Used belt grinding machines for sale (132)

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, power: 4.4 kW (5.98 HP), Löser KS100 BA contact belt grinding machine, centerless for pipes and rods, used, with pneumatic belt tensioning, year of manufacture 1999, in very good condition Ibodpfxsqk Uyaj Akpsb

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding width: 150 mm, grinding height: 100 mm, type of input current: three-phase, input voltage: 400 V, Equipment: rotational speed infinitely variable, GREIF 7 station flat surface grinding machine, wet grinding, for square tubes and flat material, 7 belt grinding stations with 4 kW power each, frequency controlled at each station, each station can be swiveled by +-15° for cross grinding, max. grinding width 150 mm, max. grinding height 100 mm, diameter contact disc 200 mm, sanding belt dimensions 150 x 2500 mm, pneumatic belt tension, sanding belt oscillation, machine including return conveyor belt, including paper filter system with 1500 liter capacity. Ibsdpfxstq Twve Akpob Since the contact wheels are directly driven, this system could also be used for polishing or brushing. If desired, this system can also be offered completely overhauled.

Condition: used, Year of construction: 2002, machine/vehicle number: 2204, Universal radius metal belt grinder lot no. 24541 Technical data: - Sanding belt dimensions 2000 x 75 mm - Surface sanding opening 400 x 75 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels Isdsviudqspfx Akpobb - Sanding belt speed 30 m/sec. - Working height 960 mm - various sanding rollers Ø 25 , 30 , 39 , 45 , 57 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 125 kg

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you free of charge according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach. Ijdspugwijpfx Akpebb

Condition: good (used), Year of construction: 1990, Offer 14044 Technical data: - 2-fold lateral edge belt sanding device - Sanding belt dimensions approx. 620 x 20 mm - Sanding devices inclination adjustable by handwheel - Motor-driven support belt - Support belt dimensions approx. 2050 x 350 mm - Support belt inclination adjustable - Table height approx. 950 mm Iedjuk Dfcspfx Akpjbb - motorized Sanding dust extraction - Drive 400 V - Space requirement approx. W 1100 x H 1450 x D 950 mm - Weight approx. 200 kg

Condition: good (used), Year of construction: 1998, Offer 24339 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg Iodpfx Akst Uzxnepsbb - Contact rollers 33.7 , 42 , 48 mm

Condition: refurbished (used), functionality: fully functional, Löser centerless tube grinding machine - belt grinding machine - polishing machine - Cylindrical grinding machine Centerless tube grinding / polishing machine for workpieces with a minimum length of 1100mm. Isdpfetmqi Djx Akpjbb The machine was built in 1988 and was completely overhauled in 2012. The machine was converted for polishing and then only polished around 10,000 parts. The machine was no longer used after that. During the general overhaul, the motors, bearings and the entire control cabinet with the frequency converters were completely replaced. The machine can be used for both wet grinding and polishing. Wastewater treatment including pumps is not yet available. We can retrofit these for you according to customer requirements. The transport systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process pipe diameters from 10mm to 160mm. The grinding motors / polishing motors have an output of 7,5kW per station. The system can be viewed by appointment in our warehouse in D-63128 Dietzenbach.

Condition: new, Year of construction: 2026, functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, grinding belt width: 150 mm, grinding belt length: 7,000 mm, height adjustment type: electric, total height: 2,200 mm, total length: 3,550 mm, total width: 2,000 mm, overall weight: 870 kg, grinding length: 1,500 mm, workpiece weight (max.): 80 kg, extraction connection diameter: 180 mm, grinding width: 950 mm, rotational speed (max.): 1,435 rpm, space requirement height: 2,200 mm, space requirement length: 3,550 mm, space requirement width: 2,000 mm, table height adjustment: 500 mm, Equipment: documentation/manual, Long-belt sanding machine MS92-150 3-cornered sanding belt 150x7100 for manual sanding, matting and polishing. For processing steel, stainless steel and brass. The scope of delivery includes - Machine stand with connecting elements - Infinitely variable belt drive - Pneumatic belt tensioning and manual belt tracking regulation - Sanding unit with contact roller - Electric table lift - Flat machine table - Workpiece stop ruler on the machine table - Original equipment sanding belt - Operating instructions + manufacturer's declaration Iedotwb U Aopfx Akpjbb - CE version The stable machine frame in welded steel construction results in very smooth machine operation. The two machine stands are equipped with an offset so that longer parts than the machine table can be sanded. The sanding belt guide via 3 belt deflection rollers results in the largest possible open working area for the operator and therefore good working conditions, especially with hand sanding blocks. The belt is driven by a three-phase motor with a balanced belt drive roller. The belt has adjustable pneumatic belt tension. The dust collection device is dimensioned so that the sanding dust is collected and directed to the extraction nozzle when connected to an appropriate extraction system. The sanding unit is mounted on backlash-free roller guides to ensure effortless operation. The machine table can be easily and quickly adjusted to the correct workpiece height using the electromotive table lift. The table lift guide elements are maintenance-free. For loading, the table can be extended so far that workpieces do not have to be pushed under the sanding belt when loading. The electrical controls for the main functions are arranged in the middle of the machine for ease of use. Machine color: RAL 9001 cream white and RAL 5003 sapphire blue Switch cabinets and small housing in " light gray " The machine is supplied as standard with an original equipment belt (W x L) 150 x 7100 mm and a contact roller approx. 50° Shore for 150 mm belt width. Additional accessories: 3-axis table with integrated handling device for turning and swiveling the workpieces. The handling device is mounted in the center of the table under the insertion frame. To work with the handling device, the insertion frame is removed from the machine table. The handling device is equipped with four vacuum suction cups to hold the workpieces and consists of: The bearing with the rotary axis, on which a brake disk is mounted at the rear. The swivel device is attached to the front of the rotary axis. This can be locked at 0°, 22.5°, 45°, 67.5° and 90°. An additional locking disk is attached to the swivel head, which is used for fine adjustment of the workpieces to the sanding belt. The rotary and swivel axes are unlocked pneumatically using a foot switch, while the rotary axes are moved manually. Workpiece weight when used as a flat table with the insert frame in place = 80 daN Workpiece weight when using the handling device in relation to the clamping plate = 25 daN or 120 Nm in relation to the center of the rotary axis.

Condition: new, width of the strips 200 mm band length 1490 mm band speed 8.0 m/sec motor 400 Volt Iedpfx Akexaapvepjbb loading area 500 x 280 mm total power requirement 1.5 kW Dimensions (HxWxD) 750 x 600 x 340 mm MADE IN GERMANY Furnishing : - robust electric motor belt sander - strong drive motor - including sanding belt - including workpiece stop - manually adjustable deflection pulley - Machine base - Connection cable + plug - Instruction manual in German

Condition: good (used), Year of construction: 1995, Offer 24315 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment via hand wheels Iedpfot Stfhsx Akpsbb - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - 10 contact grinding rollers approx. Ø 10 + 18 + 22 + 24 mm - 28 + 33 + 36 + 48 + 60 + 68 mm

Condition: good (used), Year of construction: 1996, Offer 24337 Technical data: - Sanding belt dimensions 2000 x 100 mm - Surface sanding opening 400 x 100 mm Isdpovbfh Refx Akpobb - Support vice - angle adjustable 90° - 30 ° - Support fine adjustment by hand lever - Sanding belt speed 30 m/sec. - Contact wheel / sanding roll for approx. Ø 42 mm - Drive 400 V / 2880 rpm / 3 kW - Space requirement approx. W 700 x H approx. 1200 x D 1200 mm - Weight approx. 225 kg - various contact rollers

Condition: good (used), Year of construction: 1995, Offer 73066 Ibsdjw R Tcxspfx Akpjb Technical data: - Abrasive belt dimensions approx.: 2000 x 150 mm - Surface grinding opening approx.: 560 x 150 mm - Abrasive belt speed approx.: 30 m/sec - Contact wheel: W 150 / D 200 mm - Drive wheel: W 150 / D 200 mm - Drive: 400 V / 3 kW - Adjustable working height - Separate motorized dust extraction - Required space approx.: W 750 x H 1050 x D 1500 mm - Space requirement for extraction unit approx.: W 750 x H 1250 x D 750 mm - Weight approx.: 180 kg

Condition: new, Year of construction: 2026, width of the strips 50.0 mm band length 940 mm Ibedpjxaaxqefx Akpjb band speed 3.0 - 22 m/min turning speeds 1450 U/min tube diameter 16.0 - 114 mm radius 180 ° total power requirement 4.75 kW weight of the machine ca. 265 kg range L-W-H 1000 x 750 x 1300 mm Furnishing: - stationary pipe belt grinders - Automatic material feed with separate drive motor - Replacement sanding belts - Stepless speed adjustment - Manual adjustment of tube tension - Polish bent pipes up to 180" (angle). - Manual work possible without feed - CE mark / declaration of conformity

Condition: excellent (used), Support belt grinder Brand: Lehnert Contact wheel width: 50 mm Contact wheel diameter: 250 mm Belt size: 2000 x 50 mm Motor power: 1.5 kW 380 Volt Ibjdpfx Asyv A Dqokpsb 2830 rpm

Condition: new, Year of construction: 2024, neu 2024 5546 prompt, Zwischenverkauf v Polen 1730 € 1 150 mm 2.000 x 150 mm 200 x 150 x 42 ø mm 605 mm 3000 1/min 3.5 kW 1025 mm 600 mm 1000 mm 100 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable Iedpfxeynmw Ds Akpsbb - Simple and practical operation - Easy to adjust - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Condition: new, Year of construction: 2026, functionality: fully functional, total width: 2,000 mm, total height: 2,000 mm, total length: 1,620 mm, working width: 1,100 mm, overall weight: 1,000 kg, power: 12 kW (16.32 HP), input current: 20 A, sheet thickness (max.): 120 mm, sheet thickness steel (max.): 120 mm, Deburring up to 1100mm. Deburring of metal-cut parts up to 1100mm wide. Ibodpfx Astzfpkjkpsb DM1100 Z finishes and deburrs light metal sheets cut by laser, punching or shearing. This machine has a single wide belt station that can be used to deburr parts with a size of 50×50 mm and a width of up to 1100 mm. The DM1100 Z is also suitable for surface finishing, where it can be used with both standard sandpaper and non-woven/scotch belts. DM1100 Z Working capacity (mm) 1100x120 No. of belt stations (Z) 1 Sanding belt, dimensions (mm) 1100x1850 Sanding drum specifications Ø186mm Sanding belt speed (m/s) 8-22 Feed speed (m/min) 1.5-10 Sanding belt motor per head (kW) 11 Feed motor (kW) 0.18 Total power (kW) 12 Power consumption (A) 20 Rod suction connection per head (Ø mm) (1x) 152 Dimensions (mm) 1620x2000x2000 Weight (kg) 1000

Condition: new, Year of construction: 2026, CORMAK STU75 Metal Belt Grinder The CORMAK STU75 Metal Belt Grinder is an industrial belt grinding machine designed for a wide range of metal finishing applications, including surface grinding, edge finishing, and processing cylindrical components such as pipes and tubes. Thanks to its powerful motor, two-speed belt operation, and carefully engineered working system, the STU75 provides high efficiency, precision, and reliability for everyday industrial use. Key Features Adjustable belt speed: 14.5 / 29 m/s – allows the grinding speed to be matched to the material type and required surface finish quality. Quick belt and abrasive tool replacement – reduces setup times and improves workstation productivity. Grinding head adjustable for vertical and horizontal operation – provides excellent flexibility and enables machining of various workpieces at the optimal angle. Pipe vise with 0–30° angle adjustment – allows precise angled grinding of cylindrical components, ideal for pipe preparation before welding. Complete set of pipe rollers for different diameters – enables quick setup for grinding pipes with diameters up to 60.3 mm. Heavy-duty vibration-damping construction – improves grinding accuracy and operator comfort during extended operation. Construction and Technology The CORMAK STU75 belt grinder has been designed for versatile operation in demanding industrial environments. Equipped with a Ø200 mm rubber-coated drive wheel and a 120 × 90 mm sliding support with rollers, the machine ensures smooth belt guidance and consistent contact between the abrasive belt and the workpiece. The integrated roller guidance system combined with a spring-loaded belt tensioning mechanism provides safe, stable, and smooth operation of the sanding belt. The rigid construction minimizes vibration, improving both machining accuracy and working comfort. Precision and Performance The combination of a wide 75 × 2000 mm abrasive belt and two selectable grinding speeds ensures excellent performance for both heavy stock removal and fine finishing operations. The adjustable pipe vise and dedicated roller set enable precise tube grinding with repeatable results and stable workpiece positioning. Applications The universal CORMAK STU75 Metal Belt Grinder is suitable for: Manufacturing handrails, balustrades, and steel pipe structures Edge and surface preparation before welding or painting Metalworking departments, tool rooms, and industrial service workshops Small and medium-sized production lines Standard Equipment Ø200 mm rubber-coated drive wheel Sliding support with 120 × 90 mm rollers Pipe grinding vise with 0–30° angle adjustment Roller set for pipe diameters: 20 mm 21.3 mm 26.9 mm 33.7 mm 42.4 mm 48.3 mm 60.3 mm Abrasive belt 75 × 2000 mm Technical Specifications Belt speed 14.5 / 29 m/s Abrasive belt dimensions 75 × 2000 mm Power supply 400 V Motor power 2.2 kW Weight 110 kg Maximum pipe grinding diameter 60.3 mm Iedpfx Akevu Ukzjpjbb

Condition: used, Year of construction: 1991, width of the strips 150 mm band length 2.000 mm Ibjdpfx Aey Ty A Eekpjb motor 400 V loading area 450 x 160 mm total power requirement 4,0 kW dimensions of the machine ca. 1,10 x 0,70 x 1,15 m - Serial-No.: 200.184

Year of construction: 1988, condition: good (used), machine/vehicle number: D 05103, Item No. 13439 Technical data: Ijdpfxsk D Ewge Akpebb - Polishing wheel / grinding wheel dimensions: approx. 300 x 40 x 76 mm - Grinding belt dimensions: approx. 3500 x 50 mm - Contact wheel dimensions: 400 x 50 mm - Drive speed: 1450 rpm - Drive: 400 V / 1.8 kW - Space requirement: approx. W 1100 x H 2450 x D 800 mm - Weight: approx. 300 kg

Condition: good (used), Year of construction: 1999, Offer 22648 Technical data: - Sanding belt dimension approx. 2000 x 50 mm - grinding belt speed approx. 30 m/min Ijdpfx Akop H Tvxspebb - contact wheel B 50 / D 300 mm - drive wheel B 50 / D 200 mm - adjustable belt centering - drive 400 V / 2880 rpm / 5,5 kW - space requirement approx. W 500 x H 1000 x D 1400 mm - weight approx. 80 kg

Condition: used, Year of construction: 1992, used wide belt sander MS95-150 incl. conversion Technical data: Year of manufacture: 1992 Manufacturer: Johannsen The machine is under power and can be inspected by appointment! Table size approx.: 2360 x 950 mm Sanding belt height approx.: 1000 mm Max. sanding area: 2000 x 850 mm Passage under sanding belt: approx. 340 mm Throat approx.: 550 x 310 mm Belt speed: 11 + 22 m/sec Belt drive motor: 4 / 5.5 kW Belt dimensions: 150 x 7000 mm Ibedpfjyfga Tsx Akpeb Max. table load: 80 kg – Table may only be adjusted when unloaded – Extraction nozzle left, horizontal, D: 180 mm Required extraction capacity/h, min.: 2400 m³ Operating voltage: 400 V, 50 Hz Machine color: RAL 6011 reseda green Manually operated For processing steel, stainless steel, and brass Not suitable for aluminum and titanium Machine equipped as follows: Double-sided throat Pole-changeable belt drive motor Laminated wood table slats Contact roller sanding unit complete with rubber contact roller D 100 x 145, approx. 50° Sh Additional sanding shoe approx. 150 mm long with bracket for mounting in the U-bracket

Condition: used, Year of construction: 1995, Order No. 23066 Technical Specifications: Isdpfjwf Hppjx Akpjbb - Sanding belt dimensions approx. 2000 x 150 mm - Surface sanding aperture approx. 560 x 150 mm - Sanding belt speed approx. 30 m/sec. - Contact disc W 150 / D 200 mm - Drive disc W 150 / D 200 mm - Drive 400 V / 3 kW - Adjustable working height - Motorized dust extraction - Space requirement approx. W 750 x H 1050 x D 1500 mm - Weight approx. 120 kg

Condition: new, Year of construction: 2024, neu 2024 5544 prompt, Zwischenverkauf v Polen 1370 € 1 75 mm 2.000 x 75 mm 200 x 75 x 42 ø mm 605 mm 3000 1/min 3 kW 1025 mm 500 mm 1000 mm 76 kg Industrial belt grinder with following features: - Separate emergency stop - Motor brake - Standard - Reliable - Simple and practical operation - Easy to adjust Ijdjynmwwepfx Akpsbb - Quick belt change without tools - 5-year guarantee on the motor - Optimal safety

Year of construction: 1990, condition: good (used), machine/vehicle number: XXXX, Item No. 17415 Technical data: Ibjdpfx Akok D Dxfopsb - Sanding belt dimensions approx. 50 x 2500 mm - Contact wheel diameter approx. 250 mm - Drive 400 V / 5.5 kW - Space requirement approx. W 1350 x H 2050 x D 900 mm - Weight approx. 200 kg

Condition: new, width of the strips 150 mm band length 2280 mm revolutions per minute 2880 U/min roll diameter 140 / 80 mm table-size 700 x 350 mm engine output 3.0 kW weight 250 kg range L-W-H 1300 x 800 x 1500 mm MADE IN GERMANY Isdpfxoxab R Is Akpebb - Machinevideo - ?v=l-XFPai2BAA Furnishing : - Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized belt oscillation approx. 10 mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment included: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley