Used Horizontal band saws - automatic - cutting range 0-299mm for sale (117)

Condition: good (used), Year of construction: 2003, Used fully automatic band saw from Danobat Itsdpfx Aowc Niyjacjn Type: CR 260 AF Round capacity: 260 mm Automatic chip conveyor Year of manufacture: 2003

Condition: used, Year of construction: 2015, 1 used automatic band saw Manufacturer: Mebapro 260 AP Year of manufacture: 2015 Technical data: Type: Straight cutting saw 90° Max. cutting width (mm): 300 Max. cutting height (mm): 260 Max. cutting diameter Ø (mm): 260 Cutting speed: 15 - 150 m/min Minimum remaining workpiece length: 20 mm Saw band drive power: 1.5 kW Saw band tension: Mechanical Saw band dimensions: 3700x27x0.9 mm Working height: 750 mm Weight: 1050 kg Dimensions: 1500x1800x1850 mm NC-controlled, automatic material feed with hydraulic total-stroke clamping Easy operation via NC control with plain text display Material pre-positioning function without reclamping for short lengths Stable, linear-guided feed vice with servo positioning for maximum accuracy Automatic band guide adjustment to material width Powered chip brush, synchronized with band speed Isdpfxsxfiu Se Aacjtn

Condition: used, Year of construction: 1981, cutting diameter 250 mm dimensions of saw-band 3505 x 25 x 0,95 mm Iodpfx Ajv Ehfaeacetn table height 450 mm cutting speed 10 - 110 m/min total power requirement 3 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 2,0 x 2,2 x 1,4 m Fully automatic band saw - including chip conveyor

Condition: excellent (used), The fully hydraulic production rapid-frame bandsaw features a universal hydraulic system for either exclusive or alternating cutting of thin- and thick-walled profiles as well as solid material, without the need to change the saw blade, using a standard tooth pitch of 3 or 4 teeth per inch. It is equipped with a pre-tensioned bow guide, enclosed oil hydraulics, three-position pivot bearing, separate coolant system, infinitely adjustable hydraulic cutting pressure, lift-off movement, accelerated return stroke, and comes standard with a continuously adjustable mitre device. Rapid traverse for saw bow lifting. The oscillating vice ensures optimal use of the saw blade. Longitudinal guide with ground and hardened guide rails transfers cutting pressure forces to the saw bow. Automatic end-stop shutdown. Push-button controls for ON, OFF, and rapid traverse lifting of the saw bow. Itjdpfsxdwbkox Aacsn Manufacturer: KASTO Model: Metal Frame Bandsaw Machine type: PSB 280 U Drive power: 2.2 kW Stroke rates: 40/51/64/80/102/128 per min Cutting speeds: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: Hydraulic Round cutting capacity: 280 mm Flat cutting capacity: 280 x 150 mm Mitre adjustment: 0–45° Material support height: 600 mm Weight: 650 kg Dimensions (L/W): 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: Coolant equipment, rapid traverse lowering, rapid traverse raising.

Condition: ready for operation (used), functionality: fully functional, cutting speed: 100,000 mm/min, cutting range round steel at 90°: 360 mm, cutting range square steel at 90°: 360 mm, empty load weight: 2,300 kg, Equipment: chip conveyor, TECHNICAL DETAILS Working range round: 360 mm Working range square: 360 x 360 mm Bundle working range (W x H): 180 - 280 x 50 - 160 mm Cutting speed: 20 - 100 m/min (stepless) Saw blade dimensions: 4,420 mm x 34 mm x 1.1 mm Saw blade tensioning: hydraulic Multiple feed: 500 mm MACHINE DETAILS Drive power: 3.7 kW Dimensions & Weight Machine dimensions (L x W): 2,500 x 2,200 mm Machine weight: 2,300 kg EQUIPMENT Hydraulically controlled full-stroke double vise clamping system Drive by IE3 motor with frequency inverter (PMSM, equivalent to IE4) User-friendly PC control with touch screen Feed speed displayed on HMI (10" HMI display) Automatic chip conveyor Itsdpfxoxculwo Aacsn Automatic shuttle feed IC board control for all electrical and hydraulic functions Floating swing vice Two-part front vice Stepless speed control via inverter Hydraulic blade tensioning Roller bearings with hydraulically controlled carbide blade guide system Automatic working height control via quick start sensor Preset cutting counter with shutdown function Nesting device for bundle cutting (hold-down) Power-driven blade cleaning brush Saw blade monitoring for standstill and blade breakage Rinse hose for machine cleaning Work light Roller table, 2 m in length One M42 bi-metal bandsaw blade One set of tools and a toolbox Full cover

Condition: used, Year of construction: 1989, functionality: fully functional, Machine with multiple feed up to 9,999 mm Cutting diameter 10-250 mm Saw band 34x1.1 mm Isdpfx Asxa Ebkoacetn Includes chip conveyor and roller track Counter is defective

Condition: new, cutting diameter 230 mm capacity 90 degrees: flat 230 x 230 mm capacity 90 degrees: square 230 x 230 mm vice 235 mm turning speed range: 15 - 100 m/min dimensions of saw-band 2950 x 27 x 0.9 mm Control MEP CNC Itjdpfexabq Uox Aacsn total power requirement 3.18 kW weight of the machine ca. 1175 kg dimensions of the machine ca. 1980 x 1105 mm * Automatic two-column band saw with a footprint of only 2.5 square meters * * Highest performance in the smallest space * Features : - powerful CNC automatic band saw in two-column design * for cuts at 0° - with Windows-CE based touch screen control * 5.0 - 180° tiltable control panel * Up to 100 cutting programs, each with different quantities and lengths * Minimizes programming time for frequently executed jobs - 2x operating modes (semi-automatic and automatic) * enable efficient cutting under all conditions - Saw head feed via linear guides driven by hydraulic cylinders . with preloaded recirculating ball bearings * Reduction of mechanical vibrations during cutting - Automatic alignment of the front saw blade guide head * Reduces processing time - feed system with 600 mm stroke is repeatable and cuts all lengths - vertical pair of rollers can cut any type of bar or bundle material - infinitely variable blade speed adjustment from 15 to 100 m/min - robust cast iron structure (G25) to compensate for vibrations - Safety housing in accordance with the latest safety regulations . the Machinery Directive EN 13898/2007

Condition: used, Year of construction: 2002, cutting diameter 260 mm dimensions of saw-band 4115 x 41 x 1,3 mm cutting range square 260 x 260 mm weight of the machine ca. 2,2 t Remaining piece length: 80 mm Smallest diameter that can be sawn: Ø 8 mm Smallest cut length: 8 mm Minimum remaining piece length, single cut: 30 mm Minimum residual piece length, automatic mode: 80 mm Maximum automatic material feed: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Belt speed: infinitely variable 15–125 m/min Cutting feed: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Itedpsxa Hk Tefx Aacon Equipment: Vibrating table Belt tension monitoring Roller conveyor 3500 mm(roller drive via hand wheel) with guide rollers roll width approx. 320 mm Chip conveyor Subject to errors in the technical data Translated with (free version)

Condition: used, Year of construction: 2004, cutting diameter 460 mm cutting speed 18 - 115 m/min cutting width 460 mm 650 mm saw band length 6050 x 41 x 1,3 mm total power requirement 4,7 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 2,2 x 1,7 x 2,2 m Itsdewz Ru Iopfx Aacen Automatic band saw - Material feed up to 400 mm, multiple feeds possible. - Coolant system

Condition: reconditioned (used), Year of construction: 2000, functionality: fully functional, saw band length: 4,115 mm, saw band width: 41 mm, total height: 20,000 mm, total length: 20,000 mm, total width: 20,000 mm, power: 0.004 kW (0.01 HP), Fully hydraulic high-performance bandsaw in an extremely robust design, featuring a horizontally and parallel traversing saw blade, for cutting profiles, pipes, and solid materials of all qualities, including materials that are extremely difficult to machine (e.g. titanium, Inconel, Hastelloy). Suitable for use with bi-metal and carbide-tipped saw blades. The saw head is made from solid polymer concrete, ensuring exceptional vibration damping and maximizing the service life of the saw blades. The saw unit is guided via a vertical and a round column (double column guide) fitted with hardened and ground guide strips. Hydraulic saw blade tensioning and hydraulically preloaded carbide saw blade guides provide additional precision and performance. Material clamping is accomplished with two hydraulic vices. The machine is user-friendly thanks to its intuitive controls. Cutting length is set using a handwheel, with a resolution of 0.1 mm. The piece count can be preset via a counter; the machine automatically switches off once the specified quantity is reached. Material feed is handled by a hydraulic feed cylinder, guaranteeing highest cut length accuracy. The machines are easy to operate and work fully automatically. SSB 260 VA 260 mm x 260 mm (Ø 260 mm) Technical Data: Bandsaws KASTO Bandsaw Automatic Machines Machine Type: SSB 260 VA Technical Specification: Double column guided Year of manufacture: 2000 Cutting range: 260 x 260 mm Drive power, saw gearbox: 4 kW Drive power, auxiliary units: 6.5 kW Cutting speed: 15–125 m/min Saw feed, hydraulics: Infinitely adjustable Saw blade dimensions: 4115 x 41 x 1.1 mm Feed length: 600 mm Max. multi-stroke feed: 5400 mm Itodpfx Aaexc D Egscon Material infeed height: 850 mm Machine dimensions: Length/Width: 1690 x 1900 mm Height: 2030 mm Machine weight: 2100 kg Accessories: • Chip conveyor • Coolant system • Multi-stroke feed • Side guide rollers • Machine roller conveyor • Adjustable side guide rollers • Prepared for bundle clamping device • Multi-feed counter

Condition: excellent (used), Year of construction: 2025, operating hours: 100 h, functionality: fully functional, machine/vehicle number: 350-14, saw band length: 3,660 mm, saw band width: 27 mm, feed length X-axis: 490 mm, type of input current: AC, cutting width (max.): 300 mm, table height: 715 mm, cutting height (max.): 150 mm, space requirement width: 2,000 mm, space requirement length: 1,600 mm, space requirement height: 1,800 mm, empty load weight: 1,175 kg, remaining piece length: 150 mm, The WOS 280X300 model is an automatic bandsaw. Thanks to hydraulic hold-down devices, the machine is capable of performing bundle cuts. Linear guides ensure precise cuts. After the length of material to be cut and the desired quantity are entered via the PLC control panel, the machine automatically adjusts the cutting length using an encoder and cuts the specified quantity. The feed clamping devices automatically transport the material to the pre-set length. Up to 20 different cutting sizes can be programmed on the screen. The control panel can store up to 50 different job lists, which can be accessed at any time. Ideally suited for bundle cutting. PLC control panel for: automatic operation manual cuts Frequency inverter drive Adjustable descent speed Adjustable vise pressure (manometer) Single-sided movable vises with fixed jaw Iedpsxldngofx Aacstn Hydraulic blade tensioning Rotating chip brush Chip conveyor 2 saw blade guides with carbide inserts 1.5 m roller table with lateral guide rollers Monitoring and automatic stop in case of: open covers saw blade breakage or blockage low blade tension

Condition: good (used), Year of construction: 2006, Immediately available - affordable Hydraulic Band Saw Automatic Manufacturer: Kasto Model: TWIN A 2 Year of manufacture: 2006 Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Total weight approx. 1,700 kg Total drive power 5 kW Saw motor drive power 3 kW Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Maximum single feed length: 750 mm Multiple feed up to: 9,999 mm Ijdoxdag Njpfx Aacotn Shortest cut-off length: 6 mm Smallest diameter to be cut: 10 mm Minimum remnant in single cut: 15 mm Shortest remnant length in automatic mode: 100 mm Cutting speed, steplessly adjustable: 20 - 100 m/min Saw blade dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: steplessly adjustable Data subject to verification Comes with: • Floor pan (under the machine) • Chip conveyor • Operating manual • Additional machine table (support) in front of the unit Immediately available ex stock 78234 Engen

Condition: used, Year of construction: 2005, cutting diameter 270 mm saw band length 2925 x 27 x 0.9 mm capacity 90 degrees: flat 350 x 240 mm capacity 45 degrees: round 230 mm capacity 45 degrees: flat 230 x 150 mm capacity 60 degrees: round 140 mm capacity 60 degrees: flat 140 x 140 mm table height 740 mm cutting speed 36 + 72 m/min clamping range max. 355 mm total power requirement 2.0 kW weight 1180 kg range L-W-H 2150 x 2400 x 1900 mm Equipment: - Metal band saw - Fully automatic with one-sided miter adjustment - Multifunction digital control panel Iedpfxexaarwj Aacotn - Programmable work cycle - Help and self-diagnosis in the event of malfunctions - Coolant system - Saw blade guide with hard metal plates - Hydraulic saw frame lowering - Automatic raising and lowering - Band tension with pressure gauge - Hydraulic vice clamping - Operating instructions (ENG)

Condition: ready for operation (used), Year of construction: 2014, MACC CNC Mitre Band Saw Fully Automatic Equipment: - Infeed roller conveyor, length 1.50 m - Additional roller conveyor, length 2.50 m - Speed: 38–77 min⁻¹ Itjdpfxexbd D Ts Aacsn - Saw blade: 3010 x 27 x 0.9 mm - Bundle clamping device - CE conformity - Weight: 960 kg - Documentation

Condition: used, Year of construction: 2002, cutting diameter 305 mm cutting speed 35 / 70 m/min cutting width 350 mm Itodpfx Aaew Tdw Sscsn 515 / 14500 mm saw band length 3370 x 27 x 0,9 mm total power requirement 1,8 kW weight of the machine ca. 0,85 t dimensions of the machine ca. 1,8 x 1,9 x 1,9 m Automatic band saw - Material feed single up to 515 mm, multiple up to 14,500 mm - Coolant system - Replacement saw blade

Condition: ready for operation (used), Year of construction: 1986, saw band length: 450 mm, cutting height (max.): 280 mm, cutting capacity 280 mm band length 450 mm double hydraulic vise Itsdpjxbhm Ssfx Aacsn

Condition: good (used), Year of construction: 2007, total height: 700 mm, Smallest diameter 10 mm Shortes length singel stroke 15 mm Shortes length automatic mode 100 mm Isdpfx Aaew R Squjcjtn Working height 700 mm Max. stroke 9999 mm Control panel  Memory 99 program with  Bundel clamp device  New price 45.000 Capacity 90°:260° Length: 1800mm Width: 2475mm Height: 1600mm Weight: 1700kg

Condition: used, Year of construction: 2000, machine/vehicle number: 6510 114 214, saw band length: 4,115 mm, saw band width: 41 mm, Metal Band Saw KASTO SSB 260 VA Manufacturer: KASTO Model: SSB 260 Series 114 (vertical) Year of manufacture: 2000 Technical Data: Round cutting capacity: 260 mm Square cutting capacity: 260 x 260 mm Smallest diameter to be cut: Ø 8 mm Minimum cutting length: 8 mm Minimum remnant length per single cut: 30 mm Minimum remnant length in automatic mode: 80 mm Automatic material feed, single stroke max.: 600 mm (modified for repeat accuracy of +/- 0.2 mm) Band speed: infinitely variable, 15 - 125 m/min Feed rate: infinitely variable Material clamping: hydraulic, clamping pressure adjustable Total connected load: 6 kW Machine weight: 2.0 t Saw blade dimensions: 4115 x 41 x 1.3 mm Special Features: - Electrically driven vibrating table - Band tension monitoring - 6 m roller conveyor with laterally adjustable guide rollers - Swarf conveyor with extra high discharge, especially designed for materials producing long chips. Accessories: - Combined welded base frame for machine and roller conveyor, suitable for installation on non-contiguous foundations. With tightly welded drip tray under the main machine. - Swarf trolley Itsdpoxmv Nljfx Aacjn - Drip tray with grating and tightly welded base under swarf trolley Fully functional, in good overall condition. Price: Negotiable plus VAT (no warranty)

Condition: used, Year of construction: 1991, cutting diameter 320 mm cutting speed 20 - 100 m/min cutting width 320 mm 400 mm saw band length 3660 x 34 x 1,1 mm total power requirement 2,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,8 x 2,0 x 1,5 m Automatic band saw - Material feed up to 400 mm, multiple feeds possible; max. 10 times - Coolant system - Piece counter Itedpfx Aaswkvtuscsn - Material support stand

Condition: used, Year of construction: 1993, cutting diameter 260 mm cutting width 400 mm capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation Isdpfx Aov T Nrksacetn

Condition: used, cutting diameter 250 mm cutting speed 10 - 70 m/min band speed 10 - 70 m/min 400 mm Iodpfxswg Sfro Aacstn saw band length 3660 x 27 x 0,9 mm total power requirement 3,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 2,0 x 1,7 x 1,7 m inkl. Dokumenmtation

Condition: used, Year of construction: 1994, cutting diameter 260 mm cutting width 400 mm Itsdpfx Aexf I Uqeacsn capacity 90 degrees: flat 400 x 260 mm capacity 90 degrees: square 260 x 260 mm capacity 45 degrees: round 260 mm band speed 17 - 110 m/min engine output 3,5 kW dimensions of saw-band 3830 x 25 x 0,9 mm weight of the machine ca. 1,3 t dimensions of the machine ca. 2,1 x 2,0 x 1,6 m High-performance fully automatic band saw with - coolant system - documentation

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 250 Super VA-I MPS • Miter left. 45° automatic operation • Miter left. 60° semi-automatic operation (cuts without programming) • Shockproof and ergonomic control panel with oil-proof EPDM cover a. • Material height sensor c. (Automatic cut start detection) • Frame and gearbox made from one piece, very quiet cutting and very low vibration • Chip tray can be removed (disinfection) • Easy access to the saw, material and feed unit • Foldable safety cover • Fine feed adjustment • Semi-automatic. Cut! Saw automatically with microprocessor control Adjustable for 2 program levels Semi-automatic operation Iodjd Iip Aopfx Aacetn Fully automatic operation Start after entering the desired number and length: material cut- Cutting execution and piece counting until the program is fulfilled • MPS control for entering the desired number of feeds • All important machine data is shown on the LED display during the Cutting process displayed (power consumption, cutting time, number of pieces) • The entered data is in RAM memory • The autodiagnostic circuit automatically shows all irregularities as an error message and checks the entire process • Feed unit mounted floating. • Length adjustment via handwheel and vernier with mechanical position indicator. Adjustable for section lengths from 2.5 mm to 420 mm or through Automatic reversing can be repeated 1 - 29 times, remaining piece length 210 mm

Condition: new, 230 mm 230 x 230 mm saw band length 2950 x 27 x 0,9 mm table height mm band speed 15 - 100 m/min total power requirement 2,2 kW weight of the machine ca. 1,2 t dimensions m SHARK 230-1 NC HS 5.0, electro-hydraulic two-column fully automatic band saw with Itjdpfxefg E Hyo Aacsn semi-automatic function for 0° cuts of mild steel, stainless steel, Steel alloys, solid and profile material, with a maximum remaining piece length of 60 mm. - The cross section is max. 230x230 mm. - Numerically controlled band saw machines with the new, specially designed by MEP developed for Automatic Windows “CE” based E FEATURES: - User interface with 7” touch screen display and mechanical buttons for the operating functions of the sawing machine, guaranteed reliable Operation, simple and intuitive, and real-time control of all Cutting parameters. - Safety enclosure in accordance with the latest safety regulations Machinery Directive EN 13898/2007. - New fieldbus communication system with double microprocessor Serial connection. - Robust cast iron structure (G25) to compensate for vibrations Improve machine stability and protect the saw band

Condition: new, capacity 90 degrees: round 255 mm capacity 90 degrees: square 240 mm 300 x 180 saw band length 2.765 x 27 x 0,9 mm mm table height 870 mm band speed 18 - 110 m/min Control CNC total power requirement 1,5/1,8 kW weight of the machine ca. 0,63 t dimensions of the machine ca. 1,8 x 1,85 x 1,85 m Miter band saw, fully automatic GBS 255 Super VA-I CNC • miter left 45° automatic operation • miter left 60° semi-automatic operation (cuts without programming) • Material height sensor (automatic cut start detection) • Frame and gearbox made from one piece, very quiet cut and very low vibration • Removable chip tray (disinfection) • Shockproof and ergonomic control panel with oil-resistant EPDM cover • High performance positioning with incremental encoder (CNC) c. Itsdpfjd Iipzex Aacon • Top access to the saw, material and feed unit • Hinged safety cover • Fine feed adjustment • Semi-auto. Cut! • Optimize work processes with CNC control Possibility to enter various parameters such as quantities and material lengths, automatic calculation of the cutting channel • CNC control for 10 different saw programs with 99 sub-programs for different lengths and quantities, e.g. 1 cutting program with various section lengths • Automatic feed unit (CNC) via ball roller spindle incremental feed with automatic length compensation. Adjustable for section lengths of 2 mm to 9,999 mm, remainder length 170 mm.