Condition: used, • Frame bender (Alu/Thermix) maximum dimensions 2.2 x 4.0 meters • Year of manufacture: 2005 • With printer for profile labeling Bodpjw Upqgsfx Adxolp • Price on request

Condition: used, Suction lifter load capacity: 220 kg Bodpfsxcvh Tex Adxslp System with two sliding bridges and two lifting motors. Rail length: approx. 25,500 mm System width: approx. 6,500 mm Height from floor to running rail: approx. 3,700 mm.

Year of construction: 2019, condition: refurbished (used), machine/vehicle number: DF0137, pressure:120 t table length:600 mm table width:600 mm stroke max.:400 mm dimensions:1070 x 2340 x 2800 mm weight:4,2 t pre-running speed:10 mm/sec :26 mm/sec :200 l Oil cooling (electric):1,5 kW (max) table height:875 mm Working height from to:500 mm diameter of piston:230 mm Bledpfx Aoffamtodxep total power requirement:15 kW pump capacity:24 Lt./sec Pressure power:300 bar :76 mm :650 mm capacity of ejector in table:20 t :150 mm Recommended oil:46er

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Autom. IGU Glass Production Line, h=1,6 m Bsdjxf Hm Sopfx Adxslp Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: excellent (used), Year of construction: 2006, operating hours: 35,435 h, functionality: fully functional, total length: 5,940 mm, total width: 1,800 mm, total height: 2,400 mm, year of last overhaul: 2023, Completely overhauled by the main dealer with genuine parts in 2023. Was hardly used, and looked after throughout. The machine has been hardly used and it is fully operational and ready to go. Blodpfevw At Aex Adxsp Transport is not included, but can be arranged for a fee. Subject to location.

Condition: like new (used), Year of construction: 1999, functionality: fully functional, machine/vehicle number: GG108F5658, The machine has been used very little and is in very good condition; the conveyor belts are like new, with no remarks regarding the machine’s operation. Blsdpfxoxtaz Ee Adxjp

Condition: good (used), Water conditioner for insulating glass production Ostmose plant Bledpfxet Et I Ao Adxjp

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic, C- Dosing unit for 2-component silicone (grey), The dosing unit is well maintained and stored. Bsdpfx Ador Hcbyexelp

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: MB440, Machine data: Manufacturer: Rjukan Metall Model: Masterbend MB440 Year of manufacture: 2001 Blodsxdwphopfx Adxsp This machine can process all common spacer profiles (aluminum, stainless steel, Chromatech ultra / TGI) using a single tool (without conversion). The machine bends three corners and assembles one corner with a connector. The unit is fully functional (a video can be provided upon request) and is available immediately. Collection only in 92224 Amberg, no shipping. Inspection possible by prior appointment.

Condition: used, Year of construction: 2010, BOTTERO COMBINED CUTTING LINE Blodpfoxn Nxcox Adxjp BOTTERO 341 BCS-J - Year: 2008 Max Dimensions: 6000 x 3210 mm Thickness: 2-25 mm | 2 + 0.38 PVB + 2 mm (545 VMXE-37) Description: Straight and shaped cutting table for monolithic glass with tilting table, sheet lifting arms, belts for transporting sheets, 3 + 1 breakout bars, LOW-E removal wheel, interconnection module for optimization with the Office. Fixed table with belts for transporting sheets between monolithic and laminated processing. BOTTERO 545 VMXE-37 - Year: 2010 Max Dimensions: 3800 x 3210 mm Thickness: 2 + 0.38 PVB + 2 mm Description: Straight cutting table for laminated glass with three operation modes: Manual - Semi/Automatic. Features: Super-fast heating lamp, breakout, separation, blade cycle, crosspiece rotation, LOW-E removal wheel, interconnection module for optimization with the Office, and sheet descent arms at the end of the cycle.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, Vitro-Wash 16 V washer MTT-V 16/36 loading station year 2024 3600 kg 45 kW Bledpfjwz Elbsx Adxop 3/N/PE - 50Hz 400V 6 bar, 20L/min

Condition: excellent (used), Year of construction: 2021, temperature: 1,000 °C, energy consumption: 10 kWh, Laboratory furnace / Glass tempering furnace Bjdpfoxcb Hnox Adxslp Max temperature: 1000°C

Condition: new, Year of construction: 2025, functionality: fully functional, CLAY LEVELING MACHINE - Vertical adjustment with hand crank Bsdpfsxhhrbox Adxolp - Roller drive operated by 0.55kW electric motor - Integrated inverter for speed control - 230Vac power supply

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic Bedpfx Aor Hcafodxolp A-Dosiereinheit für Polysulfid Die Dosiereinheit ist gut gewartet und eingelagert.

Year of construction: 2021, condition: like new (used), functionality: fully functional, Vertical infeed transport - Vertical 2600 mm washing machine with drying - Tilting table (behind the washing machine) - Horizontal outfeed transport Pos. 1 Loading station, 250kg With the help of the suction frame, the sheets are taken off the glass rack and they are placed vertically on the tilting table in front of the washing machine. Differences in inclination can be compensated by tilting of the suction frame. The suction frame has a rotating function to collect short formats in upright position and to place them down on the long edge. Light crane Trolley crane with a lift system travelling on rails by hand, which are standing on steel supports. Lift Electrical lifting and lowering, horizontal turning and tilting of loads. Generation of vacuum via vacuum pump system with check and display of the vacuum power. A central operation desk with integrated control buttons allows easy signal activation of the single functions. In case of pressure loss in the dangerous area, it is displayed and acoustical signal is given. Pos. 2 Vertical Inlet Transport WM The vertical transport serves as inlet transport in front of the washing machine. In horizontal position, the glass sheets are placed on Vulcan transport rollers. In vertical position transport rollers with Perumaan rings are driven via screw wheels. The transport rollers are arranged in drag bearings placed on a solid welded frame. Small glass sheets are placed manually on the transport frame. After placing the glass sheet, the transport is activated by push button. Pos. 3 Vertical Washing Machine with Drying The washing machine body, washing chambers, recirculation vats and the drying nozzles are made entirely of stainless steel. The rubber rings of the transport rollers are resistant to cutting oil. Flat jet spraying nozzles in the pre-rinsing section are fed with city water. Coarse dirt particles removed are directly led into the drain. This reduces contamination of the DI-water circuit for the washing machine. The washing machine is equipped with energy and water saving cascade system. Pre-rinsing section with Flat jet spraying nozzles Washing section with 3 pairs of brushes, 3 vats and 3 pumps Acid section with 1 pair of brushes, 1 vat and 1 pump Drying section with 2 pairs of drying nozzles provide dry edges. Pos. 4 Vertical Inspection Transport with glass Activation Section The transport serves as Activation Section for the glass surface and as Inspection and Storage Transport before the Tilting Table. Drive by a geared motor, A.C., frequency controlled. All the rollers are arranged in drag bearings with a single drive operating pairs of spiral-toothed gear wheels. Blodpotwphwsfx Adxep The transport rollers are vulcanized and ground. Pos. 5 Tilting Table with Horizontal Transport and Vertical Inspection

Condition: good (used), Dosing unit / automatic sealing machine Lenhardt/Bystronic, B- Dosing unit for 2-component silicone (black), Bsdpfxjr Hca Ro Adxolp The dosing unit is well maintained and stored.

Condition: used, Length: about 400mm, Bljdpfx Adeh D E Uwsxsp Width: about 400mm, Height: approx. 750mm, Weight: 15kg, Use in compressed air systems

Condition: like new (used), Demonstration device for customers and trade fair presentation Bsdpjlz N A Ejfx Adxjlp Heat loss palpable (by laying hands on different insulating glass) Device can be moved by wheels H = 1000 mm L = 1700 mm B = 600 mm Weight: 120 kg

Year of construction: 1994, condition: good (used), Molecular filling system / diagonal filling weight 520 kg Bledjir Efuspfx Adxjp

Condition: used, Length: about 400mm, Width: about 400mm, Height: approx. 750mm, Weight: 15kg, Bjdpfx Aeh D E T Dedxjlp Use in compressed air systems

Year of construction: 1995, condition: good (used), Load capacity: 15000kg, Support: 600 mm, Large dimensions: 6000 x 3210 mm, Length: 5830mm, Bsdpfx Aotza Insdxjlp Width: 1200 mm, height: 3200 mm.

Condition: good (used), Year of construction: 2003, System with water basin and pumps, Total depth with water basin 1400 mm Total length: 8100 mm, Bsdpfst Ah Acsx Adxjlp Height: 2500 mm, Working direction: right to left

Condition: excellent (used), Stainless steel version, Length: 1400mm Width: 1200mm Height: 1900mm Weight: about 250kg Bjdpohvyzwjfx Adxslp

Condition: good (used), Support: 2 x 300 mm, Supplied without the yellow glass loading fork, Height: 3100 mm, Width: 1140 mm, Length: 3810 mm Bjdpjtza Tdofx Adxslp

Condition: ready for operation (used), Inkjet printer for frame bending machine Length: 800mm Width: 1000mm Bedpfx Ajhzgtusdxjlp Height: 1900mm Weight: about 100kg