Used Dryer for sale (129)

Condition: used, PARKER HIROSS compressed air dryer for compressor systems Refrigeration dryer with water-cooled aftercooler for removing water vapor and cooling compressed air or gases. 1 aftercooler type WFN009 DHH16 Standard air flow rate: 540 m3/h = 9000 liters/min. Operating pressure air: max. 16 bar Housing length: 1020 mm Housing diameter: Ø 105 mm Threaded connection air: G 2" Threaded connection water: G 3/4" Weight of the aftercooler: 11 kg Dimensions of the aftercooler L x W x H 1030 x 850 x 200 mm + 1 piece water separator type CSP 008 Normal volume flow: 480 m3/h = 8000 liters/min. Operating pressure: max. 16 bar Threaded connection: G 2" - Filter housing made of aluminum + 1 piece HIROSS SAC 120 mechanical condensate separator Threaded connections: R 1/2" Coln U Sjdzqn Uotgegt Operating pressure: 16 bar Volume: 0.8 liters - Works without loss of compressed air everything mounted as shown in the pictures Height upright mounted 2000 mm Weight complete approx. 40 kg 2 identical units available

Condition: good (used), Year of construction: 2003, Functionality: fully functional, pressure: 12 bar, overall weight: 400 kg, power: 4.3 kW (5.85 HP), nominal voltage: 400 V, high performance refrigeration dryer air dryer 22m3/min ingersoll-rand type: TS220 SS year of manufacture: 2003 air flow: max 22000 l/min; max pressure: 12 bar refrigerant: 407C gas - 3.5 kg mains voltage: 400v 50Hz 7.5 A connection: DN80 machine dimensions: Cgslsrfyrpen U Stget length: 1010 width: 1500 height: 1310 weight: 400 kg Ambient temperature 2°C - 50°C Maximum inlet temperature 60°C IP classification IP 44 standard

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: APF271056, total width: 960 mm, total length: 1,770 mm, total height: 2,590 mm, overall weight: 1,720 kg, operating pressure: 10 bar, pressure dew point: -40 °C, warranty duration: 24 months, input voltage: 400 V, The dryers in the BD 360+ to 1260+ series are heat-regenerating adsorption dryers that remove moisture from the compressed air via an adsorption process. All dryers in this series are equipped with an innovative Smart Cycle control algorithm as standard. This results in significant energy savings at partial load without the need to add an expensive option. All components are mounted on a common base frame, fully wired and ready for installation, with the vessel and pipework generously sized to minimize pressure drop in the dryer. The dryer can introduce dry air with a low pressure dew point of -40°C or -70°C (optional) into the compressed air system. Pre-configured including the following optional extras: - Pressure dew point sensor - Tank insulation Cgoln Ujt It N So Stgjt - Fan filter New goods with 24 months warranty from date of delivery. Optionally also available with installation and commissioning, ex warehouse Wettenberg.

Condition: good (used), Year of construction: 2012, Functionality: fully functional, compressed air connection: 13 bar, type of input current: AC, pressure: 13 bar, overall weight: 44 kg, operating pressure: 13 bar, input voltage: 230 V, ambient temperature (max.): 43 °C, pressure (max.): 13 bar, frequency: 50 Hz, nominal power: 844 kW (1,147.52 HP), Atlas Copco FX6 refrigeration dryer Good used condition Cgelsuntryon U Stgjt

Condition: used, Year of construction: 2014, Refrigeration dryer Donaldson DV 1800 AP max. pressure 16bar Motor 3,1 KW Year of construction 2014 Cjln U Stsq Sp A Esgegt The offer is aimed exclusively at traders within the meaning of §14 BGB No sale to private individuals!

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: APF271056, TECHNICAL DETAILS Dryer type Type: Heat-regenerating adsorption dryer Mode of operation: Moisture removal through adsorption process Control: Smart cycle control algorithm for energy saving at partial load Performance and capacity Pressure dew point: -40 °C (optionally -70 °C) Pressure drop: Minimized by generous design of tank and piping Celn U Sju Rdfketgogt Assembly and installation Base frame: All components assembled and fully wired, ready for installation EQUIPMENT Pressure dew point sensor Tank insulation Fan filter

Condition: excellent (used), Year of construction: 2010, Functionality: fully functional, Dryer Kaeser TH371. Year of construction 2010 with 37.10 m3/min. Coln U Sovgaxnotgogt

Condition: used, Year of construction: 2005, Functionality: fully functional, volume flow: 1.8 m³/h, total width: 800 mm, total length: 1,000 mm, total height: 1,450 mm, pressure: 16 bar, overall weight: 300 kg, BEKO Drypoint RA300 refrigeration dryer 300m3/h, +3°C /ct1933/ Manufacturer: BEKO DRYPOINT Type: RA300 Year of manufacture: 2005 connection:dn80 pn16 Air delivery: 1800 m3/h, +3°C Operating pressure: 4-14 bar level-controlled BEKOMAT condensat drain Enclosure size: 1000x800x1410 mm Coln U Stst A Uwtjgegt Weight: 275 kg

Condition: reconditioned (used), Year of construction: 2007, Functionality: fully functional, machine/vehicle number: 70008248, Nominal volume flow 35 m³/h Operating pressure max 16 bar connected load 220V 1,1A Pipe connection 1/2". Bekomat condensate drain Control panel Cgslnsh U Da Ao U Stget weight approx. 23kg Operating instructions

Condition: excellent (used), Year of construction: 2015, Refrigeration dryer BOGE DS 95 Capacity 9.5 m3/min year of manufacture 2015, Cgelek Nb T Don U Stgot THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: new, Schneider exhibitor refrigeration dryer DK 600 SMART Cslnovap Ure U Stgsgt Condition: very good 3 good reasons for the Schneider DK 600 SMART refrigeration dryer 1. optimum air quality The Schneider SMART compressed air refrigeration dryers ensure ideal treatment of the compressed air, extend the service life of your compressed air tools and machines and reduce the maintenance costs of your compressed air system. 2. broad portfolio The portfolio, which is precisely matched to kW classes, offers the optimum refrigeration dryer for all compressed air systems. Whether in the small range from 350 l/min or for large systems up to 10,000 l/min, these Schneider refrigeration dryers represent the ideal dryer. 3. operational reliability Optimum and long-lasting work results thanks to compressed air reliably cooled to a pressure dew point of 3°C. This results from continuous operation with a stable dew point. Consistent quality of operational applications with compressed air is therefore permanently guaranteed. Benefits of the Schneider DK 350 SMART - DK 1825 SMART refrigeration dryer * Ideal protection of the DL line against corrosion * Space-saving inst. * Best operational reliability of production plants * Heat exchanger - High efficiency thanks to heat exchanger made of stainless steel plates Product description: * Simple control * Refrigerated compressed air dryer with 3°C pressure dew point for demanding tasks in continuous operation * With high-quality electronic level-controlled condensate drain as standard * Space-saving installation due to compact dimensions (not intended for wall mounting) Technical data Volume flow at pressure dew point +3°C at 7 bar 600 l/min Pressure loss 0.25 bar Weight 19 kg Dimensions (WxDxH) 493x350x450 mm Air outlet G 3/4 "a Power consumption 0.16 kW

Condition: new, Year of construction: 2024, machine/vehicle number: TR0067_TA8, New compressed air refrigeration dryer KAESER TA1A with energy-saving SECOTEC control. with electronically controlled condensate drain with cold storage Year of construction: 2023 Cgsln U Stshu R Hnjgjt Technical data: Flow rate: 0.80 m³/min Pressure dew point: 3°C Overpressure: 3 to 16 bar Ambient temperature: +3°C to + 43°C max. Compressed air inlet temperature: + 55° C Compressed air connection: G 3/4" Dimension (W x D x H): 630 x 484 x 779 mm Weight: 80kg electrical supply: 230 V / 1 / 50 Hz Visit our business premises in Erlangen. You will find a large number of used and new compressors on over 450 square meters of exhibition space.

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, Premium refrigeration dryer Atlas Copco FD760VSD (frequency controlled) Coleudyr Ron U Stgjgt 45.60 m3/min flow rate.

Condition: used, TECHNICAL DETAILS - Drum diameter : 976 [mm] - Drum depth : 870 [mm] - Capacity : 34 [kg] - Electric motor : 0.75 [kW] - Reversing motor : 0.37 [kW] - Air flow : 20 [m³/min] - Air outlet : Φ 200 [mm] - Dryer width : 1022 [mm] - Dryer depth : 1180 [mm] Celn Usug U Rye Stgjgt - Dryer height : 1932 [mm] - Net weight : 324 [kg] Power supply - Voltage : 440 [V] - Frequency : 50 [Hz] - Heating : 36 [kW]

Condition: reconditioned (used), Year of construction: 1999, Functionality: fully functional, machine/vehicle number: 1.790.230.010, Serial number: 1266 Csln U Steh U A A Esgjgt Working pressure 18 bar Mains voltage 220V 2,0A

Year of construction: 2014, Condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 30 Cjlei Atudon U Stgegt CAPACITY 3 M3/MIN, YEAR OF PRODUCTION 2014 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 20 - 20 l/s - 1200 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 20 l/s Volume flow 1.20 l/min Volume flow 1200 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Cslnsufp Ans U Stgegt Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Condition: excellent (used), Year of construction: 2007, operating pressure: 11 bar, Adsorption dryer Atlas Copco CD520 with 31.20 m3/min Cgolnsqay R De U Stgjt

Year of construction: 2018, Condition: like new (used), REFRIGERATION DRYER AIRPRESS APX 24 OUTPUT 2.4 M3/MIN, Cjln U Soi Att Sotgegt YEAR OF PRODUCTION 2018 THE DEHUMIDIFIER IS FULLY FUNCTIONAL.

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 15 - 15 l/s - 900 l/min Condition: Very good BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Cgeln U Soufp Ahetgst Volume flow 15 l/s Volume flow 900 l/min Volume flow 0.9 m³/min Pressure dew point 3 °C Differential pressure 0.12 bar Power consumption 0.33 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 32 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.33 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with valve

Condition: like new (used), CONTEC-COMPRESSORS * * * * * * REFRIGERATION DRYER PARKER DOMNICK HUNTER CRD 0660 The PERFORMANCE of 11 M3/MIN. Celed Exrbsn U Stgogt YEAR of MANUFACTURE 2005, DRIER FULLY RECOVERED. HIGHEST SHELF PRICE AND QUALITY. FOR SALE I HAVE A GREATER NUMBER OF COMPRESSORS SCREW REFRIGERATION DRYER AND . INSTALMENT! CONTEC-COMPRESSORS * * * * * *

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FD 30 - 30 l/s - 1800 l/min Condition: Very good Cgolnsufp Aue U Stget BAFA-eligible: BAFA-eligible, but in combination with BAFA-eligible compressors Technical data: Volume flow 30 l/s Volume flow 1800 l/min Volume flow 1.8 m³/min Pressure dew point 3 °C Differential pressure 0.25 bar Power consumption 0.41 kW Operating voltage/frequency 230/50 V/Hz Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 1 °C Ambient temperature max. 46 °C Inlet temperature min. 5 °C Inlet temperature max. 60 °C Operating pressure min. 6 bar Operating pressure max. 14 bar Dimensions, weights and connections: Length/width/height 496/377/461 mm Net weight 34 kg Compressed air connections 3/4 " Scope of delivery * Dryer unit ready for connection on a steel base frame for foundationless installation installation. * Powder-coated sheet metal cladding with exhaust air openings, easily removable side panels. * Air drying unit with air/air and air/refrigerant aluminum block cooler Refrigerant: R 134a Filling: 0.48 kg * Water separator with electric condensate drain * Hermetically closed refrigeration circuit Refrigerant compressor, air-cooled condenser with fan, condenser pressure regulator Direct refrigerant injection with hot gas bypass valve * Dew point alarm as collective warning (potential-free contact) * Electronic control unit * Dew point temperature alarm symbol * Message symbol ambient temperature Optionally available * Spin

Year of construction: 2012, Condition: like new (used), CONTEC-KOMPRESORYCONTEC-KOMPRESORY BLOCKERDS DW17,2012 PRODUCTION YEAR,2012 EFFICIENCY 2,8M3/MIN. FULLY RIGHT.NET PRICE 3100,- GROSS PRICE 3813,- I HAVE MORE REFRIGERATION DEHUMIDIFIERS, SCREW COMPRESSORS AND WELDING EQUIPMENT ON SALE.MORE INFORMATION TEL. 603 244 888, 726 244 888.CONTEC-COMPRESSORS Cjlned Syxte U Stgegt

Condition: new, Exhibitor - Atlas Copco refrigeration dryer FX15 - 14 l/s - 840 l/min Condition: Very good Cgjln U Steufp A Ijget Technical data: Volume flow 14 l/s Volume flow 840 l/min Volume flow 0.84 m³/min Pressure dew point + 3 °C Differential pressure 0.250 bar Power consumption 0.190 kW Operating voltage/frequency 230/1/50 Refrigerant R513A Reference conditions: Operating pressure 7 bar Compressed air inlet temperature 35 °C Ambient temperature 25 °C Relative humidity at inlet 100 % Limit values: Ambient temperature min. 5 °C Ambient temperature max. 43 °C Inlet temperature min. 3 °C Inlet temperature max. 55 °C Operating pressure min. 6 bar Operating pressure max. 16 bar Dimensions, weights and connections: Length/width/height 493/350/450 mm Net weight 20 kg Compressed air connections 3/4 " Equipment features and special features The FX series refrigeration dryers offer a reliable, cost-effective and simple solution for anyone who requires high-quality compressed air for their production processes. To avoid condensation and thus the risk of corrosion and damage to systems and end products, the compressed air must be dry - which is exactly what the FX dryers are designed for. The FX dryer range is simple yet robust and reliable. It is a simple range that relies on proven technology, solid components and a straightforward design; these features combine to deliver a constant dew point and reliable performance at any volume flow - in almost any production application. Functional principle Refrigeration drying means that the compressed air is cooled, resulting in a large amount of water that must be separated from the air. After cooling and condensation, the compressed air is reheated to around room temperature so that no condensation forms on the outside of the pipe system. This heat exchange between incoming and outgoing compressed air also reduces the required cooling capacity of the refrigerant circuit. Cooling takes place via a closed refrigerant system. Direct refrigerant injection reacts immediately to a load change and a high-precision hot gas bypass valve ensures a constant temperature ratio

Condition: new, Exhibitor unit - Refrigeration dryer Cgsleufpzkon U Stget DRYPOINT® RA 50, the most economical way to dry compressed air - incl. level-controlled condensate drain BEKOMAT - Technical data: Volume flow (m³/h)* 51 Volume flow (m³/min)* 0.85 Volume flow ( l/min)* 850 Power consumption (kW) 0.22 Compressed air loss (deltap [g]) 0.08 Air connection G1/2 BSP-F Dimensions (mm / HxLxW) 740x345x420 Max. Max. compressed air inlet temperature (C°) 70 Min./max. operating pressure (bar [g]) 4/16 Min./max. ambient temperature (°C) 2/50 Electrical connection 230 V, 50-60 Hz, 1ph. The DRYPOINT® RA advantages at a glance * Best drying due to highly effective heat exchanger combination * Lowest pressure loss, even with varying loads * Excellent price-performance ratio * Highest efficiency, lowest energy consumption * BEKOMAT® inside * Environmentally friendly refrigerant DRYPOINT® RA: an investment that pays off Operating costs, not investment costs, determine the profitability of refrigeration dryers. Over an operating period of five years, only between 20 and 30 % of the total costs are accounted for by the pure investment. In contrast, 70 to 80 % is made up of running operating costs. One third each of these result from electricity costs, compressed air resistance in the system and compressed air losses due to leaks. The pressure drop at critical points must be compensated for by an increased compressor output and the associated additional energy requirement. With DRYPOINT® RA, these operating costs can be reduced by almost half over a period of five years. The return on investment calculation shows the full potential of the new generation of refrigeration dryers: the devices pay for themselves within just six months of operation.