Oil and water elimination system

Beko

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: GM-1400H, total width: 3,000 mm, total length: 5,000 mm, total height: 3,250 mm, type of input current: three-phase, energy consumption: 60 kWh, input current: 80 A, workpiece weight (max.): 2,720 kg, power: 48 kW (65.26 HP), workpiece height (max.): 950 mm, warranty duration: 1 months, working range: 319 mm, number of chambers: 3, Equipment: adjustable chassis, Conveyors are produced in such a way that they will not scratch the glass and leave no stains. The machine is made of steel and aluminum materials. Thanks to specially designed water sprays and brushes, the glasses comes out completely free from oils, stains and dust and cleaned. Angles of water nozzles will be adjustable. Conveyor rollers are produced of Ø 55 mm vulcanized rubber . Induction hardened gears are used in transmission gears. There will be 3 Washing Cabins, pre-washing, washing and rinsing washing system. In the pre-washing section, the upper and lower surfaces of the glass are washed with high-pressure spray nozzles. In the same cabin ,will be compressed air to the upper surface of the glass with air knife and the water will be completely cleansed. Thanks to this process, the glasses will go into the wash without entering the brush washing compartment, free from their dirt. There are 6 Brushes (Ø 120 mm.) in the Washing Machine and they will be able to wash laminated glasses. 2 of the brushes will be in the inlet (pre-wash) and 4 in the outlet (rinse-wash). there are brushes in total, 2 piece of them at the entrance and 4 pieces at the exit. 2 of the brushes will be suitable for laminated glass washing. the other 4 brushes will be for normal standard use. Gtjdpfsr Ak Exjx Admjt Features of brushes to wash laminated glass is ; Bristle material will be 6.6 P.A. The bristle diameter will be 0.15mm. The bristle length will be between 30-35 mm. Brush shaft will be produced of ASI 304L quality stainless material. During washing, the brush suitable for the laminated coated glass, whose properties are given above, will come into contact with the surface of the glass. To the other part of the glass will come into contact standard glass washing brush. The washing and air drying section will have an elevator system with a 350 mm opening and closing structure for maintenance and cleaning. Thanks to the elevator, the glass thickness (3-19 mm) can be adjusted easily. The speed of the conveyors will be adjustable between 0 m/min and 5 m/min. There will be a sound insulation cabinet in the drying fan. 1 piece of G4 filter and 1 piece of F7 filter will be at the air inlet of the drying fan . The filters will be of standard size and can be changed and will be 592*592*20 mm square type. 23. Thanks to the powerful air knives, the glasses will come to the exit conveyor dry. The height of the air knives will be adjustable. All pipes and hoses in the machine will be in a matte color to prevent algae formation in daylight. 26. Digital displays and many electronic equipment will be Delta or Schneider brand. There will be a stop sensor at the exit of the conveyor to prevent the glass coming from the machine from falling to the ground. There will be lighting system in the washing exit area for quality control from the bottoms and top of the conveyor towards the glasses. These lightnings will have the ability to be switched on and off separately. There are 3 separate water tanks in the machine. There will be an overflow water line that will prevent the water in the water tanks from overflowing.

Condition: used, • Horizontal glass washing machine in very good, well-maintained condition • 2 brushes, top and bottom, very good condition • Roller spacing 110 mm • Minimum glass dimensions 120 x 300 mm • Maximum washing width 1300 mm • External machine dimensions • Length 4500 mm, width 2000 mm, height 1250 mm • Inlet – 1000 mm, outlet – 1400 mm Gjdowl Dkqepfx Admjtt • Machine width – 2300 mm • Price upon request

Condition: excellent (used), Year of construction: 2016, CMS Tecnocut Easyline Cutting Area / Axis Movement X-Axis: 2.000 mm Godew Dpzrepfx Admstt Y-Axis: 4.000 mm Z-Axis: 220 mm Options: - 3-Axis Cutting Head - Sanddoser - 22,5 kW High Pressure Pump Easypump

Condition: used, Year of construction: 2016, Operating hours: 29,800 h Control: Siemens 840D Technical data: Centre distance: 1,000 mm Swing over bed: 430 mm Swing over cross slide: 220 mm Bed width: 350 mm Turning tool cross-section (height x width): 20 x 20 mm Spindle nose in accordance with DIN 55027: Size 6 Spindle diameter at front bearing: 110 mm Spindle bore: 80 mm Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1 - 3,600 rpm Rapid traverse X-axis: 10 m/min Rapid traverse Z-axis: 7 m/min Quill diameter: 70 mm Quill stroke: 150 mm Gtsdpfx Adjxqp Ezomjt Quill taper (internal): MK 5 Dimensions (LxWxH), approx.: 2,800 x 2,100 x 1,900 mm Weight, approx.: 3,300 kg

Condition: excellent (used), For sale: professional cutter and drill bit sharpener, model PP U3. Condition: very good, complete unit ready for operation. Included in the set: • Set of grinding wheels • Adjustable angular tool holder • Workshop lamp with flexible arm • Keys and clamping elements Specifications: • For sharpening cylindrical and spiral end mills • For sharpening step and cylindrical drills • Wheel linear speed up to 35 meters per second • Maximum noise level: 66 dB • Machine weight: 41 kg Godpfx Adexdh Hqjmjtt Solid, stable construction—ideal for precise tool machining. A reliable solution for tool rooms, CNC workshops, and machine shops.

Condition: used, Length: about 400mm, Gsdpfxjh D E Uwj Admott Width: about 400mm, Height: approx. 750mm, Weight: 15kg, Use in compressed air systems