Used horizontal band saws - automatic - cutting range from 400mm for sale (98)

Condition: new, Year of construction: 2023, saw band length: 5,450 mm, saw band width: 41 mm, Double column bandsaw fully automatic Everising H-460 HB Cutting range round: 0 - 460mm Cutting range square: 460 x 460mm Bundle tension: Width: 195 - 310mm Bundle tension height: 120 - 230mm Drive power: 5.5 kW Saw blade dimensions: 5450 x 41 x 1.3mm Weight: 3030 KG Machine dimensions: 2820 x 2190mm The standard equipment of the machines is as follows: Solid steel construction in double column principle - NC feed system - Frequency-controlled cutting speed (infinitely variable, inverter-controlled) - Digital cutting speed display - Hydraulically controlled double horizontal clamping vices - Hydraulic saw band tensioning - Saw band guides (incl. band back guide) made of carbide - Hydraulically pre-tensioned band guides - Precise PLC control (SPS) for all hydraulic and electrical components. - Cutting counter with automatic switch-off - Automatic out-of-stock switch-off Hsdpfx Asq Ulxgspnefi - Multi-job function - Bundle clamping device - Driven chip brush - Automatic belt breakage control incl. emergency stop - Chip flushing gun - Flexible work light - 2 meter roller conveyor - Tool box - Carbide function Special equipment included: - Variable clamping pressure reduction - Cutting process control Extensive complete German documentation.

Condition: new, Year of construction: 2026, Schnittbereich rund: 420 mm Cutting area, square (W x H): 420 x 420 mm Smallest size that can be cut: 10 x 10 mm Hodpfxewaa A Ss Apnefi Clamping range: 0 - 420 mm Bundle cutting range (min. W x H - max. W x H): 160 x 130 - 260 x 160 mm Shortest length of cut piece : 5 mm Shortest remaining piece length in automatic mode*: 190 mm Shortest remaining piece length in single cut: 20 mm Length: 2220 mm Width including chip conveyor: 3030 mm Height: 2250 mm Weight of machine approx.: 3000 kg Electrical connected load: 11,5 kW Saw motor power: 7,5 kW Hydraulic motor power: 1,5 kW Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 5150 x 41 x 1,3 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyPermanent magnetic synchronisation. MotorSaw arm Anti-collision detectionLED work lightLaser line projectionSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMain drive Precision gearboxSplit vice clampingMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, input voltage: 400 V, input frequency: 5,060 Hz, type of input current: DC, cutting height (max.): 4,115 mm, cutting width (max.): 41 mm, control type: CNC control, overall weight: 1,800 kg, year of last overhaul: 2026, Equipment: documentation/manual, AMADA PCSAW 330 – Automatic CNC Band Saw for Metal Cutting Industrial Automatic Band Saw | CNC Metal Cutting Machine | AMADA Japan For sale: AMADA PCSAW 330 automatic CNC band saw for metal cutting, designed for high-precision and high-volume industrial production. The AMADA PCSAW 330 is a reliable fully automatic horizontal band saw ideal for cutting steel bars, tubes, profiles, and solid materials. Equipped with CNC control, automatic material feeding, Pulse Cut technology, and variable blade speed control, the machine delivers accurate, repeatable cuts with excellent productivity. Manufactured in Japan by AMADA Cutting Co., Ltd., this model is widely used in metal fabrication shops, steel service centers, engineering companies, and industrial production facilities. Key Features & Benefits: ✔ fully automatic CNC band saw for metal ✔ ideal for steel, tubes, profiles, and solid materials ✔ AMADA industrial quality and reliability ✔ CNC touchscreen control system ✔ Pulse Cut technology reducing blade vibration ✔ variable blade speed control (15–120 m/min) ✔ hydraulic operation and automatic feeding system ✔ high cutting accuracy and repeatability ✔ chip conveyor and coolant system ✔ suitable for continuous and serial production Technical Specifications: Manufacturer: AMADA Model: PCSAW 330 Year: 2007 Type: automatic CNC band saw Hedpfx Aey T Ifujpnefi Power supply: 400 V / 3 phase / 50–60 Hz Blade motor: 3.7 kW Hydraulic motor: 1.5 kW Coolant pump: 0.18 kW Pulse Cut motor: 0.2 kW Blade dimensions: 4115 × 41 × 0.9 mm Blade speed: 15–120 m/min Power requirement: 13 kVA Machine weight: approx. 1800 kg Equipment: automatic material feed system hydraulic front and rear vises touchscreen CNC control automatic cutting cycles chip conveyor coolant and lubrication system rapid approach system manual and automatic operating modes Condition: Used machine in very good working condition, fully operational and ready for production. 📩 Contact us for price, additional photos, technical details, or machine inspection.

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, type of input current: three-phase, overall weight: 2,200 kg, coolant pump power: 180 W, saw band length: 4,570 mm, saw band width: 41 mm, AMADA HFA 400 – Automatic Band Saw for Metal Cutting Serial production | AMADA reliability | Industrial use The AMADA HFA 400 is an automatic horizontal band saw for metal, designed for accurate, repeatable cutting in serial production environments. This model combines a compact footprint with a rigid structure and proven AMADA Machine Tools technology. With a solid machine weight of 2200 kg and fully automatic cutting cycles, the HFA 400 is ideal for manufacturing plants, service centers, and tool rooms. ● automatic band saw for metal ● trusted brand AMADA ● rigid construction – 2200 kg ● 5.5 kW saw motor ● industrial hydraulic system ● automatic cutting cycles ● high precision and repeatability Hedpfxoyc H Ewe Apnjfi ● suitable for solid materials and profiles Technical specifications ● Model: AMADA HFA 400 ● Type: automatic band saw ● Saw motor power: 5.5 kW ● Hydraulic motor: 1.5 kW ● Coolant pump: 0.18 kW ● Blade dimensions: -length: 4570 mm - width: 41 mm - thickness: 1.3 mm ● Power supply: 3-phase ● Connected load: 11 kVA ● Machine weight: approx. 2200 kg ● Year of manufacture: 2012 Condition: used, fully functional, ready for operation 📩 Contact us for price and further details.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, input voltage: 400 V, empty load weight: 6,000 kg, coolant pump power: 180 W, saw band length: 7,600 mm, saw band width: 50 mm, AMADA HFA 700 CNC – Fully Automatic Heavy-Duty CNC Band Saw Industrial metal cutting | Serial production | AMADA Japan The AMADA HFA 700 CNC is a fully automatic horizontal CNC band saw for metal cutting, designed for heavy-duty industrial applications and high-volume serial production. Its rigid 6000 kg construction and proven AMADA technology ensure stable, precise, and repeatable cutting results. Key advantages: ● fully automatic CNC band saw for metal ● AMADA – industrial-grade quality ● heavy-duty design, machine weight 6000 kg ● rigid frame minimizing vibration ● 7.5 kW saw motor ● hydraulic blade tensioning ● industrial blade size 7600 × 50 × 1.6 mm ● advanced CNC control – automatic cutting cycles ● ideal for serial production and continuous operation ● suitable for solids, profiles, and bundled materials Technical specifications ● Control system: CNC ● Saw motor power: 7.5 kW ● Hydraulic motor: 2.2 kW ● Coolant pump: 180 W ● Wire brush motor: 200 W ● Blade dimensions: 7600 × 50 × 1.6 mm ● Blade tensioning: hydraulic ● Power supply: 400 V / 50 Hz ● Connected load: 14 kVA Hsdpfxeyc H H Ue Apnofi ● Machine weight: approx. 6000 kg Condition: used, fully functional, ready for operation 📩 Contact us for price and further technical details.

Condition: ready for operation (used), Year of construction: 1986, Behringer 2-column bandsaw semi-automatic HBP 430, year of manufacture 1986, fully operational. Cutting capacity for round material: 430 mm, 90° cuts, hydraulic material clamping and sawing, coolant pump, 2-speed motor with stepless speed control. Roller conveyor 1400 mm with end stop. Space requirement for saw approx. 2700x1100 mm, height 1700 mm. Hodpfx Aew Thv Sspnefi

Condition: good (used), Year of construction: 2011, machine/vehicle number: 152855, Item 25078 Technical specifications: Hsdpfx Apov Say Ajnofi - Cutting area at 90°: round 550 mm - flat 570 x 550 mm - Cutting speed continuously adjustable from 20 to 100 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure continuously adjustable from 0 to 10 m/min - Automatic material feeder - Stop length 500 mm - Total drive power approx. 400 V / 5.7 kW - Stop - 2 x roller conveyors 1000 + 3000 mm - Space requirement approx. W 3400 x H 2100 x D 1300 mm - Weight approx. 2100 kg

Condition: excellent (used), KASTO HBA 420AU Bandsaw Gantry type Automatic Cutting diameter: 420 mm Single material feed: 600 mm Multiple feed: x9 Coolant pump Documentation Weight: 3,400 kg Net Transport possible to any location in the country Hjdpfjxxht Hjx Apnofi Feed table Machine in perfect technical condition!

Condition: new, Year of construction: 2025, Schnittbereich rund: 420 mm Schnittbereich quadratisch (B x H): 420 x 420 mm kleinste zu schneidende Größe: 10 x 10 mm Einspannbereich: 0 - 420 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 160 x 130 - 260 x 160 mm Kürzeste Länge des abgeschnittenen Stücks : 5 mm Kürzeste Reststücklänge im automatischen Betrieb*: 190 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 2220 mm Breite inkl. Späneförderer : 3050 mm Height: 2100 mm Höhe der Materialauflage: 860 mm Weight of machine approx.: 2850 kg Electrical connected load: 9,5 kW Leistung des Sägemotors: 7,5 kW Leistung hydraulischer Motor: 1,5 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 80 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 5150 x 41 x 1.3mm mm Hjdpfxjwqchxj Apnjfi

Condition: new, Year of construction: 2025, Schnittbereich rund: 430 mm Schnittbereich quadratisch (B x H): 430 x 430 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 30 - 430 mm Bündelschnittbereich (Min.B x H - Max. B x H ): - mm Kürzeste Länge des abgeschnittenen Stücks : 25 mm Kürzeste Reststücklänge im automatischen Betrieb*: 170 mm Kürzeste Reststücklänge im Einzelschnitt: 40 mm Length: 2500 mm Breite inkl. Späneförderer : 3900 mm Hedpfswqca Iex Apnefi Height: 2500 mm Weight of machine approx.: 6400 kg Electrical connected load: 17 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 30 - 150 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 500 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 6100 x 54 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyLED work lightSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: new, Year of construction: 2025, Schnittbereich rund: 660 mm Hodpoxrutyofx Apnefi Schnittbereich quadratisch (B x H): 700x660 mm kleinste zu schneidende Größe: 30 x 30 mm Einspannbereich: 20 - 700 mm Bündelschnittbereich (Min.B x H - Max. B x H ): 30 x 30 - 700 x 660 mm Kürzeste Länge des abgeschnittenen Stücks : 20 mm Kürzeste Reststücklänge im automatischen Betrieb*: 400 mm Kürzeste Reststücklänge im Einzelschnitt: 20 mm Length: 3150 mm Breite inkl. Späneförderer : 4300 mm Height: 3080 mm Höhe der Materialauflage: 895 mm Weight of machine approx.: 6400 kg Electrical connected load: 17,8 kW Leistung des Sägemotors: 11 kW Leistung hydraulischer Motor: 2,2 kW Schnittgeschwindigkeit stufenlos regelbar: 20 - 90 m / min Vorschubgeschwindigkeit der Säge: 1 - 300 mm / min Automatische Materialvorschublänge, Einzelhub: 1000 mm Länge des automatischen Materialvorschubs, Mehrfachhub: 9999 mm Abmessungen des Sägeblatts: 8100 x 64 x 1,6mm mm

Condition: new, Year of construction: 2025, Schnittbereich rund: 560 mm Cutting area, square (W x H): 560 x 560 mm Smallest size that can be cut: 100 x 100 mm Clamping range: 100 - 560 mm Bundle cutting range (min. W x H - max. W x H): - mm Shortest length of cut piece : 50 mm Shortest remaining piece length in automatic mode*: 170 mm Shortest remaining piece length in single cut: 40 mm Length: 2300 mm Width including chip conveyor: 5200 mm Height: 600 mm Weight of machine approx.: 11000 kg Electrical connected load: 26 kW Saw motor power: 15 kW Hydraulic motor power: 3,75 kW Hjdpfx Asxu Ay Hjpnofi Cutting speed continuously adjustable: 20 - 80 m / min Feed speed of the saw: 1 - 300 mm / min Automatic material feed length, single stroke: 500 mm Length of automatic material feed, multiple strokes: 9999 mm Dimensions of the saw blade: 8400 x 67 x 1,6 mm Standard configuration Fully enclosed protection according to CE standardJLH-EHASaw MasterCE Electrical safetyLED work lightSaw blade breakage detectionSawing depth controlHMI+buttonsInverterDeviation detectorHydraulic belt tensionerVice differential pressure valvesAutomatic chip conveyor (spiral)Hydraulic belt guide tensionerVice pressure regulatorMotorised chip brushCooling fan for hydraulicsAutomatic lubrication deviceWork table with rollersHydraulic feedMovable guide arm hydraulically clampedChip container 40(L)Tool box (wire brush, levelling pads, spare paint)One-piece saw blade

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t Hfodpfovxwkfox Apnei dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: new, 1000 mm 1000 mm 1200x1000 mm saw band length 11300 x 80 x 1,3 mm table height 790 mm band speed 14 - 60 m/min total power requirement 18 kW weight of the machine ca. 9,0 t dimensions 5,0 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and Hsdpfjt Eacgjx Apnsfi thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), MANUFACTURER: DANOBAT S. Coop. Ltda. YEAR OF CONSTRUCTION: 1988 SERIAL NO.: 35 POWER IN KW: 28 Table size: 2000 x 600 mm Indexing table: 600 mm Automatic Feed / Creep / Cycle X-travel: 3000 mm Y-travel: 1 mm Z-travel: 650 mm Hsdpfx Apsyr S Tlenofi Table length: 3000 mm Table width: 1000 mm

Condition: used, Year of construction: 2000, machine/vehicle number: 300584, power: 7.5 kW (10.20 HP), cutting height (max.): 360 mm, cutting width (max.): 400 mm, Equipment: CE marking, documentation/manual, High-performance, heavy-duty automatic horizontal bandsaw from premium German manufacturer Behringer. Designed for precise and cost-effective cutting of solids, tubes, and profiles. Key Features: Stable Dual-Column Design: Twin-pillar construction guarantees vibration-free operation, geometric accuracy, and maximum blade life. Fully Automatic Operation: Equipped with a hydraulic material feed system and automated clamping vices for mass production cycles. Behringer NC Control: Original digital operator panel for easy programming of cutting lengths and batch sizes. Hfsdpfx Apjzbg E Ienoi Condition: The machine is in fully operational condition, regularly maintained, and currently located in an active production workshop environment. CE certified.

Condition: used, Year of construction: 1999, functionality: fully functional, KALTENBACH Saw and Drilling Line – KBS 851 DGNC + APS 1003 – up to 1,000 mm – Year of Manufacture: 1999 General Information: Manufacturer: Kaltenbach Hfedpfsyak Ansx Apnei Machine Type: Automatic saw and drilling line for steel profiles Bandsaw: KALTENBACH KBS 851 DGNC Drill Line: KALTENBACH APS 1003 Year of Manufacture: 1999 Condition: Used, fully functional Location: Germany Availability: Dismantling possible from mid/end of March 2026 Inspection: The system is operational and can be inspected under power Sale: Without guarantee or warranty Machine Description: For sale is a complete Kaltenbach saw and drilling system for processing heavy steel profiles. The line consists of a CNC-controlled bandsaw KBS 851 DGNC as well as a drilling unit APS 1003, including extensive infeed and outfeed roller conveyors and cross transfer conveyors. The system is currently in operation and has been reliably used in steel construction until now. It is ideally suited for efficient processing of beams and profiles in both series and project work. Typical Areas of Application: - Steel construction / hall construction - Metalworking - Beam processing (IPE, HEA, HEB, UPN, etc.) - Series and single-part manufacturing Technical Data: Bandsaw KBS 851 DGNC: - Maximum beam height: up to 800 mm - Mitre cutting: swivelable on both sides +45° / –45° - CNC-controlled length positioning - Automatic sawing mode Drill Line APS 1003: - Maximum beam height: up to 1,000 mm - CNC-controlled profile processing via drill portal - Suitable for web and flange machining Roller Conveyors & Material Handling: - Roller conveyor width: 1,000 mm - Infeed roller conveyor: approx. 15,000 mm - Outfeed roller conveyor: approx. 15,000 mm - Infeed cross transfer conveyor: approx. 4,000 mm - Outfeed cross transfer conveyor: approx. 4,000 mm Condition: - System is complete and fully functional - Currently in operation - Age and usage-related signs of wear - Sale as is - No guarantee or warranty Scope of Delivery: - Bandsaw KBS 851 DGNC - Drill line APS 1003 - Infeed and outfeed roller conveyors - Cross transfer conveyors (infeed and outfeed) - Control cabinet / operating unit - Existing safety devices - Documentation where available Dismantling & Loading: - Dismantling to be carried out by the buyer - Dismantling possible from the end of March 2026 - On site available: * Forklift truck * 2 gantry cranes each with 5 t lifting capacity - Good site access and loading conditions

Condition: new, Year of construction: 2026, The CORMAK H500SA automatic bandsaw is a technologically advanced double-column metal bandsaw designed for precise and efficient cutting of large steel components, tubes and profiles. With complete process automation, high cutting power and a durable structure, it performs perfectly in serial production and heavy-duty industrial operations. Main Advantages Automatic cutting cycle – the full cutting sequence from loading to arm return is performed without operator involvement. Hydraulic vice and material feed – ensuring fast, firm and precise clamping and feeding of the workpiece. High cutting capacity – suitable for materials up to Ø500 mm or 500 × 500 mm. Hydraulic blade tensioning – automatically maintains optimal tension for stable cutting performance. Cooling system and powered cleaning brush – extend blade life and improve surface quality. Construction and Technology The machine is based on a heavy-duty cast-iron and steel structure providing high rigidity and minimising vibrations during operation. The double-column design of the H500SA ensures cutting precision and long-term durability. Equipped with a 7.1 kW main motor and an independent hydraulic system, it delivers reliable performance under continuous use. The frame is inclined at a 3° angle to the work surface for more effective cutting of profiles and sections. The blade is guided by carbide-insert and roller bearings that ensure perfect blade tracking. The movable guide head automatically adjusts to the material width, enhancing stability and reducing blade wear. Precision and Productivity Hydraulically controlled arm feed with smooth pressure adjustment allows precise adaptation to the material being cut. The LCD control panel enables programming of the number and length of cut pieces, as well as real-time monitoring of cutting parameters. The machine automatically detects the end of material, faults, and operation status, ensuring uninterrupted production with maximum efficiency. Applications The CORMAK H500SA is an industrial metal bandsaw recommended for: Steel structure fabrication plants Serial production in metal workshops Cutting heavy steel pipes and profiles Large-scale steel processing and tool steel cutting operations Standard Equipment Full automatic cutting cycle Arm and vice position memory Hydraulic unit and feed system Hydraulic blade tensioning Powered blade cleaning brush Coolant circulation system Bimetal bandsaw blade CE Declaration of Conformity Technical Data Cutting range Ø500 mm or 500 × 500 mm Blade dimensions 5550 × 41 × 1.3 mm Blade speeds 40 / 60 / 80 m/min Main motor power 7.1 kW Hydraulic power unit 1.5 kW Coolant pump 0.09 kW Blade tensioning Hydraulic Feeder stroke 500 mm Load capacity 3 t Table height 600 mm Hjdpjyctwmefx Apnsfi Machine dimensions (L × W × H) 2900 × 2200 × 1900 mm Weight 2400 kg

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 41 mm, saw band length: 6,880 mm, Fully automatic horizontal mitre saw for cuts from +60° to -60°, equipped with Siemens control system and 2000 mm material feeder - Dual-column guided horizontal bandsaw for cutting solid bars and bar profiles - Siemens S7-1500 control with extensive functionality, operated via a 7'' touchscreen display Hodpfx Ajx Uk Arspnjfi - Standard with 2000 mm material feeder -> frequency-controlled feed via ball screw and servomotor - Material database with preset sawing parameters and characteristic curves - Sawing movement via ball screw and servomotor - With ARP (automatic cutting feed regulation) -> automatic saw blade feed based on material resistance. The feed rate is continuously adjusted to the current cutting load. ARP enables shorter processing times and longer saw blade service life. - Automatic positioning after entering the desired angle - Hydraulic clamping of the turntable allows for precise angle cuts - Robust machine frame and minimal distances between the saw blade, machine guideways, and workpiece minimize vibrations for optimal cutting performance - Infinitely variable cutting speed from 15 to 150 m/min - Saw drive via bevel gearbox, asynchronous motor, and frequency inverter - For straight cuts, clamping of the material before and after the cut via split vise - Adjustment of hydraulic vise pressure via a control valve with pressure gauge - 7° saw blade inclination and hydraulic band tension increase blade service life - Front blade guide automatically moves parallel to the movable vise jaw - Swarf removal brush driven by blade wheel - Emulsion cooling with fluid distribution to the blade guides and directly into the cutting channel - LEUZE safety light barrier in front of the machine and material feeder - More powerful motor available as an option - Blade guides with integrated cooling system

Condition: used, Year of construction: 2007, DOALL Hedpfxew U N I Eo Apnsfi TYPE: C4100 NC AUTOMATIC FEED YEAR: 2007

Condition: excellent (used), Year of construction: 2019, operating hours: 4,135 h, overall weight: 3,500 kg, table height: 740 mm, coolant pump power: 1,500 W, saw band length: 5,300 mm, saw drive: 5,500 W, Saw from the year of production 2019 / post-show saw - first launch in 2021. Saw in very good technical and visual condition. Hfsdpfx Ajuiu Sijpnsi Technical parameters in the photo above. Price without rollover.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, operating hours: 11,000 h, 1. Applications & Design Designed as a horizontal bandsaw with a table layout, this machine is ideally suited for use in forges, rolling mills, die casting operations, steel finishing facilities, and tool & mold manufacturing environments. Its low table height enables installation directly on standard shop floors, simplifying material transport and handling. 2. Cutting Capacity Cutting range for round material (90°): up to 1,100 mm Cutting range for flat material (90°): up to 1,100 × 1,100 mm (Approximately 43.3 × 43.3 inches) 3. Performance & Drive System Drive power: 15 kW Saw blade speed: Infinitely adjustable between 8 – 84 m/min Total installed power: 30 kW Saw blade dimensions: 14,330 × 80 × 1.6 mm 4. Table Specifications Table size (L × W): 3,000 × 1,500 mm Maximum table load: up to 30,000 kg Workpiece support height: 700 mm 5. Machine Footprint & Weight Hfedpew Tulgsfx Apnsi Overall length: 6,000 mm (approximate) Width: 8,100 mm (approximate) Height: 3,850 mm (approximate) Machine weight: around 16,000 kg 6. Notable Features & Options Independent traversable clamping system: Both the material clamping vice and the blade guide arms are independently movable, allowing large or oversized workpieces to be securely clamped without manual repositioning to a fixed side. Robust gantry frame: Two solid columns and support bars provide excellent stability, high load capacity, low vibration operation, and long service life. Optional 90° blade guide rotation: Allows both vertical and horizontal cutting, especially useful for notching sample workpieces. Powered duplex chip brushes: These automatically adapt to keep the saw blade clean during operation, enhancing blade life and reducing maintenance of the brushes. Integrated chip conveyor with coolant tank: Located beneath the cutting zone – collects chips and coolant, can be pulled out easily for cleaning. Open-access design for easy maintenance: All wear and maintenance parts are easily accessible, simplifying servicing, blade changes, and minor repairs. No foundation work required for installation.

Condition: used, Year of construction: 2005, functionality: unexamined, Kaltenbach KBS 620 DG — Horizontal Double-Mitre Band Saw, Year 2005 Specifications Cutting capacity 90°: 620 x 350 mm Cutting capacity 70°: 610 x 350 mm Cutting capacity 60°: 570 x 350 mm Cutting capacity 45°: 470 x 350 mm Cutting capacity -45°: 430 x 350 mm Mitre range: +60° / -45° (double mitre) Blade dimensions: 6175 x 41 x 1.3 mm Hfsdpjyrgrpofx Apnsi Blade types: Bi-metal M2, M42, M51 Cutting speed: 15–90 m/min (steplessly adjustable) Feed rate: max. 400 mm/min Construction: Double-column, heavy-duty steel frame Control: NC-controlled mitre angle setting Software: Kaltenbach PROFICUT Cooling: Air cooling + micro oil lubrication Weight: approx. 2,600 kg Features: Suitable for cutting steel profiles, tubes, and flat bars. Hydraulic clamping after angle adjustment, steplessly adjustable blade feed, NC-controlled length measurement.