Used heavy-duty shelves for sale (193)

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, load capacity per storage section: 11,200 kg, shelf height: 5,100 mm, shelf length: 14,400 mm, overall weight: 173,600 kg, 1) Overview / Short Description Mobile pallet racking system (movable shelving) with two blocks for high-density storage, requiring only a single service aisle. Reference floor area: approx. 350 m². Application: space optimization, pallet storage with mixed items. 2) Configuration & Capacity Block 1: 4 racks × 4 rows × 4 spaces × 4 levels → Pallets per level: 4×4×4 = 64 → total 64×4 = 256 pallets Block 2: 6 racks × (3 rows × 4 spaces + 1 row × 3 spaces) × 4 levels → per rack 15 spaces/level → 90 per level → total 90×4 = 360 pallets Total system: 256 + 360 = 616 pallets 3) Technical Specifications • Bay width: 3600 mm • Permissible shelf load: 2800 kg • Permissible bay load: 8400 kg • Beam type: BBX 140/50/15 mm • Top of 1st beam: 1180 mm • Top of 2nd beam: 2330 mm • Top of 3rd beam: 3480 mm • Drive: electric 230/400 V, 50 Hz • Floor rails: need to be newly procured • Safety equipment: light barrier sensors Gkjdpfjw Uac Tjx Aayof • Pallet formats: Euro pallet (EUR 1200×800 mm) • Rack height: 5100 mm 4) Condition & Maintenance The system has been regularly serviced and maintained, and is in very good condition.

Condition: excellent (used), Year of construction: 2019, load capacity per storage section: 600 kg, For sale: WEMA grates in perfect condition - 1800 pieces - weight: 20 kg - dimensions: 99.5 cm / 88.3 cm - mesh size: 35/35 mm Godpfx Ajxmkzpeayskf

Condition: new, High quality grating supports with high load capacities, low priced alternative for grating - new -. Prices on request! Manufacturer: Delta Shelving Type: Manta Mesh Standard width: 885mm (for a 2,70m truss then 3 supports are needed = 2.655mm) 1335mm Frame depths: 1,05m 1,10 1,20m Other depths on request! Uniformly distributed load: between 250 and 1.500kg Standard (price applies to the standard version): 1.000kg, i.e. also per pallet Grid size: 50 x 100 or 25x100mm Please also indicate which type of beam (truss type) you have when making an inquiry! So whether box profile (or IPE beam) 50 or 40mm, or whether you have trusses with step. Advantages: no sharp edges 200% safety factor - independent of the rack beams Can be tested for permissible deflection and structural failure Wide range of standard sizes and load capacities MantaMESH is our market leading wire mesh shelving solution. MantaMESH delivers certainty with more than 70% open area and a 200% safety factor that exceeds the requirements for ANSI MH26.2 - 2007, NFPA 13 and the FM Global Approval Standard for ESFR Sprinklers. Compatible with ANSI MH 26.2 - 2007 Manufactured in Germany Pre-welded seamed support channels Pre-galvanized finish Maximum deflection independent of rack beams: 1100 mm deep: 6.67 mm at 1000 kg load Load at structural failure independent of support beams: 1100 mm deep: 2000 kg Mesh has more than 70% open area Gjdpfxeiuvxbe Aayskf Example configuration - we will be happy to create a configuration for your application!!! Depth 1102mm width 881 mm 4 pre-welded support channels 50x100mm mesh size 1000 kg UDL independent of the support beams Front: fold 30mm outwards Rear: Fold outside 30mm downwards Item weight 9.43kg

Condition: ready for operation (used), Year of construction: 2016, Support profile: IPE 180, upright load per upright side: 4.8t, cantilever arm load: 1.03t, arm length: 600mm. For the storage of heavy, bulky materials and goods, universally applicable in halls, for manual or automatic operation, stationary or mobile installation possible, single-sided or double-sided racks, bolted cantilever arms, robust design, bolted upright construction, bolting system: support profiles are bolted with longitudinal ties to form rack rows and braced with cross ties in every 4th rack bay. An on-site inspection is possible, the rack has already been dismantled. Gsdpfow U Uagox Aayokf

Condition: excellent (used), Year of construction: 2023, total height: 2,000 mm, total width: 1,100 mm, Suffel racking system 50 frames 2000mm x 1100mm x 85mm Godpfx Aew Np Rcoayskf 150 beams 3600mm x 100mm Shelf panels 38mm Bay load capacity 5,320 kg with a buckling length of 1,400mm Pictures show the scope without the connecting elements. Frames and beams have been covered with tarpaulin.

Condition: excellent (used), 250 pieces of heavy-duty grating 72 x 114 cm Used goods, very good condition, see pictures Hot-dip galvanized Weight load: approx. 450 kg/m². Dimensions: 720 x 1140 mm Mesh width: 20 x 30 mm Support bar height: 45 mm Material thickness of support bar: 3 mm Negotiable price: € 38 net per piece from stock Larger quantities on request! Numerous gratings with different mesh widths and support bars available! Goods are in stock. Transport and assembly possible on request. Inspection possible at any time by arrangement. Gkodpfxotuvb As Aayof Further information on request. Always over 5000 linear meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in the technical data, information and prices as well as prior sale! See our terms and conditions, all prices excl. VAT ex warehouse.)

Condition: excellent (used), total height: 6,300 mm, shelf height: 6,300 mm, support length: 2,700 mm, 24.3 linear meters of pallet racking from the manufacturer: META / Thyssen, model: MultiPAL N Very good condition, inspected annually and repaired as needed. The offer includes: 10 uprights 6.3m x 100cm (height x depth), 64 crossbeams 270cm, and 8 crossbeams 1.8m, as well as the locking pins. This results in 5 storage levels per rack bay, including the floor level. This results in up to: 130 EPAL storage spaces and approximately 24.3 linear meters of racking. Bay load 9t and compartment load 2350kg. Extra quantities are generally possible; simply request and state your requirements. Over 700 linear meters of this system are available. Gkedpfx Aaev Db Tzsyof Optional accessories such as mesh shelves, upright protection, etc. are available for an additional charge. Price net plus VAT. Price includes professional disassembly, packaging, and loading by our team using a forklift. Delivery via freight forwarder throughout Europe is possible for an additional charge.

Condition: good (used), Gemac shelving system type Normafix, approx. 1000 meters available Size 131 x 120 x 230 cm Uprights powder coated blue Shelves galvanized Clear shelf width 1310 mm Shelf depth 1200 mm Shelf height 2300 mm 7 shelves each shelf load 200 KG Gkjdpfx Aaogxpqpeyof Bay load 1400 KG approx 750 pieces available The price refers to 13,10 meter 22 uprights 70 shelves incl. securing and fastening devices

Condition: new, Year of construction: 2025, Pallet racking, 2 – 7 m high, crossbeams/traverses available in lengths of 1.80 m / 2.70 m / 3.60 m, 1,000 kg per pallet – Brand New – Prices ex works / per unit (net)! Sale / Transport from Serbia is only practical if your order volume fills a full or nearly full truckload! Delivery times upon request. CE certification available Frame depth: 1.10 m Frame bracing: bolted Location: Serbia Frames: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Vertical frame 2000*1100 2.00 30.00 €46.50 2 Vertical frame 2500*1100 2.00 37.50 €58.00 3 Vertical frame 3000*1100 2.00 45.00 €70.30 4 Vertical frame 3500*1100 2.00 52.50 €82.70 5 Vertical frame 4000*1100 2.00 60.00 €93.00 6 Vertical frame 4500*1100 2.00 67.50 €105.40 7 Vertical frame 5000*1100 2.00 75.00 €117.75 8 Vertical frame 5500*1100 2.00 82.50 €128.20 9 Vertical frame 6000*1100 2.00 90.00 €140.50 10 Vertical frame 6500*1100 2.00 97.50 €152.90 11 Vertical frame 7000*1100 2.00 105.00 €164.30 Gkedpfx Aou Spu Tsayof Beams: NO. DESCRIPTION SIZE (mm) THICKNESS (mm) WEIGHT (kg) UNIT EUR 1 Beam 150*50*3600 2.50 29.60 €46.00 2 Beam 120*40*2700 2.00 15.50 €24.40 3 Beam 120*40*1850 2.00 11.10 €17.90

Condition: ready for operation (used), Year of construction: 2008, Includes (1) 12x upright 2C815-80x50, 1825mm, RAL-2001 red orange, max. load per pair: 2.26t (2) 352x upright 2X1115-110x50, 2700mm, RAL-2001 red orange, max. load per pair: 3.0t (3) 78x shelf frame M80 5500x1100mm, RAL-5003 sapphire blue, already dismantled, on-site inspection is possible. Gedpfxjum U Srj Aayskf

Condition: used, Beams 3,100 mm, 200 pieces or alternatively Beams 2,800 mm, 200 pieces Gsdsuc T Enepfx Aayokf Uprights 1,050 mm x approx. H 8.5–10 m, 15 pieces The number of beams can be increased for an extra charge. Loading facility available.

Condition: new, RackGuard collision protection - Shelf leg protection Protects rack legs from lateral and frontal impacts impacts and scratches caused by work vehicles. New, see pictures. Material MEMAPLEX Tested impact energy 1,000 joules (corresponds, for example, to a 2.85 t forklift x 3 km/h) Height 40cm | Color yellow Price: € 24.00 net per piece from stock RackGuard for other manufacturer profiles on request! Goods are in stock. Transportation and assembly possible on request. Viewing possible at any time by appointment. Further information on request. Over 5000 running meters of pallet racking from numerous manufacturers in stock. (Subject to changes and errors in technical data, specifications and prices as well as prior sale! See our GTC, all prices excl. VAT ex stock) Gjdpfx Aaerfa Npoyskf

Condition: like new (used), Year of construction: 2025, Cantilever rack with roof support: Hot-dip galvanized screw system Scope of delivery: 7 rack supports, height 4,230 mm with foot section, usable depth 1,200 mm 21 cantilevers with 1,200 mm usable depth, with deflector 7 roof supports with 1,500 mm projection, pre-drilled for on-site roof construction (*Without wooden purlins and trapezoidal sheets for the roof construction) Including longitudinal and diagonal braces for 1,900 mm stand spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand 2,700 kg plus roof, wind and snow loads (Maximum snow load 1.85 kN/m² and wind load zone 2) - Load capacity per cantilever arm 900 kg - including roof support (Maximum snow load 1.85 kN/m² and wind load zone 2) - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand with a depth of 1,200 mm, with deflectors = 4 storage levels one above the other - Including longitudinal and diagonal braces with 1,900 mm axle spacing - Shelf length: 11,500 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Gkedpfxjmhhy No Aayjf Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. The subsurface must be made of concrete, level, dowel-capable and able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits required are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: new, Year of construction: 2025, machine/vehicle number: EAN0729389556525, total length: 82,200 mm, shelf height: 5,000 mm, support length: 3,300 mm, shelf length: 13,700 mm, frame height: 5,000 mm, load per truss pair (max.): 3,250 kg, frame width: 1,100 mm, number of shelf rows: 6, 2 single-row pallet racks + 2 double-row pallet racks (8 x M50113313-4), each 13.7 m long, 5 m high, 1.1 m deep, each with 4 bays, 3.3 m wide, each with 3 beam levels, compartment load capacity 3250 kg. - 30 frames (RM5011 - RAL5019) - 80 base plates, shimming material, bolt set - 20 spacers/connectors for double rows (ZAbh20) - 120 floor anchors (ZZBA1210) - 144 single beams (T33135 - RAL2008) - 0 collision/ramp protection barriers (ZRS40901) - 6 load capacity signs (BSMcP) Frames are bolted, not pre-assembled. Gkedpfx Aov Uq Dkjayjf Freight / Delivery: - up to 20 working days after receipt of payment - free delivery to building site / assembly location - unloading from truck to be carried out by buyer using own lifting equipment - Deliveries are made to the entire territory of the Federal Republic of Germany, except islands! Deliveries to EU countries by individual agreement only.

Condition: good (used), approx. 250x stanchion racks / storage racks / stacking racks, approx. 1.98 x 1.40 x 2.45m - second-hand - : Price per piece ex location: only 155.-€ (net)! Manufacturer: unknown Type: unknown Year of construction: unknown Load capacity: unknown Interior dimensions: 180 x 139 x 225 External dimensions: 198 x 140 x 245 Own weight: approx. 150 kg Load capacity: approx. 500 kg (no guarantee) Load capacity: approx. 1000 kg (no guarantee) Stackability: 3-fold Base material: Plastic Each unit consists of: - 2 removable side panels - 3-piece plastic base - Base profile Gsdpfx Aou Himrsayokf - Stiffening strut (red rods 3x) Condition: good Available: immediately Location: 72379 Hechingen

Condition: like new (used), 🧰 Product Details • Condition: as new Gkedpfjxcxlnsx Aayjf • Color: galvanized • External dimensions: 100 x 134 x 4 cm • Internal clearance: 93.5 cm • Load capacity: 1000 kg/m² • Weight: approx. 37 kg • Mesh size: 4.5 x 6.5 cm 💰 Price €39 net, excl. VAT. • Quantity discount: on request • Shipping: Europe-wide on request • Delivery time: available immediately • Inspection and collection: possible anytime by appointment Over 5,000 linear meters of pallet racks from various manufacturers permanently in stock (Technical data, specifications, and prices subject to change and errors excepted, prior sale reserved! See our GTC, all prices excl. VAT ex stock.)

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Gedemhh Dtspfx Aayjkf - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever racking: Screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights Height 4,160 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth, standard Longitudinal and diagonal braces for 4,000 mm shelf length (spacing 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Gsdpfxjfdkb Tj Aayskf Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Base section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The base must be concrete, level and suitable for dowels and be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any official approvals that may be required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm Gkedpfx Asmhh Dhoaysf - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable Gsdpfx Aeguk Dkeayokf - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gkedpfemhh Ansx Aaysf - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm Godpoguk Dvsfx Aayjkf - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Gksdpfx Asmhh Dzoaysf - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 2.56 m with base section 1.0 m usable depth (1.2 m total depth) 12 cantilever arms with 1.0 m usable depth Longitudinal and diagonal braces for 4 m shelf length (spacing 1.3 m) Fastening material (screws, nuts and washers) (*No paint damage!) Net price on collection: € 1,490.00 plus VAT. Delivery possible for an additional charge Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 2,560 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) Gsdpfx Aajguk A Heyjkf - With assembly instructions and load plates C4 according to DIN standard - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. The substrate must be made of concrete, be level and suitable for dowels and be able to bear the acting loads. The customer is responsible for checking and ensuring the ground conditions and load-bearing capacity as well as any official approvals required. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.

Condition: as good as new (ex-display), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 shelf uprights height 4,200 mm with base section 1,200 mm usable depth 12 cantilever arms with 1,200 mm usable depth Longitudinal and diagonal braces for 1,300 mm upright center distance (4,000 mm shelf length) Godpfx Aemhhypoayekf Fastening material (screws, nuts and washers) - (*Delivery or collection in approx. 1 - 2 weeks) - (*No damage to paintwork!) - (*No damaged components!) - (*Replacement parts can be reordered and extended at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Net price: € 1,990.00 plus VAT. Detailed description: - Sturdy steel construction made of IPE profiles (screw system) - Surface painted in RAL 7016 (anthracite) - Shelf height 4,200 mm - Load capacity per upright 2,200 kg - Foot section and cantilever arms with 1,200 mm usable depth - Cantilever arms height-adjustable in 100 mm increments - 3 screw-on cantilever arms per upright, standard (= 4 storage levels) - Load capacity per cantilever arm 740 kg - Including longitudinal and diagonal bracing for 1,300 mm spacing - Shelf length = 4,000 mm - Including fixing material (without floor anchors) - With assembly instructions and load plates C4 according to DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with notification prior to delivery. The material is sensibly packed to enable easy unloading. Delivery can be made in approx. 1 - 2 weeks after receipt of order. For outdoor installation, the load-bearing capacity is reduced by the wind and snow load. The surface must be concrete, level and suitable for dowels and must be able to bear the loads. The customer must check and ensure that the ground conditions and load-bearing capacity as well as any necessary official approvals are in place. The shelf stands must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the employers' liability insurance association, it is recommended that the uprights on the uppermost storage level protrude at least 500 mm from the top edge of the uprights.