Used bolster plates for sale (466)

Condition: used, Technical details: floor-plate length: 4015 mm plate width: 2000 mm plate height: 310 mm weight of the machine ca.: 5800 kg Cast steel plates T-slots according to DIN 650 a=25; h=62; b=51; c=25mm center stand T-slots= 250mm 16 pcs. countersunk holes Ø 33 + Ø 40 mm and 6 pcs. through holes Ø 120mm Prodpfeu N Drhsx Adzoa i.D. *

Condition: used, Year of construction: 1989, Technical details: table length: 1600 mm table width: 920 mm height over floor: 200 mm weight of the machine ca.: 0,69 t Clamping table with 4x through holes Ø 22 mm Material cast steel T-slot according to DIN 650: T-slot spacing 250mm Prjdou N Ebqspfx Adzea T-slot outer spacing (right and left) 120 mm a=22; h=38.5; b=40; c=18 mm T-slot length = 1380 mm *

Condition: used, Clamping plate, plate field, welding table, welding table, plate boring mill, straightening plate, tool holder -Intermediate plate: for hydraulic press, eccentric press, injection molding machine -with elongated holes -Clamping surface: 275 x 230 mm -Groove: 20 x 9 mm Podpfx Adec Nw Sqszora -Milled: from 2 sides -Dimensions: 330/275/H40 mm -Weight: 10 kg

Condition: used, total surface approx. 33,54 m² Podec S R H Nspfx Adzsra 6 plates 2,000 x 1,290 mm width of T-slots 30 mm thickness of the plates 95 mm weight approx. 1,700 kg per plate - price per plate -

Condition: used, Clamping plate, welding table, welding table, straightening plate Prodpfsb Hfafjx Adzja -Width: 995 mm -Length: 1000 mm -Height: 800 mm -with supporting ribs -Weight: 170 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 750 mm -Length: 1000 mm -Height: 850 mm -Surface: milled Prjdpjb Hfagsfx Adzoa -partly with threaded holes -Drawer -Plate thickness: 30 mm -with supporting ribs -Weight: 256 kg

Condition: used, Clamping plate, welding table, welding table, straightening plate -Width: 1500 mm -Length: 1500 mm -Height: 125 mm Predpfx Aob Hzggodzsa -Surface: good -Holes: Ø 50 mm -Transport dimensions: 1500/1500/H125 mm -Weight: 1500 kg

Condition: used, Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Plate: is scraped -Width: 298 mm -Length: 398 mm -Height: 65 mm -Plate thickness: 22 mm -Plate is with: support ribs -Number: 1x plates available -Price: per piece Prjdpfx Adodpyzvjzja -Dimensions: 398/298/H63 mm -Weight: 20 kg/piece

Condition: used, Clamping plate with T-slots and cross table, plate field, welding table, welding table, plate boring machine, T-slot plate -T-grooved plate comes from: from a milling machine -Travel: approx. 1200 mm Prodpfx Aoduiwwsdzoa -Width: 700 mm -Length: 2000 mm -Height: 510 mm -Plate thickness: mm -Table height: mm -Plate: is solid -Groove width: mm -Dimensions: 3030/850/H510 mm -Weight: approx. 1200 kg

Condition: good (used), Clamping plate with T slots, plate field, welding table, welding table, plate boring machine -Width: 945 mm -Length: 2990 mm -Height: 58 mm -Working height: 870 mm -Plate: with support ribs -Groove width: 24 mm -Center distance between the T-slots: 180 mm -Dimensions: 3605/950/H870 mm Pedpsb S Taqsfx Adzora -Weight: 2290 kg

Condition: used, dimensions 2,000 x 1,290 mm thickness of the plate 95 mm T - slots width 30 mm weight appro. 1,700 kg Pedpfxjn Tvhmj Adzjra

Condition: good (used), Cast iron bed - Floor Plate Useful surface (L x W x H): 3600 x 1200 x 300 mm 4 T-slots: width 44 x 26 mm Predpfxszmxqxo Adzsa Equipped with Levelling feet Weight: approx 3 T

Condition: used, Tilting Rotary Table Prodpszmxtgjfx Adzea Shelf diameter: Ø 300 mm Manual tilt vertically + horizontally Maxi vertically tilt: 90° Base/shelf height horizontal position: 250 mm Height in vertical 90° position: 400 mm Seating Surface: Length 450 mm x Depth 500 mm x Height 250 mm Weight: approx 200 kg

Condition: good (used), Clamping plate with T-slots, plate field, welding table, welding table, plate boring machine, T-slot plate, Prodpfx Adjkrgiqozoa -T-slot plate: clamping plate with solid base frame -Length: 3000 mm -Width: 2000 mm -Plate: with support ribs -Groove width: 28 mm -Groove spacing: 200 mm -Dimensions total: 3000/2000/H800 mm -Weight: 4500 kg

Condition: used, length 4800 mm width 3740 mm number 1 Thickness 300 mm Pjdpfx Aoyt Ry Hjdzjra Best view at 2 Platten 1200,-€/ m² The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, length 5200 mm width 2000 mm Thickness 400 mm number of T-slots 6 T-slot - width 32 mm The panel field consists of 5 panels totaling 52m². It can also be purchased individually. Price for 1 m² The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are Podpfsyt Rzwex Adzera possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, overall weight: 300 kg, LANG Clamping Tower 70850 with Grid Plates 75710 and Arbor Clamps 48155-125 2 towers with plates and arbor clamps are available! We offer a high-quality LANG Clamping Tower 70850 with matching Grid Plates 75710 and Arbor Clamps 48155-125. This clamping system is ideally suited for precise and efficient 5-axis machining as well as multi-sided machining on CNC machining centers. Technical data: Manufacturer: LANG Technik Type: Clamping Tower 70850 Accessories: 8 x Grid Plate 75710 Clamping system with grid hole pattern High repeatability Robust design for industrial use Pedpfsztzi Rex Adzsra Ideal for automated manufacturing and setup time optimization Condition: Used, technically perfect. Normal signs of wear and tear consistent with age and use. Scope of delivery: 1 x LANG Clamping Tower 70850 8 x LANG Grid Plates 75710 4 x Arbor Clamps 48155-125 The clamping tower enables optimal use of the machine's working area and increases productivity by machining multiple workpieces in a single setup. Inspection possible by appointment. Shipping or collection by arrangement.

Condition: good (used), Year of construction: 2000, Cast iron clamping plate, STOLLE GAP 900, year of manufacture approx. 2000. Pedpfxszu N Uko Adzjra Dimensions: Length 1500 mm, width 900 mm, height 100 mm, weight approx. 1000 kg. Longitudinal grooves for T-slot nuts M16. In good condition.

Condition: excellent (used), Year of construction: 2020, overall weight: 32,000 kg, total height: 450 mm, total length: 8,000 mm, total width: 4,000 mm, 10 units CFM Schiller Air Spring levelling system GRB 780 MD Load 7900 Kg each Air Spring Stiffness 770 N/mm Controller CFM LC 300 Very little used, new price EUR 200.000     Prodpfx Ajzw Eyzsdzsa Floorplate Length: 4000mm Floorplate Width: 2000mm Height: 450mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 28mm Weight a plate approx.: 8000kg Number of matching pieces: 4 Length: 8000mm Width: 4000mm Height: 450mm Weight: 32000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, LANG Embossing Station 52610 for Macro-Grip® Clamping Technology Offered is a LANG embossing station, type 52610, for preparing raw parts for the proven Macro-Grip® clamping system from LANG Technik. The embossing station enables the embossing of the clamping contour into raw materials, thus ensuring a positive, process-reliable workpiece clamping during 5-axis machining. Equipment: Manufacturer: LANG Technik Type: 52610, older version Embossing station for Macro-Grip® clamping technology Positive pre-embossing of raw parts High process reliability during machining Robust industrial design Simple and fast operation Advantages: Maximum holding forces with low clamping height Optimal accessibility for 5-axis machining Reduction of vibrations and workpiece movements Fast and reproducible workpiece preparation Ideal for raw materials in single-part and series production Application areas: CNC machining centers Tool and mold making Job manufacturing Single-part and series production 5-axis machining of raw parts Used, fully functional. Normal signs of wear and tear corresponding to age and use. Scope of delivery: LANG embossing station with clamping jaws Accessories according to photos or upon inspection Pedpezu Imfsfx Adzjra Inspection and functional test possible by arrangement. Shipping or pickup by agreement.

Condition: good (used), Siegmund System Perforated Grid Table incl. Silverline Profile Machining Station For sale is an extremely robust, combined industrial workstation designed for metalworking, jig construction, or precision profile manufacturing. The system is composed of top-tier premium components: 1. Siegmund System Perforated Grid Table (Base) - High-precision, solid welding and clamping table from the global market leader, Siegmund; highly resistant to distortion. - The perforated grid system (including perforations on the side panels) allows for the flexible and highly repeatable positioning of stops, clamping bolts, and angle brackets. 2. Silverline Clamping & Machining System (Superstructure) - Solid superstructure featuring precision linear guides for longitudinal movement. - Two parallel-mounted yellow motor heads (milling/drilling units) for simultaneous or sequential machining operations. - Three heavy-duty horizontal clamps secure workpieces firmly against the stops—ensuring rock-solid stability while protecting the material. 3. Convenient Pneumatic Control System - Ergonomic control panel at the front featuring a numbered 5-lever control system. - Selective control of individual pneumatic cylinders. - Integrated analog pressure gauge (manometer) and safety emergency stop switch. - Powerful central electric motor driving the mechanical/hydraulic systems. Predoztawgspfx Adzea "A complete solution from a single source: We would be happy to offer suitable bank financing for your project." komplett-konzept.leasingo.de Find more items—both new and used—in our shop! International shipping costs available upon request!

Condition: ready for operation (used), Year of construction: 2020, LANG Technik Macro-Grip / Quick-Point Clamping System Package 2 units available 1x LANG Macro-Grip 125 Vise, Type 47205 1x LANG Quick-Point 96 Single Plate, Type 45400 Psdpfx Ajzuz A Hsdzera 1x LANG Quick-Point 96 Grid Plate, Type 45763 1x LANG Quick-Point 96 Sub-base 100 mm, Type 44100 High-quality clamping technology package from LANG Technik for professional use on CNC machining centers. The system is ideally suited for 5-axis machining and, thanks to the modular Quick-Point zero-point clamping system, enables short setup times and high repeatability. Advantages: Precise and reproducible workpiece clamping Optimal accessibility in 5-axis machining Fast retooling thanks to Quick-Point zero-point technology Robust industrial design Compatible with other LANG components Condition: Used, fully functional. Normal signs of wear from ongoing production. Inspection possible by appointment. Shipping or pickup by arrangement.

Condition: used, Year of construction: 1988, plate width 2500 mm plate depth 4000 mm plate height 345 mm no. of flutes 11 2 weight of the machine ca. 7000 t Prjdpfjy Ty Rvsx Adzsa

Condition: good (used), Year of construction: 2001, overall weight: 8,500 kg, total height: 350 mm, total length: 5,000 mm, total width: 2,500 mm, plate height: 350 mm, plate width: 2,500 mm, plate length: 5,000 mm, T slotted bed plate STOLLE - DTR MACH-ID 9790 Make: STOLLE Type: DTR Year: 2001 Prjdpfx Aszw E Hzedzsa 8 units Bilz Airsprings Model 1-ED Diameter 271 mm load each unit 3000 Kg Levelling adjustment true sensor  Pneumatic Floorplate Length: 5000mm Floorplate Width: 2500mm Height: 350mm No. Of T-slots: 8 Distance from T to T-slot / Jump:250mm T -slot size: 36mm Weight a plate approx.: 8500kg Number of matching pieces: 1 Length: 5000mm Width: 2500mm Height: 350mm Weight: 8500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, 4 pieces of Matsuura H-Plus 630 machine pallets, 800 x 800 mm, with hydraulic feed Prsdpfx Adexn R Skszja