Table dimensions: 750 x 560 x 90 mm passage inside table: Ø 26 mm clamping surface ram: BxT: 530 x 400 mm mortise hole in ram: Ø 50 mm cylinder diameter: Ø 250 mm height over floor: 720 mm total power requirement: 17,0 kW weight of the machine ca.: 5,5 t dimension machine xH: 1,8 x 1,2 x 3,2 m

Condition: used, Press capacity: 50 ton Throat depth: 265 mm Stroke: 250 mm Daylight: 400 mm Table surface area : 700 x 450 mm Slide area: 550 x 300 mm Table height over floor: 850 mm Approach speed: 32 mm / sec Kjdpewyplcofx Adtewt Working speed: 6,3 mm / sec Return speed: 42 mm / sec Required power: 4 kW Dimensions L x W x H: 1290 x 1160 x 2085 mm Weight of machine approx.: 1,75 ton

Condition: used, Year of construction: 1991, machine/vehicle number: 041-024/39, Press capacity: 63 ton Throat depth: 360 mm Stroke: 500 mm Daylight: 800 mm Table surface area : 750 x 560 mm Kwodpovai R Tefx Adtst Slide area: 630 x 400 Working speed: 60 mm / sec Return speed: 380 mm / sec Electrical connected load: 12,6 kW Dimensions L x W x H: 1.200 x 1.950 x 2.800 mm Weight of machine approx.: 4,3 ton

Condition: new, Year of construction: 2021, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices Kwsdpogrki Sofx Adtet For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Condition: refurbished (used), Year of construction: 2018, machine/vehicle number: DF0150, pressure:63 t passage width:700 mm stroke:500 mm Approx. weight (w/o operational materials):5,1 t Measurements L x W x H:ca. 1500 x1600 x 2995 mm Return Capacity:6 t Engine Output:11 kW Max Working height:700 mm Approaching Speed max. :140 mm/sec Pressure Speed:15 mm/sec. Travel:500 mm Kwedpfxjfhcc Uj Adtst Ram plate:600 x 540 mm Table size:750 x 600 mm Table height above ground level:850 mm Oil Tank Capacity:150 l Control voltage:24 V Frequency:50 Hz Siemens Control System:S7 1200 Monitor:Siemens 12 Zoll Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: new, Year of construction: 2019, pressure:100 t passage width:500 mm stroke:400 mm Approx. weight (w/o operational materials):5,5 t Measurements L x W x H:ca. 1300 x 2000 x 2750 mm Table size:750 x 600 mit T-Nuten mm Table height above ground level:850 mm Oil Tank Capacity:190 l Kjdpfx Adofu Nqxetjwt main cylinder:230 Ø mm Auxiliary cylinder:2 Stk - 50 x 30 Ø mm Auxiliary guidance:2 Stk - 50 Ø stk. Engine Output:11 kW :23 Lt./min. Approach Speed:110 mm/sec Pressure Speed:9 mm/sec Return Speed:200 mm/sec Ram plate:750 x 600 mit T-Nuten mm pre-run valve:NG.63 Stk Painting:Lichtgrau & Dunkelgrau Siemens Control System:S7 1200 Monitor:Siemens 7 Zoll Light sensors sick:750 + 150 mm Control Set-up operation:manuell ohne Lichtsensor Automatic control:mit Lichtsensor Special feature: When operating at 260bar the machine reaches a pressure level of 70 tons.

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t Kedpfefxyhfjx Adtowt stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm table height:850 mm :200 l

Condition: used, Year of construction: 2001, Technical details: pressure: 250 t throat: 360 mm Kodpjxna Uzefx Adtowt distance table/ram: 800 mm max. ram stroke: 500 mm ram speed - reverse: 390 mm/sec. ram speed - forward: 450 mm/sec. hydraulic-pressure: 280 bar connected load: 43 kW work speed: 11....50 mm/s operating pressure: 20 MPa total power requirement: 20,5 kW weight of the machine ca.: 17 t dimension machine xH: 3,9 x 1,9 x 4,0 m

Condition: used, Technical details: pressure: 40 t distance between columns: - mm stroke: 500 mm throat: 360 mm distance table/ram: max. 800 mm daylight dimension : table/slide up: 600 mm ram stroke: 500 mm ram speed - forward: 0,100 m/s ram speed - reverse: 0,450 m/s Kedpew Smuksfx Adtswt Table dimensions: 750 x 500 mm passage inside table: 200 mm surface area of ram: 360 x 450 x 72 mm mortise hole in ram: 40 x 75 mm height over floor: 700 mm total power requirement: 13 kW weight of the machine ca.: 3,2 t dimension machine xH: 1,75 x 1,15 x 2,95 m Operation via two-hand control panel. (and one-hand operation) *